How can I reply to only 1 person rather than the whole group

On my iPhone 5 how do I change the settings so that when I am part of a group that receives a message I can reply to only the sender without the other recipients seeing my reply?

There is no settings for that. YOu would have to create a new message to that sender.

Similar Messages

How do you shufle play a playlist rather than the whole library?

iPod newby, sorry, but is there a way?

If you turn on "Shuffle: Songs" in Settings, then start playing a playlist on the iPod, it will be shuffled.
Beavis2084

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

How can I use "t3://becluster:6001" rather than "t3://dcsv02,dcsv01:6001"

          I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic server
          5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          I try to make a t3 connection between the PC and the cluster of machines.
          On the Windows PC I have the following configuration for the
          "c:\windows\system32\drivers\etc\Hosts" :
          171.1.70.61     becluster
          171.1.70.62     becluster
          where
          "171.1.70.61 is dcsv01 and
          171.1.70.62 is dcsv02 "
          If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          I have a great failover mechanism : if any of the machine (dcsv01 or dcsv02) are
          down the requests are routed to the other one.
          BUT!! If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          I have a not great failover mechanism :
          say that my windows hosts file looks like :
          171.1.70.61(dcsv01)     becluster
          171.1.70.62(dcsv02)     becluster
          then if dcsv02 is down then all requests are routed to dcsv01 and that is fine.
          BUT!! if dcsv01 is down then I got on my PC the
          "Bootstrap unable to get a t3 connection to dcsv01" exception and failover does
          not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          So how can I use
          "t3://beclsuter:6001" rather than
          "t3://dcsv01, dcsv02:6001" with the same failover service????
          Thanks


          Thanks mike,
          In a UNIX or windows environment how can I get a DNS server that round robin?
          "Michael Reiche" <[email protected]> wrote:
          >You need to have becluster defined in a DNS that round-robins.
          >
          >Mike
          >
          >"Martial" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic
          >server
          >> 5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          >>
          >> I try to make a t3 connection between the PC and the cluster of machines.
          >>
          >> On the Windows PC I have the following configuration for the
          >> "c:\windows\system32\drivers\etc\Hosts" :
          >> 171.1.70.61 becluster
          >> 171.1.70.62 becluster
          >> where
          >> "171.1.70.61 is dcsv01 and
          >> 171.1.70.62 is dcsv02 "
          >>
          >> If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          >> I have a great failover mechanism : if any of the machine (dcsv01 or
          >dcsv02) are
          >> down the requests are routed to the other one.
          >>
          >> BUT!! If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          >> I have a not great failover mechanism :
          >> say that my windows hosts file looks like :
          >> ..
          >> 171.1.70.61(dcsv01) becluster
          >> 171.1.70.62(dcsv02) becluster
          >> ..
          >> then if dcsv02 is down then all requests are routed to dcsv01 and that
          >is
          >fine.
          >> BUT!! if dcsv01 is down then I got on my PC the
          >> "Bootstrap unable to get a t3 connection to dcsv01" exception and failover
          >does
          >> not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          >> So how can I use
          >> "t3://beclsuter:6001" rather than
          >> "t3://dcsv01, dcsv02:6001" with the same failover service????
          >>
          >> Thanks
          >>
          >>
          >>
          >
          >

When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

Edit > Attachments > Insert Attachments at End of Message. If a new message is the active window, the option applies only to that message. If you don't have a new message open, then the option becomes Always Insert Attachments at End of Message.

HT201976 With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

HT201976 With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

Sharing certain groups in address book rather than the whole address book

Hi
I haven't got server yet in our office but we are looking to do this. Currently we just share calendars and other bits and pieces but I'm looking to get server in place. Sharing the address book requires giving a user our iCloud password and letting them look at the address book as a whole. We really only want to share certain phone numbers like our company staff phone numbers rather than our financial clients and other sensitive contacts.
Is it possible to only allow a "user" to access certain, or 1 group in address book rather than the whole address book library itself by using osx server
Many thanks

Hi Jaime,
I just wanted to jump in here with a quick question... on Mac OS X Server my understanding was that with the open directory, you can't designate organizational groups for the ldap service. Without that ability, how are you limiting what ldap users can see?
In our setup, our LDAP settings would be similar to
cn=users,dc=example,dc=com
What format would you use to say show only members of the group "examplegroup"?
Thanks!

