How can I reset my Photosmart C4480 to factory default? It stops halfway into printing the page.

My Photosmart C4480 printer only prints a couple of paragraphs and stop. I go to my iMAC's Preferences, open print and Fax and click "resume." It prints a couple of lines and stops again. I have entered the CD and reinstalled the printer, to no avail. Any way to reset the printer to factory default?

Before you reset the hardware, are you able to successfully make a copy from the glass?
If you can, this printer is NOT having a hardware issue, if it can't then I will look up the reset.
Trained on Mac and Windows for inkjet printers.
**Although I work for HP, I do not represent them in these forums**
If I've resolved your issue please mark as Accepted Solution so others can use my advice! ^.^

Similar Messages

How can i reset my disabled iphone to factory setting without itunes?

how can i reset my disabled iphone to factory setting without itunes?

When you made the backup, you may have told it to encrypt the backup so that you can recover iPhone to factory settings successfully.
http://support.apple.com/kb/HT1414
Therefore I used the normal iTunes backup and restore found under the Summary tab in iTunes. If your data is still on the other phone, back it up again with iTunes. To use iTunes you have to start it, connect your phone to the computer with a cable, then select the iPhone button near the top right corner of the screen. Be sure not to check the encrypt button.

HT201269 HOW CAN I RESET MY IPHONE 4S TO FACTORY SETTINGS WITHOUT WIFI

how can i reset my iphone 4s to factory settings when i cannot connect to wifi

Hi thebrownlies,
Thanks for using Apple Support Communities. This article has instructions for restoring your iOS device to factory settings using iTunes:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Cheers,
- Ari

Firefox won't open on start screen or otherwise. How can I reset or fix otherwise if I cannot open firefox to get to the controls?

running windows xp Firefox worked yesterday , I have not made any changes now it will not open at all. All of the troubleshooting requires me to be in firefox , if I cannot open how can I reset or do anything?

Firefox doesn't give any error message, it just stalls or never shows up?
If you haven't already, could you check the tips in this article: [[Firefox won't start - find solutions]].
If you want to try starting Firefox in its Safe Mode, you can hold down the Shift key while double-clicking the Firefox icon. You should get a small dialog with the choices of Safe Mode and Reset. I suggest trying Safe Mode first.

How can i reset my ipad to original factory settings?

I have an ipad 1. How do I reset it to original settings so that I can give it to a friend?

See Erase your device Here > http://support.apple.com/kb/HT4137
Go to Settings > General > Reset > Erase all content and settings
Also... See the wjosten post here...
https://discussions.apple.com/message/20294697

How do I reset an iPad 2 to factory defaults when I can't recall the Restriction passcode?

I have tried all of the suggested reset methods and still cannot reset to factory defaults. Somehow I setup a restrictions passcode that I can't find or remember so I seem to bee stuck.
Does anyone have a solution?

The only option is to wipe the device clean and restore it to factory settings.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

HT1766 how can I reset my iphone 5 to factory setting? using iTunes?

i need to reset my iphone 5 to factory setting. how can I do it using itunes?

jrs1008 wrote:
i need to reset my iphone 5 to factory setting. how can I do it using itunes?
Is there a special reason to do it with iTunes? You can do it on the phone by going to Settings/General/Reset - Erase all content and settings.
To do it using iTunes connect the phone to your computer using a USB port directly on the computer, not a USB hub. Click on its name in iTunes, then click Restore iPhone. When the Restore finishes choose to set up as a new device.
Note that for either method you will have to disable Find my iPhone first, either in Settings/icloud on the phone or by logging in to https://icloud.com/find.

TS4000 How can I reset Reminders on macbook air to default settings ?

I need to reset the Reminders app to default setting just as if I had freshly installed it....how can I do this ?
Help anyone ?
Thank you !!!

