How can I resize table row height?

I found that there are some method which can set the resize model for table column. Is there any of them to set the row height resize? Because some cell value in my table will across two lines.

method but no auto resizeWell, thats not what your original question asked. I'm not a mind reader.
Your out of luck, you need to calculate the size yourself.

Similar Messages

Resize table row height dynamically

Hi All,
I have a requirement to display four item texts in one of the table column. I had created a subform with four texts in that column. I am getting the data as required, but by default the table row size has increased because of four texts in the column. At times, i have only data in two texts, still getting the default size of the row(0.41in height), how can i adust the height based on the data. How can i adust the row of the table dynamically.
Thanks,
Kumar

Hi Kumar,
I did similar to this, where as my table is entirly designed in subforms, so there is no auto setting of the columns of a row.
I had the below code, which finds the maximum height of a coulmn element and sets its height to all of the coulms of a row instance.
I call this function on layout ready event of the row, as below
ItemGenerator.setHeight(this);
function setHeight(rowData){
     if(rowData.presence == "visible"){
//             xfa.host.messageBox("height set start in layout ready");
           var yearH = parseFloat(xfa.layout.h(rowData.FinYear,"in")).toFixed(3);
//           xfa.host.messageBox("1");
           var ipaH = parseFloat(xfa.layout.h(rowData.IPAType,"in")).toFixed(3);
//           xfa.host.messageBox("2");
           var expenseH = parseFloat(xfa.layout.h(rowData.ExpenseType,"in")).toFixed(3);
//           xfa.host.messageBox("3");
           var descH = parseFloat(xfa.layout.h(rowData.Description,"in")).toFixed(3);
//           xfa.host.messageBox("4");
           var payH = parseFloat(xfa.layout.h(rowData.PayType,"in")).toFixed(3);
//           xfa.host.messageBox("5");
           var payconH = parseFloat(xfa.layout.h(rowData.PayConditions,"in")).toFixed(3);
//           xfa.host.messageBox("6");
           var acqconH = parseFloat(xfa.layout.h(rowData.AcqittalCond,"in")).toFixed(3);
//           xfa.host.messageBox("7");
           var maxHeight = Math.max(yearH,ipaH,expenseH,descH,payH,payconH,acqconH)+"in";
           var marginBottom = parseFloat(Math.max(yearH,ipaH,expenseH,descH,payH,payconH,acqconH)- 0.2).toFixed(3)+"in";
//           xfa.host.messageBox("max height = "+maxHeight);
//           xfa.host.messageBox("bot margin = "+marginBottom );
           rowData.h = maxHeight;
           rowData.IPA.h = maxHeight;
           rowData.IPA.margin.bottomInset = marginBottom ;
//           xfa.host.messageBox("8");
           rowData.FinYear.h = maxHeight;
//           xfa.host.messageBox("9");
           rowData.IPAType.h = maxHeight;
//           xfa.host.messageBox("10");
           rowData.ExpenseType.h = maxHeight;
//           xfa.host.messageBox("11");
           rowData.Description.h = maxHeight;
           rowData.ReqAmt.h = maxHeight;
//           xfa.host.messageBox("11");
           rowData.RecAmt.h = maxHeight;
//           xfa.host.messageBox("12");
           rowData.PayType.h = maxHeight;
//           xfa.host.messageBox("13");
           rowData.PayConditions.h = maxHeight;
//           xfa.host.messageBox("14");
           rowData.AcqittalCond.h = maxHeight;
//           xfa.host.messageBox("15");
           rowData.Remove.h = maxHeight;
           rowData.Remove.margin.bottomInset = marginBottom ;
//           xfa.host.messageBox("finally");
Hope something of this sort might helpful to you.
Cheers,
Sai

How can I export table row in internet explorer?

