How can I reset the settings of one Yosemite Account?

Hello. How can I reset the dock, preferences, etc. of only ONE Yosemite Account instead of the whole computer. Yes, I know that I can just make a new account, but I don't really want to do that. Please help.

iOS: Forgotten passcode or device disabled

Similar Messages

  • How can be reset the security questions in apple account if it been disable

    How can be reset the security questions in apple account if it been disable

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • How can I reset the settings for my Ipod Video on the Ipod source list.

    I accidentally choose the 3rd option (do not update video) on the Ipod option button >>> video <<< and for that reason I can't download or play video. How can I reset the setting in order for me to enable to update my Ipod for the videos manualy.
    I open itunes and select the Ipod in the source list, then click on the option button and click video. But from there, I can't select the options... please advice ASAP, Thanks...<br>
    Pentium iii   Windows XP   Desktop

    Read this and see if it helps:"Syncing videos to your iPod" http://docs.info.apple.com/article.html?artnum=302509

  • How can i reset the settings?

    when i go to Google and search for something it open me the search results
    when i open one of these results it doesn't open the link in the same tap it open it the link on a new tap
    i don't want that
    i want it to open the link in the same tap
    so any help please?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
    '''''Note:''' After resetting Firefox, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Reset Firefox – easily fix most problems]] article for more information.
    To Reset Firefox:
    # Open the Troubleshooting Information page using one of these methods:
    #*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
    #*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
    #At the top right corner of the page, you should see a button that says "Reset Firefox" that looks like this: [[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After it is done, Firefox will show a window with the information that is imported.
    #Click Finish and Firefox will reopen.
    Did this fix the problem? Please report back to us!
    Thank you.

  • How can i reset the password to my icloud account?

    the only email account I have connected is my icloud one and that is where the password reset is being sent.

    iCloud: Change your iCloud account password - Support - Apple

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • How can I save the settings of my iPhone 4 before resetting the phone in addition to saving the apps etc. by synchronisation with i-tunes

    How can I save the settings of my iPhone 4 before resetting the phone in addition to saving the apps etc. by synchronisation with i-tunes

    All the phone settings are save in the backup which is automatically created when you sync the phone.
    http://support.apple.com/kb/HT1766
    Please clarify what you mean by "resetting" the phone. When you reset the phone, no data is deleted.  Do you actually mean Restore the phone?  See the User Guide, Appendix B for the correct terminology,
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • HT201441 i have an ipad and the original owner is not present and i have no way to contact them how can i reset the ipad back to factory settings?

    i have an ipad and the original owner is not present and i have no way to contact the owner how can i reset the ipad to factory settings?

    Tammy,
    Unfortunately your iPhone is just a paper weight. Return it to the pawn shop for a refund.
    iCloud: Find My iPhone Activation Lock in iOS 7 explains the "Buyer Beware" facts:
    When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
    Follow each of these steps to make sure that you can use the device you purchase:
    Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
    Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in toicloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
    You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

  • I forgot my password in the restrictions settings. I have 8 failed attempts now. How can I reset the pass code?

    I forgot my password in the restrictions settings. I have 8 failed attempts now. How can I reset the pass code?

    YOU CAN ALSO FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

    How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
    I have seen this question asked previously and it seems there is no answer.
    I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
    ... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

    Press CTRL + 0
    Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
    You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    You can find more information about the zoom features Firefox offers in these articles:
    [[Text zoom]] - For zooming text only
    [[Page zoom]] - For zooming the whole page (including images etc.)

  • How can I reset the screen colors/resolution on an old white macbook?

    My screen shows neon colors and a zigzag shapes.  How can I reset the color resolution?  This laptop was supposedly fixed but when returned all my data had been "lost".  The certified mac tech said he reinstalled the OS but lost all my desktop files and HD and couldn't recover.  ODDLY, when I started the machine and started fresh, my old hard drive was still there!  Although he'd wiped out my current desktop files- gone.  But, the  screen colors went wonky all of the sudden and I don't know how to resert or correct the resolution.  Can any one share a suggestion?

    With that kind of issue after returning from a repair where a tech was inside the computer, it should be returned to the same place for an evaluation of the problem, a diagnosis, and perhaps they need to check their work to see if something came loose while they had it apart.
    The System Preferences> Displays has a panel to select settings.
    You may have to try & see about a reset of System Management Controller http://support.apple.com/kb/HT3964 Or, if reset of NVRAM  http://support.apple.com/kb/HT1379 may help. Not sure if these would do anything if there is hardware damage.
    Good luck & happy computing!

  • How can I change the settings so when I delete an email from my iPhone it will also delete from my iPad.....very sick of deleting the same emails two times

    How can I change the settings wit mail so that when I delete my Verizon email from my iPhone it will also delete from my iPad too.... Seems like I shouldn't have to delete my email in three places...iPhone ..iPad ...and desktop

    Don't know which email host you are using, but if this is a POP account, you can't do it. If IMAP, then deleting one email should delete it on all other devices.

  • My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?

    My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
    I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.

    In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
    I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
    You'd need to add an account here:

  • How can I change the settings on my iPhone 5 so that I get new emails automatically? Without having to open the mail app.

    How can I change the settings on my iPhone 5 so that I get new emails automatically? Without having to open the mail app.
    Thanks!

    No, they will all follow the default setting. If you want them all to fetch, for example every 15 minutes, then set it to 15 minutes in Fetch. I only mentioned the other if you wanted to leave one for manual. I have an account on my phone that is a POP account that I get mail at home from. I let my home computer get this mail, but when I am out of town, I pick it up with the iPhone. That one is set to manual.

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

Maybe you are looking for

  • Need Help ! how can I Pass Variable from JApplet to PHP?

    I think I post to the wrong forum and I don't know how to change. Sorry for messing thing. I try to send variable for applet to php but the result is no data was recorded in my database. I think the data did not transfer to php. I am familiar with ph

  • Which cat, which iLife, which OS?

    I have done no paid upgrades since purchase over 3 years ago and have 10.3.9. I figure it is about time to upgrade but how? Should I just buy a new iMac fully loaded or just upgrade my software? The only things I use it for are surfing the web, email

  • Where do I get HP8753ES drivers for Labview 8.2?

    Hello,   I am in the process of updating some Labview code to 8.2. Where do I find drivers for the HP8753ES that is compatable with Labview 8.2? I looked at the NI website and the drivers listed are for Labview 8.0, will they work with Labview 8.2? T

  • OM related issue

    Hi All Have uploaded data in the IT 0001 thru BDC. IN OM the holders are not getting assigned (rather its not getting reflected there)....I ran RHINE00 report & created the eraltionship b/w the Person & position also but still its not coming up in th

  • Production Down Time costs.

    Hi all, 1.How to record Production order down time when a workcenter is down.  The reason for this is to find out how much time the production order is delayed because of  machinary problem. does that cost should go to Production Order or to Cost Cen