Ok, in this case your iMac will be performing as an application server. As such, it will need to be "reachable" from the Internet. This is typically done in one of two ways: 1) It is assigned a static Public IP address, or 2) It is assigned a static Private IP address.
In the first method, your iMac will be like any other publically available server (Web, E-Mail, etc.) To accomplish this, you would need for your ISP to provide you with a static Public IP. You can then configure the AirPort Extreme to allow remote clients to access this server by creating a DMZ for the server. This would fully expose your iMac to the Internet.
In the second method, you would assign the iMac a static Private IP address that is just outside of the default range of the AirPort's DHCP service. You would then configure the AirPort for port mapping. Which ports that will be needed to be mapped will depend on what your application's support tells you.

HP Elitebook 8460W - how do I reset speakers and microphone to factory defaults?

I did something (can't remember what) as I was trying to get a better recording of a class; and now I get feedback / echo from the speakers and the microphone doesn't work unless I use a head set...

The only option is to wipe the device clean and restore it to factory settings.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

How can i reset all bean properties to their default state.

I have a bean which i am using to store data throughout a users session until the data is extracted from the bean and put into the database at the last stage. What i would like to know is how i can reset all of my bean properties? I understand that i could go through each String property and sets its value to "" or null but there must bea an easier way. does anyone have any idea how to do this?
Suggestions would be much appreciated.
Thanks

You can implement your own reset option (one methode that goes though and manually sets everything back to its original state) or you can dispose of the bean and create a new one.

How can I reset my Apple ID security questions when it's not giving me the option to?

Can someone please help me to figure out how to reset my questions!?!

You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(91633)

How can I reset my ipod touch. It's stuck on a screen with the itunes logo

Can someone please help me? I need to reset my ipod & by holding the wake button & the home button its not helping. It got like this after I tried to update the software.

I have the same problem right now only on my Iphone. I can't get anything on my phone but that picture. I have tried to turn it off and on and nothing works. I called support and they said let the phone run down and then turn it back on. That is all I can think of to do and it will take several hours to get it to run down.

How can I reset my MacBook Air to factory settings that will delete all 3rd party apps and wont delete my data and iLife apps?, How can I reset my MacBook Air to factory settings that will delete all 3rd party apps and wont delete my data and iLife apps?

I gave my MacBook Air to a person to use for a while, and now I got it back. I want it to be good as new before I start using it properly. Its okay if I lose data but I dont want to lose the Apps that were onboard. I want to start all over again.
Thanks

Assuming you don't have a Time Machine backup before you lent your MacBook out, then you've a few choices.
If you want to set it back to the day you got it, then if it's Snow Leopard, use the micro USB stick that came with your Mac and after boot from it ( hold the Option key on startup) select the USB stick and when booted from it, go to Disk Utility and reformat the HD then install SL. when it's done and started in 10.6, select the install Applications from the USB stick, then your back with iLife apps etc.
If Lion, restart from the Recovery Partition as per the instructions above except you don't need anything plugged into the Mac, select Recovery and again DU erase and install Lion. once Lion is installed the iLife apps will be available to download from the App store as your MacBook will be recognised as coming with these apps.
WARNING, both these methods remove ALL user data

How can I Reset my MacBook Pro to factory settings

I have Yosemite. its a 2014 MackBook Pro. I need to erase it to send it back. Im switching from the 15" to the 13".

Click here and follow the instructions.
(118119)

How can i make a APIC to a factory default ?

In case fabric domain name mismatch, the mismatched APIC under a APIC cluster can be handled by console and GUI.
I've checked a lot of documents regarding APIC troubleshooting but i couldn't find it.
I think i have to do initial setup to put it on APIC cluster.
Could you tell me What i should do?

Try this:
Resetting APIC 'admin' password
1- Connect USB to the APIC. The USB is to contains single dummy file named 'aci-admin-passwd-reset'
2- Reboot the APIC
3- Interrupt the reboot when the prompt is shown "Press any key to enter the menu"
4- The next screen will show version of Linux installed on the APIC
5- Select the correct version
6- Type 'e' to edit this command
7- Add "aci-admin-password-reset' to the end of the command and press enter
8- Press 'b' to boot.
9- the APIC will boot to a prompt and ask for the new 'admin' password
Let us know how it goes

How can I reset my Photosmart C4480 to factory default? It stops halfway into printing the page.

Similar Messages

Maybe you are looking for