I need to export a single table row on a website and I can't figure out how to do it. The source view for the row I need is:
tr class="alt">
<td id="16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE">16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE</td>
<td></td>
<td></td>
<td>0.00065227</td>
<td>0.01233629</td>
<td>0.00371003</td>
</tr>I can get the table ID using the code below, but I don't know how to get the rest of the values. The table ID does not change but the numerical values do.$ie = New-Object -com InternetExplorer.Application
$ie.silent = $false
$ie.navigate2("mywebsite.com")
$ie.Document.getElementById("16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE")

Hi Tom,
this may not be quite the perfect solution, but it works for me at least. I'm not using the IE ComObject, but rather the .NET Webclient for it ...
# Load downloader function
function Get-WebContent
<#
.SYNOPSIS
Downloads a file
.DESCRIPTION
Download any file using a valid weblink and either store it locally or return its content
.PARAMETER webLink
The full link to the file (Example: "http://www.example.com/files/examplefile.dat"). Adds "http://" if webLink starts with "www".
.PARAMETER destination
The target where you want to store the file, including the filename (Example: "C:\Example\examplefile.dat"). Folder needs not exist but path must be valid. Optional.
.PARAMETER getContent
Switch that controls whether the function returns the file content.
.EXAMPLE
Get-WebContent -webLink "http://www.technet.com" -destination "C:\Example\technet.html"
This will download the technet website and store it as a html file to the target location
.EXAMPLE
Get-WebContent -webLink "www.technet.com" -getContent
This will download the technet website and return its content (as a string)
#>
Param(
[Parameter(Mandatory=$true,Position="0")]
[Alias('from')]
[string]
$WebLink,
[Parameter(Position="1")]
[Alias('to')]
[string]
$Destination,
[Alias('grab')]
[switch]
$GetContent
# Correct WebLink for typical errors
if ($webLink.StartsWith("www") -or $webLink.StartsWith("WWW")){$webLink = "http://" + $webLink}
$webclient = New-Object Net.Webclient
$file = $webclient.DownloadString($webLink)
if ($destination -ne "")
try {Set-Content -Path $destination -Value $file -Force}
catch {}
if ($getContent){return $file}
# Download website
$website = Get-WebContent -WebLink "http://www.mywebsite.com" -GetContent
# Cut away everything before the relevant part
$string = $website.SubString($website.IndexOf('<td id="16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE">'))
# Cut away everything after the row
$string = $string.SubString(0,$string.IndexOf('</tr>'))
# Split the string into each individual line
$lines = $string.Split("`n")
# Prepareing result variable
$results = @()
# For each line, cut away the clutter
foreach ($line in $lines)
$temp = $line.SubString(4,($line.length - 10))
# for the first line, the td has an id, which this compensates for
if ($temp -like 'id="16ZwhxLjCN8fafA8wuYEnMFtGJGrFy6qcE">*'){$temp = $temp.SubString(($temp.IndexOf(">") + 1))}
# Add cleaned line to results
$results += $temp
You may need to adapt the string parsing beneath the function, if the text you posted is not literally identical to the way this function returns it. It worked for a string block acquired via copy&paste from your post anyway. :)
I certainly would be more than happy to read a more elegant version, if someone has one to offer.
Cheers,
Fred
There's no place like 127.0.0.1

How can reference one table row? Thanks!

Hi, everybody:
I want to create table that one column reference another table row, for example:
CREATE TABLE tab1 (...);
CREATE TABLE tab2 (id ..., tmp tab1%ROWTYPE, ...);
but display error message:
ORA-00911: Invalid character
that point the "%".
Thanks very much!

In Oracle, you can use the %TYPE and %ROWTYPE attributes only in PL/SQL code, not in SQL DDL statements.
But you can use them in CREATE TYPE statements.

How can I restore table rows to their original, unsorted order?

I understand that I could've manually created an "Order" column of sequential numbers and then sort by that.
What I'm looking for is an "unsort" that restores rows to the (manual) order they were in before any sorting was applied.
(Or does Numbers '09 permanently replace the pre-sorted order? That'd be a bit ...err ...'80s.) ;-]

Simon Poisson wrote:
Thanks Jerry,
Seems I assumed that sorting in Numbers '09 merely applied a reversible "view", much as its Insert Categories function does.
For a Sheet with hundreds of rows, then, how would I apply the original order from a backup to the current edited, sorted rows?
Or are we meant to manually locate and then drag each and every one of the hundreds of rows back to its original order? (That's about 6 hours or more of the unpleasant manual work that computers are supposed to do for us!)
It's unfortunate that you made a false assumption about the sort feature. Numbers does indeed move the rows about as does every other spreadsheet app I've used.
I wonder if there is anything in your data that you could sort on that would get you close to the original order. If you know how you would move the rows about, could you express that as a rule? If there's nothing in the data that is correlated to the order of the rows, then the order of the rows may not be extremely significant.
Jerry

