How can I replace the window shadows with a simple border?

Is there any way to change the shadow that's between windows with a simple 1px border?
When using multiple windows the shadow makes it hard to read the text in the "lower" window and removing the shadow using ShadowKiller removes the shadow entirely making it impossible to see the difference between 2 windows.

yes i can found the words's unicode form Cmaps where may be at the type of tounicde and another Cmaps table just like "Adobe-GB1-GBK-EUC" ,but when the word dont have either of them how can i do? when i write a chinese word "一",it just the winansi encoding , there is not Cmap for me to use to change the "G208f" to the word "一"'s unicode value.
best wishes thank you very much

Similar Messages

Since I am writing the book in Italian,how can I replace the word CHAPTER with CAPITOLO ?

Since I am writing the book in Italian, how can I replace the word CHAPTER with CAPITOLO ?

I think you need to run iBA in Italian so the templates are in that language. You can do that by switching your OS X to Italian and then reopening iBA or perhaps by using this app to just change the iBA language:
http://www.tj-hd.co.uk/en-gb/languageswitcher/
see also
https://discussions.apple.com/message/20745332#20745332

In my iCloud e-mail account on my iPad, how can I replace the Trash button with an Archive button?

Apologies if this is a simple question, I can't seem to find anything that might have changed it.

Looks like you can archive icloud emails :
- go into Settings > Mail, Contacts, Calendars
- select the icloud account on the right-hand side of that screen
- tap Account (which should have your address next to it) at the top of the next screen
- tap Mail (under 'Advanced') on the popup
- tap Advanced at the bottom of the next popup
- and on the next screen there should be a 'Move Discarded Messages Into' setting
I didn't know that setting was there until you said that you had archive on your phone.

How can I sync the ipod touch with windows 7 64 bit

How can I sync the ipod touch with Outlook on windows 7 64 bit?

I'm having the same problem with Windows 7, iTunes has been spotty about recognizing my iPod Touch. Now that I've updates Windows 7 with Service Pack 1 (June 2011), It won't complete a sync or a restore at all on either of my Windows 7 computers.
I have gone through every troubleshooter action recommended by Apple Support, and have not been able to improve the situation at all.
I took my Touch to the Genius Bar at my local Apple Store after trying and failing to complete a restore while troubleshooting, and it restored just fine from a Mac. Unfortunately, it now gives me an error meesage (Incompatible device) half way through an attempted sync, or iTunes simply freezes.
I even tried removing the Windows SP1, but that was a mess, as my display went all whacky and iTunes crashed immediately upon startup.
The Windows 7 OS ***** in general, particularly with compatibility issues, and not just for Apple products.
Does anyone know how to remedy this situation?
I'm so frustrated and have wasted so much time on this issue that I'm going to throw it all out the window!
HELP!!!!!!

Help with Adobe.premiere.elements12. Please It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos wi

Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.

In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along.

How can i replace the standard ESS iview with my own iview

I want to replace standard ESS addr iview with my own WD developed by ABAP
I added the iview(my WDA) into standard ESS addr page.
(pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.cn/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr)
And make it visible.
But I got this error in ESS PA addr :
WebDynpro Exception: Application PER_ADDRESS_CN Does Not Exist
Here is the error code :
Error code：ICF-IE-http-c:100-u:AC_WANGFZ-l:1-s:CE1-i:SAPCE101_CE1_01-w:0-d:20070514-t:172301-v:RABAX_STATE-e:UNCAUGHT_EXCEPTION
So , how can i replace the standard ESS iview with my own iview?
Thanks

Can you see any Javascript EPCF code in the old iView ? You are surely just going to have to find it (if our hunch is correct) and analyse it and copy it into your new iView so that it functions in some way that at least does not error

How can I replace the old commenting system with Disqus?

How can I replace the old commenting system on Business Catalyst with Disqus? Please help

Hi,
The Disqus integration has been done by at least one BC partner – simpleflame.com, on this site: http://kiyuco.com/free-videos . You could reach out to them inquiring for more details on how it has been done.
Kind regards,
-Sidney

How can I replace the out of the box photos with my own when music is playing?

How can I replace the out of the box photos with my own when music is playing?

Welcome to the Apple Community.
Select any photos you want to share with the Apple TV using the iTunes advanced menu (using iPhoto is the better option but a folder will work). Once all the photos you want are shared, go to settings > screensaver on the Apple TV and choose which of those shared photos you want to use with your screensaver.

My old MobileMe account surfaced when I was on a support call. I didn't discover it until the case was closed. How can I replace this obsolete account with my current iCloud account?

