How can i reset my restriction passcode for reset all settings

I forget the passcode and i want to reset all settings.can some help me how to reset all phone.

iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

Similar Messages

  • How can I change a restrictions passcode without losing all the restricted settings?

    We have two iPads for two boys... both are heavily restricted.  One of my boys saw the passcode and I changed it by disabling and then re-enabling restrictions, only to be shocked when ALL MY SETTINGS were reverted to default and DIDNT come back after enabling restrictions again.  How can I change the passcode on the other iPad without losing all the settings, especially the long list of blocked websites?
    Thanks in advance.

    What good would the passcode be if you could bypass it like that?

  • HT1414 how can I remove the restriction passcode without having to reset device

    how can I remove the restriction passcode without having to reset device

    Put in the restrictions passcode, and then Disable Restrictions.
    Otherwise, you can't.  That's the ENTIRE purpose of a passcode lock.

  • HT201274 how can i retrieve my restrictions passcode?  i cannot unlock my phone if cannot log-in my restrictions passcode

    how can i retrieve my "restrictions passcode"?  i cannot proceed to unlock my iphone 4 if cannot supply the restrictions code.
    thanks!

    You can not do so. If you can't remember it, you will need to put the phone in DFU mode (google for instructions) and restore it as a new device. Do not restore your backup. The backup contains the restriction settings.

  • How can i retrieve my restrictions passcodes on my 3 apple devices without have to restore them to the factory settings?

    I have 3 apple devices  an IPad Air/ iPhone5 and iphone4s they all currently running the IOS 8.3 and my question is:
    How can I retrieve the restrictions passcodes in all of them without have to restore them all back to the factory settings ?
    I have all the backups in my Icloud , but if I do that they all will come back to the same settings I have now which includes the same passcodes I don't remember. I had all my passwords and passcodes saved before, but I cant find them.
    looking forward to hear from one of you out there...
    Thank you!

    There's no way around restoring the device as new if you cannot remember your restrictions password.  If there were, it would make having a restriction password useless.

  • How to recover or reset my restriction passcode for ipad mini

    iforget my restriction passcode.. so how to reset my ipad tell me

    Remove restriction passcode
    1. Restore to Factory Default
    http://support.apple.com/kb/HT1414
    2. You can restore from a backup that was done before you enable the Restriction Code.

  • How will i retrieve forgotten Restriction passcode for iphone 4

    Help! Been trying to recall my restriction passcode in iphone 4& ipad 2 (ios5) and couldnt retrieve it. Had 15 attempst ans still failed it. Any way i can restore in? Pls. Thanks.

    You'll have to restore the iPhone to its factory default settings. Connect it to your computer, open iTunes, select your iPhone from Devices list, click Restore. Everything on your iPhone will be erased. Anything in iTunes can be synced back over once the restore is done.

  • How can I find my restriction passcode?

    I need help to get my restriction passcode

    Only you and your iPhone know it.  There's no way to "get it" except to remember.  If you can't remember, you'll have to restore as new, i.e. without your backup.

  • How to reset the restriction passport for resting iphone in ios7

    Hi, folks please help me to reset my forgoten restriction passcod for resetting my iphone

    Resetting all your settings..
    settings< general< reset> reset all settings..  but you may need to know your restriction passcode. and the only thing that you can do to by pass that is to  restore the device as new.
    you can not restore from a back up .. because it will bring your restriction passcode with it..
    just  upload your pictures to the computer. and  merger your contacts calendars and other things to icloud .

  • Resetting the restrictions passcode

    Is there any way to reset the restrictions passcode without resetting the entire device?

    You will get the restrictions passcode back if you restore to your backup - as you say that the backup was made when the restrictions code was in place it therefore contains it.
    To reset back to factory defaults, connect the iPad to your computer, select it on the left-hand side of your computer's iTunes, and on the Summary tab on the right-hand side click the 'Restore' button

  • HT201304 I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

    I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How do I reset an iPad 2 to factory defaults when I can't recall the Restriction passcode?

    I have tried all of the suggested reset methods and still cannot reset to factory defaults. Somehow I setup a restrictions passcode that I can't find or remember so I seem to bee stuck.
    Does anyone have a solution?

    The only option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • I forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    i forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    Try and force the iPad Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • How many times can you attempt the restrictions passcode?

    I've forgotten the restrictions passcode I set on my iPod. Since I don't want to perform a complete systems reset just yet, I want to try to attempt remembering my passcode... how many times can I try the restrictions passcode without permanently locking it?

    This is for the restrictions passcode correct? Not the regular passcode....
    And I heard somewhere that if you guess too many times, you will be permanently locked out of your device...

  • How do I reset the RESTRICTIONS Passcode on iPhone 4s

    My teenager got to this before I did!
    How do I reset the Restrictions Passcode on his iPhone?
    Will this even work to restrict web content?
    I could swear that I remember being able to do this via iTunes when the phone was plugged in, but that functionality doesnt seem to be there.
    I see that I can restrict adult material (songs, R movies and etc) on all phones on the account via iTunes, but I dont see how to customize every individual phone on the account with different restrictions...
    Help...
    thank you

    Is it not possible to have a reminder sent to the account holder (ie:me) to reset, like when a passord for anything thing else is forgotton?    Just dread wiping the whole thing and re-setting up...... 
    Also, do you know if it controls web access?  I seem to remember and itunes content and volume control on the last parental control I used on an iphone, but that was atleast a year ago on a 3GS.
    Thx again

Maybe you are looking for

  • Invoice verification

    How can we get a list of MM - invoice documents posted with a Price deviating from that of the PO price.

  • Uploading data from a particular column of a particular sheet from an excel file into internal table

    Hi, I have to upload data in the first coulmn of 7th sheet of an excel file. Can anyone please help me on this. This link works perfectly fine for excel files without Macros. Read multiple sheets of an Excel file into SAP through ABAP - Code Gallery

  • Problem in Lock entry

    I am using an transaction which do some 5 process and show the status of the process in a screen. When any one of the process stops in middle the object's (like material no. etc)which are locked are left locked. But i have to change that material usi

  • 201 Movement type

    Hi, while doing good issue via Mb1a we met the f"Fld selectn for mvmt type 201 / acct 417000 differs for Vendor goods movement (014) Regards, Renuga.A

  • Iphone 4s scanning for wifi but not finding

    I have iphone 4s My phone is not scanning for wifi its turn on but finding nothing, some time find my home network and after some time disappear again