How can I set the row height in iCal

Hi,
I have a job that has odd hours, some at 0800 in the morning, some at 2100 at night. To keep track, I use iCal.
On the monitor of my 13" MacBook, the iCal window only shows 11 or 12 hrs max of each day. I can zoom in or out, which makes the window bigger and smaller, higher and lower, but the iCal data adjust size with it. I can never see a whole day, i.e. 14 hours at once.
How do I make iCal display more than 11.5 hours of the day?
Axel

I found the answer here: https://discussions.apple.com/message/16323733#16323733

How can I use table headers only without using rows.

how can I use table headers only, without using rows and without leaving the space.
If anyone could say me how to paste the pic in this questions, I would have shown it.
The flow of view is in this way
{Table header(table on top of table)
column header1___|| column header2__ || column header3__ ||}
<b>Here is the blank space I am getting, How to avoid this space?this space is of one table row height</b>
{Contents column1 || Contents column2 || Contents column3 || (This is of other table below the uper table)}
I am using scroll for the content part of table only.
So I am using two tables.
I am using NW04.

I did the possibles you explained, but couldn't get rid off the space.
Any other solutions?
I am keeping the header static and the content columns scrollable.
I have used two tables one to display header above and the other to display only the contents.
I have put the contents table in scroll container.
And the header table in transperent container.
Thanks and Regards,
Hanif Kukkalli

How can I insert one row in ADF Table in JDeveloper 10.1.3

Hi all,
How can I add new row ADF Table in JDeveloper 10.1.3
NOTE : I tried using create button still not working
thanks

If you are using ADF BC - try replacing the binding of the operation from Create to CreateInsert.
See Re: A simple JSF Table CRUD - How To

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

Report Generation Toolkit Table Row Height-MS Word

I am having trouble setting the table row height in the report generation toolkit. I can set the column width fine, but the row height seems to remain the same no matter what I set it to. I have attached the VI that generates and formats the table, and the printout it is resulting in. I have also attached the template file I am using.
Any tips to get this to work right? I am trying to make the cells exactly the same height as the text inside.
Solved!
Go to Solution.
Attachments:
AddMarkersToReport.vi ‏20 KB
badFormatting.pdf ‏179 KB
splitter.docx ‏13 KB

Hi,
So I tried .2 and it didn't work. So I went to Word to manually change it, and it did not work either. There is a selection box in word, for the table properties, that seems to default to the value "at least". When I changed this manually to "exactly" in word, no problem with the .2 manually in Word.
Hopefully this can be set within the template, for all new inserted tables. I'm not sure the report generator VI's expose this property. Well, this is a start for the issue.
Edit ****
You can go into the add table VI and expose the property. See pic. However, you have to decide if you want to "upgrade" this VI permanently to expose this property or make a copy with the property exposed. I haven't messed with the new class reports too much, so not sure of the ins and outs with this.
I think this is the issue with the row size becoming smaller.
Mark Ramsdale

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

How can I add a row into a JTable with JButton

Hi all. I have the following code:
package gui;
import db.*;
import javax.swing.table.AbstractTableModel;
import java.util.ArrayList;
public class FoundersTable extends AbstractTableModel{
    private static final int COLUMNS = 8;
    private String columnNames[] = {"�� ", "��", "��", "��", "��", "��",
            "�� ", "�� , ��"};
    private ArrayList data;
    public FoundersTable(){
        data = new ArrayList();
    public int getRowCount() {
        return data.size();
    public int getColumnCount() {
        return columnNames.length;
    public String getColumnName(int colIndex) {
        return columnNames[colIndex];
    public Object getValueAt(int rowIndex, int columnIndex) {
        return ((ArrayList)data.get(rowIndex)).get(columnIndex);
    public void setValueAt(Object value, int rowIndex, int columnIndex) {
        ((ArrayList)data.get(rowIndex)).set(columnIndex, value);
        fireTableCellUpdated(rowIndex, columnIndex);
    public void addRow(ArrayList neueZeile) {
        data.add(neueZeile);
        int index = data.size() - 1;
        fireTableRowsInserted(index, index);
    public void removeRow(int index) {
        data.remove(index);
        fireTableRowsDeleted(index, index);
    public void removeAllRows() {
        data.clear();
        fireTableRowsDeleted(0, 0);
    public boolean isCellEditable(int rowIndex, int columnIndex) {
        return true;
}Now in my MainJFrame class I have one button for additing and one button for removing a selected row. How can I add/remove rows with this two buttons.
Thanks