How can I file at last location rather than location of current file?

I have Abobe Reader X. In the old Adobe, when I saved a file, it took me to the last folder I was in, not the location of the current file. Thus far, I have not been able to find out how to get Adobe Reader X to do this. I even asked work help desk for help and their solution to unclick 'Automatically save document changes to temp file' worked once.
Is it possible? This is what I want.
Example:
I open file that is saved at Y:Scanned Files and save it at
X:Dogs/Breeds/Hounds/Sighthounds/Basenjis. I open the next file that is at Y:Scanned Files and click on File:Save As/PDF and window opens to save at Y:Scanned Files rather than at X:Dogs/Breeds/Hounds/Sighthounds/Basenjis, where I just was. I want to save file at X:Dogs/Breeds/Hounds/Sighthounds/Afghans so instead of just one click, I now have to go through six. Now imagine you have 30 or 40 documents you have to save. That's minimum 180 clicks versus 30. A big difference. And if you multiply it further by daily and weekly, it's a lot.
How can I get Adobe Reader X to open the 'save as' window at the last location rather than the current file's address? I also have Adobe Acrobat, but can't figure out how to get it work in that either.
I do not like Adobe Reader X. Unfortunately, it got downloaded automatically at work.
Another complaint I have is when I have Adobe Acrobat open and I click on a pdf to open, rather than open in Adobe Acrobat, it opens in Adobe Reader X (which was not the case with the previous Reader). If I want to open a doc in Acrobat, I have to go to Acrobat and File/Open, which is a pain.
Another complaint is, why do you have 'save as' and then 'pdf' or 'text'? This is another time consuming click I have to make. Add it to the 180 I'm already making above and you can see why I'm extremely unhappy and frustated with this version of Adobe.
Please let me know if the above is feasible or not and if it is, how to do it. If it isn't feasible, please make the above adjustments to Reader Y and put it out pronto. Thank you.

If you would like to contact one of the UK based BT Care Team who moderate this forum, they may be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I attach a file in mail and the whole thing shows there ie. attach a PDF and the whole pdf content is displayed in the mail. Anyone know how I just get the icon toi appear as the attachment rather than the whole file? This only happens with pdf and jpg

Hi Folks,
When I attach a jpg or pdf to a mail it shows as the whole document "pasted" into the mail. Anyone know how I get the file to just show as an icon and not as a mass of pasted in docs?
Thanks,
Pedro

For your own viewing, you can of course control-click on the attachment and select "View as Icon".
For others' viewing, it depends upon their email reader. To ensure that attachments are not displayed expicitly you can put them all in a zip file (via control click and "Compress") then attaching them, or you can use third party stuff like Attachment Tamer.
charlie

How can I set up only bookmarks icons on the side bar in Fx 10?

Hello everyone,
I'm new to Fx extensions, so please provide the solution for the following problem I have:
I want to have my bookmarks tab on the left side, that will be showing only the icons of my fav pages. Is it possible to do with any of the Fx 10 extensions?
Thanks for your help.
Michal.

You can hide the search bar, but the only way to hide the names that I can find is to set the text color to transparent.
Adding (leaf) will still show folder names.
Add code to userChrome.css below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#bookmarksPanel #sidebar-search-container { display:none!important; }
#bookmarksPanel treechildren::-moz-tree-cell-text(leaf) { color:transparent!important; }</nowiki></pre>

How can I sent photos as attachment rather than embedded in the email?

For work, I need to send photos to my editor via email. In Mail, the jpgs automatically become embedded in the body of the the email, but my editor would prefer to receive them as attachments. Is there any way to send photos as attachments in Mail, rather than embedded email itself?

