How can I replicate this menu?

Sorry for the vague question title, but I'm simply trying to find how to replicate the on this BC site: http://www.de-air.com.au/
I'm fairly new to BC, so the more info, the better. I assume I just need to add some CSS to my menu and add the appropriate script. But I have no idea how to put this together.
Many thanks, warren

Yep you can. CSS HTML Only menu option, Menu Module V2, CSS and a bit of javascript or CSS3 for the animation.

Similar Messages

How can i replicate this images drop shadow exactly

How can i replicate this images drop shadow exactly from scratch
http://i52.tinypic.com/2u41t7n.jpg
If this sort of thing is not covered on this forum please direct me to an off site forum that would help me with this graphics question

Trial and error, putting both the reference image and your new experimental image up side by side, is the only way I know. I'd probably use the Info panel as well, to see that I'm getting the same or very similar color numbers from the new drop shadow.
You can probably use the Magic Wand set to a very low tolerance value to select and copy the light colored object, then make a new document with a white background, paste in the copied object, then start experimenting with drop shadow. Alternatively you could just redraw a portion of it.
-Noel

How can I replicate this analog TV warping effect on text?

I've tried using the puppet warp, but creating additional points seems to give the curves unnatural "kinks" that don't match up with the effect I'm trying to achieve.
I'm also seeing a sort of duplicating effect that's happening, with a second "blackout" that's kind of emerging from the top, but I'm less worried about that. Just wondering how to get this kind of warping. Can anyone help?

It's doable, but needs a bit of user input.
Stretching the text without blocking up the cross-bars at the top and bottom is the first problem, but you can get round that with Content Aware Scale.
Lay down the text and Rasterize.
Drag rectangular selections across the bottom and top of the text and save the selection. (I should probably dragged a third selection round the 'B' cross-bar.)
Select all > Content Aware Scale > Protect in the Options bar, and choose the selection you saved. Stretch the text.
Now just distort with Liquify adjusting brush size and pressure to suit. (I did try other options, but Liquify was the only one that did not soften the edges.
Fairly close to your original I'd say.

Every single website, or link within a website page is being added to my location bar/address bar drop down menu. How can I stop this? This just started happening.

Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
How can I stop this? This just started happening.
I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
Firefox 3.0.17
Windows XP
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17

A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.

My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

I want to name individual photos in the album but I am unable to select view sort in the drop down menu How can I overcome this?

I want to name individual photos in the album but I am unable to select view>sort in the drop down menu How can I overcome this?

Great to hear, but what was the solution?

HT4623 In syncing my Iphone 5 for the first time, Facetime disappeared. Although it shows up under apps in the settings menu, the application itself does not seem to be there. What happened? How can I fix this?

In syncing my Iphone 5 for the first time, Facetime disappeared. Although it shows up under apps in the settings menu, the application itself does not seem to be there. What happened? How can I fix this?

There has never been a facetime app on the iphone.
As the manual says, you access from contacts. Pick a contact and scroll down to the facetime button

Something is gone in Indesign menu. I dont know why, but the «textwrap» is gone and «stroke». How can I fix this?

Something is gone in Indesign menu. I dont know why, but the «textwrap» is gone and «stroke». How can I fix this?

When you switch active Extension Set or enable/disable extension(s), Extension Manager will create/update PluginConfig.txt. InDesign will read this file at launch to determine which extensions (plug-ins) should be loaded or not. If this file doesn't exist, InDesign will load all extensions. Also complicated dependency relationship exists among extensions. I am not sure how these extensions ran into incorrect state.
If sometime you have to use Extension Manager, you have to reset the state BEFORE launch it. Otherwise Extension Manager will recreate this file based on incorrect database records and file state.
1. Delete "Macintosh HD/Library/Application Support/Adobe/Extension Manager CS6/Configuration/DB/ExMan.db".
2. Delete all files in "Macintosh HD/Library/Application Support/Adobe/Extension Manager CS6/EM Store/InDesign CS6"
3. Delete all files in "Macintosh HD/Library/Application Support/Adobe/Extension Manager CS6/Mxi Flag/InDesign CS6"
4. Move all files in "Macintosh HD/Library/Application Support/Adobe/InDesign/Version 8.0/nb_NO/Extensions/REMOVED" to the parent folder "Macintosh HD/Library/Application Support/Adobe/InDesign/Version 8.0/nb_NO/Extensions".

NORTON 360 IDENTITY SAFE MENU DOESN'T APPEAR. HOW CAN I FIX THIS?

None of the features of Norton 360 Identity Safe seem to work after I upgraded to Firefox 4.0. How can I fix this, or do I have to go back to the previous version of FF?

Symantec have made an update for their add-ons to work in Firefox 4, but they only listed them as compatible with Firefox 4.0, they need to update them to let them work in Firefox 4.0.1. They have indicated this will be very soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808

My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?

Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I have iTunes open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice.

I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.

Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again.

When i want to return to my home page I click on the home icon and it resets the page to my home page but also open a blak tab which i don't want how can I stop this as i have too many tabs open.

When I want to return to my home page after looking at a website I click on the home icon and it resets the page to my home page but also open a blak tab which i don't want.How can I stop this as I have too many tabs open and have to close all of them.

You may have an unwanted extension that is modifying sites (or the toolbar area). Try this:
Disable ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that flush the tab?
Please report back on anything suspicious you find so others can learn about its bad behavior.

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

"You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
Mac 101: Time Machine

How can I replicate this menu?

Similar Messages

Maybe you are looking for