How can I reset the CTI for each clip to 00:00?

I'm brand new to this - got Premier Elements 12 yesterday, so please bear with me.
I have clips from a soccer game, each of which starts with 00:00. I have written notes about key scenes in each clip using the time that scene occurs in each clip. But when I add clips to the timeline, each clip's CTI begins at the point where the last clip's left off. So, say I wanted to get to a scene in clip 2 at 0:44. But clip 1, with a duration of 4:30, precedes clip 2 in the timeline . To get to the scene I was looking for in clip 2, I'd have to add the 4:30 from clip 1 to the 0:44 in clip 2 to find my scene in the timeline at 5:14 . Obviously, the problem only gets worse with each additional clip. And near impossible when I trim clips.
One "workaround" I can use is to make a copy of the original clip in project assets, adjust the in and out points in the copy to get the scene I want, save/rename that scene and add it to the timeline instead of the original clip. Each scene would then be renamed and would show it's specific duration in the timeline. But that seems like a lot of work, to have to make copies of original clips in assets, trim them there and take them to the timeline. Back and forth, back and forth.
Is there a way to keep the start and end times of each original clip when I add it to the timeline, so I can isolate each scene in that clip and trim out the unwanted portions without having to do math or spend time making and trimming copies? To be more succinct, Can I reset the CTI at the start of each clip to 00:00 within the timeline?
I hope I've described my issue in a clear way that doesn't cause confusion. If not, please let me know what other questions you have or additional info you need to understand the issue I'm describing. Thanks, and sorry for the long post.

mascott2300
Please take a look at the blog post that I wrote about the gathering, assembling, organizing, and management of clips in a large project.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
See if any of the details work for you in your planned Premiere Elements projects.
Also, from the point of view of leaving informational notes in the program, consider the "Comments" opportunities of the unnumbered markers when you place unnumbered markers in the Timeline.
ATR Premiere Elements Troubleshooting: PE11: Forget Me Not Clip Details and Timeline Unnumbered Markers
Please do not hesitate to ask questions or to ask for clarification on anything written.
Thank you.
ATR

Similar Messages

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • How can I reset the settings for my Ipod Video on the Ipod source list.

    I accidentally choose the 3rd option (do not update video) on the Ipod option button >>> video <<< and for that reason I can't download or play video. How can I reset the setting in order for me to enable to update my Ipod for the videos manualy.
    I open itunes and select the Ipod in the source list, then click on the option button and click video. But from there, I can't select the options... please advice ASAP, Thanks...<br>
    Pentium iii   Windows XP   Desktop

    Read this and see if it helps:"Syncing videos to your iPod" http://docs.info.apple.com/article.html?artnum=302509

  • How can I reset the account for facetime on ipad?

    I put in the wrong address/Apple ID for the ipad Facetime and now need to reset that address.  How can I do that

    Reset Apple ID
    Apple ID FAQ's

  • How do I set the length of each clip?

    I have just begun trying to build a video with Premiere Elements 10
    I have created many videos with Windows Movie Maker..found it boring for Effects etc.that's why I have this new software.
    Now my question is ..How do I  set the time for each clip?
    I like to add a clip that goes with each lyric in the song.
    Thanks.

    Welcome to the forum.
    As Steve points out, that is "editing."
    One can use either of two Tools in PrE, to Trim the Clip to suit.
    First, one can Dbl-click on the Clip in the Project Panel to open it in the Source Monitor, which looks a bit like the Program Monitor, but it has the In & Out Point settings. When that Clip has been Trimmed, as needed in the Source Monitor, just drag it to the Timeline.
    Or, one can drag the Clip to the Timeline, and then click+drag on the Head of the Clip to set its In Point, and on the Tail, to set the Out Point.
    Good luck,
    Hunt

  • I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

    I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

    Hello nmssns,
    Thank you for contacting Apple Support Communities.
    You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
    About Apple ID security questions
    http://support.apple.com/kb/HT5665
    Regards,
    Jeff D.

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

    I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

    Visit this site: http://support.apple.com/kb/HT5312

  • How can i reset the for digit code?

    how can i reset the for digit code?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Cant remember my password for my mac air.. how can i reset the password?

    cant remember my password for my mac air.. how can i reset the password?

    Start it up from the software reinstall drive or Mac OS X DVD and use the reset password function. If needed, restart with the Option key held down.
    (59271)

  • How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

    How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
    I have seen this question asked previously and it seems there is no answer.
    I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
    ... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

    Press CTRL + 0
    Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
    You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    You can find more information about the zoom features Firefox offers in these articles:
    [[Text zoom]] - For zooming text only
    [[Page zoom]] - For zooming the whole page (including images etc.)

  • HT201441 i have an ipad and the original owner is not present and i have no way to contact them how can i reset the ipad back to factory settings?

    i have an ipad and the original owner is not present and i have no way to contact the owner how can i reset the ipad to factory settings?

    Tammy,
    Unfortunately your iPhone is just a paper weight. Return it to the pawn shop for a refund.
    iCloud: Find My iPhone Activation Lock in iOS 7 explains the "Buyer Beware" facts:
    When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
    Follow each of these steps to make sure that you can use the device you purchase:
    Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
    Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in toicloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
    You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

  • How can I reset the number authorized Macs in my account?

    How can I reset the number authorized Macs in my account? Two old Macs that I no longer have are still authorized, which leaves me with three working macs at home.

    Hello Joe
    You will find your answer on this page. In summary you have to deauthorize each of the 2 Macs on the Mac thenself. If it's no longer possible, then you have to deauthorize all five Macs and then reauthorize each 3 remaining
    http://support.apple.com/kb/HT1420
    Bye

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

Maybe you are looking for

  • Zen MicroPhoto Problems! PLease,I Really Need Help!!

    hello everybody, i bought a zen microphoto 4GB in June and it worked perfectly until two days ago. I turned it on like i do everyday to listen to music on my way to school. i downloaded the newest version of firmware onto it'sthree days before. when

  • Can I use Oralce9i database to depoly BC4J without using Ora9ias

    Oralce9i database has so many components help you develop application, for example JSP,SERVLET,I want to know when I need oracle9ias for developing,in what case I only need oracle9i database for developing including its components?

  • How to know currently running ddl  by dba_views in oracle 9i

    sql_hash_value in v$session is showing 0 .presently create table is running which is done by copying from another table. Edited by: apusumit on May 16, 2012 1:46 AM Edited by: apusumit on May 17, 2012 12:08 AM

  • IWeb Newbie: Blog HTML Question

    Hi, I'm relatively new to IWeb and have a question relating to blogs created in Iweb. When I create a new entry for my blog, and try to add a video for youtube (as a link) in place of the default picture, the video does not appear on my main page. I

  • How to deactivate particular queries temporarily in Bex

    Hello, I want to know, if there is any option, so that we can deactivate the queries and then it will not be displayed in the Business Explorer query hierarchy Is it possible?