LaSylphide, the Mail forum shows up as one of the categories within the "Mac OS and System Software" forum. Click on whichever version of OSX you're using, and you'll see the list of categories.
There are several threads on this topic, and I've seen three solutions:
1. Check the "Send Windows-Friendly Attachments" box. Some people say it works, some say it doesn't.
2. Open Terminal and type:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
Some people say this works, some say it doesn't.
3. In Mail > Preferences > Composing, make sure "Message Format" is set to "Plain Text." Once again, some say this works, some say it doesn't.
Hopefully, one of those will solve your problem. There may also be a setting in your editor's email program that would solve it, but I'm assuming that's a Windows app and I haven't worked with Windows since 1993, so I'm no help there.

How can copied calculations be made relative rather than absolute?

Frequently I like to copy a recurring item from a previous entry, change the date and assume all will be well. But Numbers 3.2.2 also copies the calculations as absolute rather than relative. That is a calculation of previous balance plus a credit minus a debit is referencing the copied balance, credit and debits rather the balance, credit and debits in the new location, thus throwing the calculations off.
Supplementary question:
Is there a fast way to correct the wrong calculations once made? A fast way to restore an orderly sequence one row referencing the previous row's balance and the current row's credits and debits?

Hi Wanapitei
Have you tried this?
Click on a "lozenge" (A2 in this example) to see the contextual menu.
Clicking on Preserve Row or Preserve Column will turn on (or turn off) the $ sign in the formula. That toggles between Absolute and Relative references.
Regards,
Ian.

How can I insert into a table other than the default table in a form

Hi,
I want to insert into a table with some fields value of a form of another table. I have written insert code On successful submission of that form, but after submit it gives the following error
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
My code is like this
declare
l_trn_id number;
l_provider_role varchar2(3);
l_provider_id varchar2(10);
begin
l_trn_id := p_session.get_value_as_number(p_block_name=>'DEFAULT',p_attribute_name=>'A_TRANSACTION_ID');
l_provider_id := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER1');
l_PROVIDER_ROLE := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER_ROLE1');
if (l_provider_role is not null) and (l_provider_id is not null) then
insert into service_provider_trans_records(service_provider_id,transaction_id,role_type_id)
values(l_provider_id, l_trn_id, l_provider_role);
commit;
end if;
end;
Where 'PROVIDER1' and 'PROVIDER_ROLE1' are not table fields.
How can do that or why this error comes ? Any idea?
Thanks
Sumita

Hi,
When do you get this error? Is it while running or while creating the form.
Here is a sample code which inserts a non-database column dummy into a table called dummy. This is done in successful procedure.
declare
l_dummy varchar2(1000);
begin
l_dummy := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',
p_attribute_name=>'A_DUMMY');
insert into sjayaram903_1g.dummy values(l_dummy);commit;
end;
Please check in your case if the size of the local variable is enough to hold the values being returned.
Thanks,
Sharmila

How can I have a topic name different than the filename of a linked Word document?

I've encountered multiple issues with linking to Word files ...here's another one: If a Word document is entitled Feature_ABC, then upon generating the HTM after linking it, the HTM's filename and topic name are both Feature_ABC. As underscores are ugly in topic names and features can be renamed, I would hope that I could rename the topic to be different than the filename.
The Help documentation suggests this is possible by editing the Topic Name Pattern in the Word Conversion Settings dialog of Project Settings. However, reagardless of the Pattern entered, every time I generate or update from the context menu of a linked Word document the topic name remains the same as the filename.
Because the topic name is shown in the Search panel and browser tabs, it will be a little ugly and may even be confusing. It is possible to edit the HTML directly, but then the HTML is overwritten each time the Word documents are update and the great advantage of using linked documents is lost.
Is there a way to solve this problem?
Thanks in advance for any help you might be able to provide.

Thank you for your quick reply - just checked Multifox out.
It seems it still forces me to open a new window, while preventing the need for a new profile.
Why isn't it in the addons.mozilla.org ? Looks dangerous ...

How can I reply to only 1 person rather than the whole group

Similar Messages

Maybe you are looking for