How can I resend an IPhoto e-mail with the wrong address?

How can I resend an IPhoto e-mail that was returned because of an error I made in the address?

ImagineThat:
Welcome to the Apple Discussions. There is a 3rd party application, pdf-RecoverPro, that will let you lock the file to printing, changing, etc. You set two passwords, one to let the user view it and one to unlock the restricted features. Just provide the first password and send the file. You can try the demo version. It just saves one page in demo mode.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

How can we handle browser settings while dealing with the security ?

Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?

Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM

I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

You will have to call Apple and speak to someone in account security.

I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

I am trying to connect my fathers ipod touch to itunes on my computer, how can i sync itunes on my machine with the ipod such that his songs don't get deleted and i could add new songs to it (mp3 on my computer)

You cannot merge accounts. Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37
One computer using multiple iTunes Store authorizations - http://support.apple.com/kb/HT1206

HT4743 I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3). How can a show I purchased be incompatible with the latest version of iTunes?

I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3).
How can a show I purchased be incompatible with the latest version of iTunes?
I want a refund, but I can't even figure out how to request one through support. Super frustrated and long time Apple customer.

After a day of trying, both iTunes and my Apple TV are telling me that the episodes of Scooby Doo I purchased are incompatible due to QuickTime. I still don't understand how I purchased something from iTunes that doesn't work with iTunes.
the exact error I receive when I try to play an episode is the following:
"This movie requires QuickTime, which is not supported by this version of iTunes."
Any advice would be great!

How can i open my iphone 4s activation with a wrong owners account?

how can i open my iphone 4s activation with a wrong owners account? it appears that my iphone 4s has been changed the owners account name and also reported stolen. please help. thanks!
Ron Ban

You cannot. Get a refund if you cannot locate the previous legitimate owner.
Find My iPhone Activation Lock - Apple Support

HT3775 How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

Try using VLC or installing both QuickTime 7 and Perian. Nothing will work with all AVIs; some of them require codecs not available for Mac OS X.
(105507)

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

How can I get my document to save with the rotated view last used?

How can I get my document to save with the rotated view last used?

Possible with Adobe Acrobat, not Adobe Reader.

I'm trying to reset my apple ID password but forgot my security questions. Apple are sending the confirmation e-mail to the wrong address, please help?

I'm trying to reset my apple ID password but forgot my security questions. Apple are sending the confirmation e-mail to the wrong address, please help?

Hello AndrewsAFCx,
Thank you for using Apple Support Communities!
If you cannot remember your security questions for your Apple ID, I would recommend these steps outlined in the article named:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
All the best,
Sterling

How can I select to answer a mail with or without the message

Hello
When a mail is received and then opened, I have the options to answer to the sender or to all. In the account preferences, I can specify if the original message is copied or not. This option applies to ALL the answers. How can I choose when editing a mail if I want the message to be copied or not ?
Kind regards
JP

This is the easiest method I have found that will resolve your issue.
'Tools' > 'Account Settings' > 'Composition & Addressing' for the maill account
or
'menu icon' > 'Options' > 'Account Settings' > 'Composition & Addressing' for the mail account.
deselect / do not select 'Automatically quote the original message when replying'.
Click on OK to save changes.
To send a 'Reply' with no original message, simply click on 'Reply' button.
To send a 'Reply' with all or part of original message.
Highlight the section of the message or all of the message and then click on 'Reply' button

How can i look up my apple id without the email address associated with it

I do not know the email address associated with my apple id. How can i look up my apple id with out it

You need an non-Apple email address to set up an Apple ID.
Yuu can get a Gmail account heee. It is free
https://support.google.com/mail/answer/56256?hl=en

How do I install a new Exchange account with the same address as my old Exchange account and have my bcc mail not go to the old account?

I have an iPhone 5s running iOS8 and an iPad, up to date. I have recently changed my mail server but not my email address. My "old" mail account is an Exchange account and I have also set up a "new" Exchange account with the same address but with the new mail server details. When I receive outside, third party emails they are routed correctly to the "new" Exchange account but when I bcc myself or receive other emails from any account with my domain name the emails are routed to my "old" Exchange account. I have changed the default account settings to the "new" Exchange account. Also, if I send myself an email from my laptop, through the new mail service provider, it is routed correctly on my laptop but incorrectly on my iPhone and iPad. It appears as though the Apple products have cached my email address and routing and won't look to pick up the new mail server details. I don't see anything in the mail account settings or contacts that allows me to refresh or clear the cache. The result is I now have mail in 2 accounts. If I can get the misdirected mail from the odl account to the new one I will then make the old account inactive. Anyone have any ideas on this one?
Thanks in advance for your time and ideas,
DAA

Can you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
(1012)

Iphoto says I have the wrong address and won't let me order the book. What is the problem?

Why doesn't iphoto let me order the book I composed? They say I have the wrong address yet it is my address.

What Print Products Store do you have iPhoto linked to in iPhoto's Advanced preference pane?
Is it the correct one for where you address is?
OT

How can I share an iPhoto-created pdf on the web or via email???

I design photobooks for clients in iPhoto and often use the Print feature to save a book file as a pdf that I can easily review as a final pass. Once or twice I've burned a book draft pdf to a CD and send it to a client for preliminary viewing, comment, and further development requests. That's slow, clunky, and expensive compared to being able to either posting the pdf somewhere on the web that my client can access or email them the pdf (which is usually much bigger than my Mac mail account permits).
Can anyone tell me how I can turn my iPhoto books into a view-only file that I can easily share online with my clients? I'm also about to create a marketing web site for my little design studio and I think understanding this better will help me figure out how to post selected excerpts from the variety of iPhoto (and also Bookmaker) books I've designed and produced over the past year or so.
thanks in advance for any help and ideas you can offer!
G4 laptop Mac OS X (10.4.7)

ImagineThat:
Welcome to the Apple Discussions. There is a 3rd party application, pdf-RecoverPro, that will let you lock the file to printing, changing, etc. You set two passwords, one to let the user view it and one to unlock the restricted features. Just provide the first password and send the file. You can try the demo version. It just saves one page in demo mode.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can I resend an IPhoto e-mail with the wrong address?

Similar Messages

Maybe you are looking for