My old MobileMe account surfaced when I was on a support call. I didn't discover it until the case was closed. How can I replace this obsolete account with my current iCloud account?

Do you mean that you were using the Apple ID which is your ex-MobileMe address? It's still an Apple ID, even though MobileMe itself is dead, and there's nothing to stop you from using it as an ID with Support, or logging in here or in iTunes with it. You should make sure you have a functioning non-Apple email address associated with it.
Did you migrate your MobileMe account to iCloud before 1 August last? If so, you can set up an iCloud account using it, or if you have already set up a new and separate iCloud account you can still log in with it in System Preferences>Mail, Contacts and Calendars so that it runs alongside your iCloud account.
If you didn't migrate you can still reactivate the address the same way.
Anything where you've logged in with the ex-MobileMe address, such as support for something you registered using it or a server such as iTunes, will need to continue using it.

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

How can I share the home folder with different accounts on the same mac?

Hi, here's a question:
How can I share the home folder with different accounts on the same mac?
The whole point being not to have to install all my apps, and move all my files each time between users.
The second thing would be to be able to modify one document on one account, and have it changed on the other account without having to copy it.
I would like to have a pro and a private account on my mac.
Thanks for you answers,
Doug

Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

How can I replace the cursor in the below query?

I have this below query which calls a stored procedure that takes only 1 item's attributes at a time. But because of performance problems we are
required to remove the cursor. How can I replace the below cursor logic with set operations or CTE? Please advice.
DECLARE db_cursor_ava CURSOR
FOR
SELECT t.[agent-id],
t.[start-date],
t.[end-date],
t.[monitor-days],
t.[monitor-start],
t.[monitor-end],
t.[timezone-offset]
FROM @tmpAgentPeriodTimeRange t
OPEN db_cursor_ava
FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
@stDateTime_ava,
@endDateTime_ava,
@monDays_ava,
@monSt_ava,
@monEnd_ava,
@offset_ava
WHILE @@FETCH_STATUS = 0
BEGIN
DELETE
FROM @tmpMonitorPeriod
DELETE
FROM @tmpFinalResult
SET @runID = 1
IF(@endDateTime_ava>DATEADD(MI,@offset_ava, GETUTCDATE()))
BEGIN
SET @endDateTime_ava=DATEADD(MI,@offset_ava, GETUTCDATE())
END
INSERT INTO @tmpMonitorPeriod
EXEC core.usp_GetMonitoringPeriod
@startDate = @stDateTime_ava,
@endDate = @endDateTime_ava,
@monitoringDays = @monDays_ava,
@monitoringStart = @monSt_ava,
@monitoringEnd = @monEnd_ava
SELECT @maxID = MAX(tm.id)
FROM @tmpMonitorPeriod tm
FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
@stDateTime_ava,
@endDateTime_ava,
@monDays_ava,
@monSt_ava,
@monEnd_ava,
@offset_ava
END
CLOSE db_cursor_ava
DEALLOCATE db_cursor_ava
mayooran99

You've been down this path before - and the response is exactly the same.
how to replace cursor logic
And I'll suggest that you post the entire code - since you repeatedly delete 2 table variables but only populate one. The setting of @maxID also seems to have no purpose. And perhaps the issue here isn't the cursor but the general approach. Who knows
- but it appears you may have prematurely assumed that the cursor is the problem.

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

My Webpage screen is always minimized. How can I enlarge the window?

My Webpage window is smaller then my screen the window is at about 10 inches instead of the whole scren . How can I enlarge the window (webpage) ? it is so annoying to work with this screen.
Any help would be greatly apperciated.
Thank you

The first place to start may be to check Activity Monitor. Look at the Disk Usage tab and the CPU tab and see if any one or two things seem to be dominating that activity. Especially see if it's some 3rd party app or background process.

Can I replace the VM included with JD2 with 1 more current?

Can I replace the VM included with JD2 with 1 more current?
IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
the most current (1.2.2) JVM from sun? How? or where can i find
instructions?
d
null

Hi
You can use a different version of the JDK by following these
steps:
1. Tools | Default Project Properties (or Project | Properties
depending on your need).
2. Target JDK version: Click Define.
3. Click New. Browse for java.exe. The Class path and Source path
will auto-populate.
4. Click OK.
5. Select the new target JDK for any existing projects you wish
to use.
regards
Dave Wilbur (guest) wrote:
: Can I replace the VM included with JD2 with 1 more current?
: IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
: the most current (1.2.2) JVM from sun? How? or where can i
find
: instructions?
: d
null

How can I replace the window shadows with a simple border?

Similar Messages

Maybe you are looking for