How can i resset and create a new password cause i forgot my password and i can't connect anymore?
how can I get a new password because I forgot my password
connect the iPod to your syncing computer and restore it via iTunes. If it asks for the unknown passcode, place the iPod in recovery mode and then restore it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
How do I create a new password for my Airport Extreme if I do not know the old password?
If you have the Mac that you used to configure the AirPort Extreme originally, you may be able to retrieve the password from KeyChain Access.
See this User Tip from forum expert Tesserax:
AirPort - Regain Access from Forgotten Passwords
If still no luck, you can reset the passwords again. Pay very close attention to the information about a Soft Reset in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ -
How can i connect my iphone to a new itunes library without losing my contacts and photos ?
how can i connect my iphone to a new itunes library without losing my contacts and photos ?
Is the new iTunes library on a different computer, or the same computer?
Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact. -
How can i connect a Wireless Keyboard and a Trust mouse with a brand new Mac mini?
How can i connect a Wireless Keyboard and a Trust mouse to a brand new Mac mini?
Go to the Bluetooth icon on the menu bar and select "Set Up Bluetooth Device". Follow the wizard.
Alternatively, if you haven't yet unboxed and setup the Mini, you can pair the keyboard to the Mini (and possibly the mouse). However, I would set up with a USB keyboard and mouse and pair the Bluetooth devices afterwards. -
How do you allow a user to create a new password?
The way i have it set up right now the users are registered by the admin and a random password is provided for them to log in. When they login they're instructed to create a new password.
They click to update their information. Included in this form is an "Old Password" field and a "New Password" field. They can choose if they want to create a new one or not. So I don't want to make it a requirement.
1 - How do I validate the old password.
2 - When they type the new password and submit the update info form. It inserts the new record over the old. But only after confirming that that old password is correct. How is this done?
Or should they just type in a new password with no validation that they know the old. ? Hm.
Please let me know. Thank you.
Eddie AdolfHi frunsel,
if the user choose a name where already exist, the error throws out, but it clears all the register fields (all the users entrys, and i have a few fields)
humm, that´s not cool -- however...
how can i prevent this?
In this case I suggest providing a separate "check username availabilty" procedure in a blank window
(or a popup window, if you prefer) which ...
a) on page 1 has a form with one "check_username" text field, and on...
b) page 2 queries the login table´s "username" column against the textfield´s value and returns "username available" when no matching records were found, respectively "username already allocated" in case of a match.
That´s something I´d do without using ADDT, means DW´s native database related functionality are absolutely sufficient for such simple stuff
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
How can I connect a MacBook Air (new) to a Sony Bravia TV
How can I connect a MacBook Air (new) to a Sony Bravia TV
This Mini DisplayPort to HDMI adapter will let you see and hear your Mac on your HDTV - http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5311&seq=1&format=2
-
Plz I need help in how can I connect my iPad the new one (4G) to the iTunes while I don't have pc
Use a neighbors or something. You can use any computer to update and restore it. Once it's to the startup screen your good to go. Yes the apple store can help you too.
-
How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?
Dear experts,
My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
I have some question below.
1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
2. Current Rack has LC type patch pannel from B-side to Rack A side.
But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
3. Old 6509 links use many MMF cable, and new Nexus use SMF.
Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
Please let me know in detail, Thanks in advance, I really appreciate for your help.
Jason.Hi Leo,
Thanks of your reply.
Dear Experts,
I seek your expert's advice for another question urgently.
Please make you time and share your experiecce.
Thanks.
Jason -
I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.
Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M. -
How can I connect my new 11" air by thunderbolt to my DVI-D monitor?
How can I connect my new 11" air by thunderbolt to my DVI-D monitor? I have seen mini-display to dvi-d, but am unsure that this will work with thunderbolt port?
With a Mini Display Port to DVI adapter. Mini displayport and TB are one in the same.
-
How can I connect my existing firewire drives to the "new" Macbook pro
I'm thinking about getting a new Macbook Pro, to take on the road.
I already have four external drives with firewire and USB 2.0 ports.
After I looked at the new machine I noticed it only had USB 3.0 and Thunderbolt ports.
I dont see any Firewire to Thunderbolt technology out there nor do I see any USB3.0 to anything technology. How can I connect my drives to the new system?You can use the USB3 connections for USB2. That's downward compatible. Just runs at USB2 speed.
Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire. But the FW adapter is not at the apple store as yet (at least at the time I am posting this). -
I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?
The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them. -
My iPhone 3GS is stocked on apple logo while restarting my iphone. Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..
I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has never been hacked or jailbroken. We and a few others are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are not having the same hardware issue all of a sudden at the same time.
-
How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port
I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port
I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
Thanks. -
How can I connect my iPad 2 to iTunes? Thanks
Hi There,
What version of iTunes have you got installed on your computer and what operating system are you running?
Have you tried reinstalling the latest version of iTunes?
J.C -
how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.
Yes, try to restore your iPhone from iTunes or iCloud backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Tell us the result if you will try.
<Link Edited By Host>
Maybe you are looking for
-
Freight does not auto fetch in Outgoing Excise Invoice??
Dear Expert, When i select ExciseVAT tax code at Raw Level Freight 1 Tax Code in Sales Delivery & add transaction. Then when i try to made Outgoing Excise Invoice, system does not fetch Freight amount & selected ExciseVAT tax code & Freight Tax Amoun
-
How to create an editable table in webdynpro for ABAP? Help!
Hi Experts, I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP. how can I achieve this? Is there any suc
-
I'm importing DV content from a Canon ZR90 camera (4-5 years old model). - iMovie does not let me set the import as automatic. It is always on manual. So I assume the automatic mode only works with certain camera model? - My actual setup is VCR (VHS)
-
Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English
-
Where are the FileInfo panels for Photoshop CC?
I need to install a custom one that is working for CS5 and CS6, so that it can be seen and used in CC. But I don't know where to put it? (on the Mac) for CS5 it goes here: Main 3.0: /Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0/