No my question is how can I add and remove rows WITH buttons My point was the code is the same. You use the addRow(...) method. Why did you write an addRow(...) method if you aren't going to use it?
I don't understand your problem. Do you not know how to write an ActionListener?

How to reject external table rows with some blank columns

How to reject external table rows with some blank columns
I have an external table and I would like to reject rows when a number of fields are empty. Here are the details.
CREATE TABLE EXTTAB (
ID NUMBER(10),
TSTAMP DATE,
C1 NUMBER(5,0),
C2 DATE,
C3 FLOAT(126)
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DAT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
LOAD WHEN (NOT (c1 = BLANKS AND c2 = BLANKS AND c3 = BLANKS))
LOGFILE EXT_LOG_DIR:'exttab.log'
BADFILE EXT_BAD_DIR:'exttab.bad'
DISCARDFILE EXT_BAD_DIR:'exttab.dsc'
FIELDS TERMINATED BY "|"
LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL
FIELDS (
ID,
TSTAMP DATE 'YYYYMMDDHH24MISS',
C1,
C2 DATE 'YYYYMMDDHH24MISS',
C3
) LOCATION ('dummy.dat')
REJECT LIMIT UNLIMITED
So, as you can see from the LOAD WHEN clause, I'd like to reject rows when C1, C2 and C3 are empty.
The above statement works fine and creates the table. However when I am trying to load data using it, the following error is produced:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "not": expecting one of: "double-quoted-string, identifier, (, number, single-quoted-string"
KUP-01007: at line 1 column 41
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
It seems that external tables driver does not understand the "NOT (...)" condition. Could anyone suggest how I can achieve what I want in a different way?
Thank you.
Denis

Another method would be to simply remove the "LOAD WHEN condition" and create a view on the external table which filters the data.
CREATE EXTTAB_VIEW AS
SELECT * FROM EXTTAB
WHERE not (c1 is null and c2 is null and c3 is null);

How can I add new row/column into existing jTable?

Hi add!
Can you help me how can I add new row/column into existing jTable?
Tnx in adv!

e.g
Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
their handlers are:
add new row:
//i supose u already have
DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
//and
   JTabel jtable = new JTable(tablemodel);
// Handler (row)
jbtAddRow.addActionListener(new ActionListener(){
   public void actionPerformed(ActionEvent e) {
      if(jtable.getSelectedRow() >= 0 )
          tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());
       else
            tablemodel.addRow(new java.util.Vector());
    });to add new columns its the same but inside actionPerformed method:
ask for e.g "Whats the name for the new column"
then,
   tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
Message was edited by:
Java__Estudante

How can I resize a JFrame ,to fit into the screen size

I have a Jframe which has JPanel and JPanel contains lot of other components.JPanel size is 980,1400. when i use JFrame.show method jpanel goes beyond the screen size in length and I am not able to see the portion below the screen.How can I resize the JFrame so that JFrame and JPanel shrinks to fit into the screen size.I need this because I have a PRINT button at bottom of the JPanel.Thanks.

Thank you for your reply.I tried with the following code as you have told.But the frame is still going beyond the screen.Can you please look into it and tell me whats wrong ?
//public class PlayerRegForm extends javax.swing.JFrame implements Printable
public static void main(String args[]) {
PlayerRegForm prf = new PlayerRegForm();
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
Dimension frameSize = prf.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
System.out.println("Screen Size ----------------- " + screenSize);
System.out.println(" Frame Size ----------------- " + frameSize);
prf.setSize(frameSize.width, frameSize.height);
prf.pack();
prf.show();
=============================================================================
Screen Size ----------------- java.awt.Dimension[width=1024,height=768]
Frame Size ----------------- java.awt.Dimension[width=112,height=28]

How can I resize table row height?

Similar Messages

Maybe you are looking for