How can i restart my iPhone 4 accidentally erased from remotely of fine me

Hiiii
I one to restar my son's iphone 4,
last night i was using fine me in my iphone 4s and i erase my son's iphone 4 dives in my iphone 4s,
i accidentally erase from fine me,
pls. help me how to restar?
it's not starting, there are in serch mode now.
pls. help.

i just conect in itune but itune can't found it.
can't turn off also,
i turn off using "turn on/off" switch and the "round main" switch.
it's start for 10 second and then again turn off and now is in searching mode.
pls. help.

Similar Messages

  • How can i restart my iphone?, how can i restart my iphone?

    how can i restart my iphone?, how can i restart my iphone?only the apple logo will appear but I cannot open the screen..

    Try a restore
    http://support.apple.com/kb/ht1414
    If that doesn't work, recovery mode
    http://support.apple.com/kb/ht1808

  • Can I recover notes I accidentally erased from my iPhone? I have the newest software and updates and I use iCloud.

    Can I recover notes I accidentally erased from my iPhone? I have the newest software and updates and I use iCloud.

    Is your carrier still AT&T? What error message do you get when you try to activate it?
    Have you tried a new SIM? Was the phone jailbroken? Was the computer you used to update it ever used to jailbreak a phone? In general, this problem is caused by one of the following:
    1. Your antivirus is blocking access to gs.apple.com.
    2. Your phone is jailbroken.
    3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
    4. Apple's activation servers are down (very rare, and never for more than an hour or so).
    For 1. try disabling your antivirus.
    For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

  • HT1430 How can I restart my iphone 4 with no sleep button and frozen apps?

    how can I restart my iphone 4 with no sleep button and frozen apps?

    So, I called support this morning, if this happens to you, call them.
    There's nothing you can do on your own at this point (without voiding a warranty.)

  • I had over 200 e-mails.  I went to my webmail and deleted most of them.  However, my iPhone still shows 200 e-mails.  How can I force my iPhone to update from the e-mail server?  Or will I have to delete each e-mail from my iPhone as well?  Thanks.

    I had over 200 e-mails.  I went to my webmail and deleted most of them.  However, my iPhone still shows 200 e-mails.  How can I force my iPhone to update from the e-mail server?  Or will I have to delete each e-mail from my iPhone as well?  Thanks.

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • How can I get my iPhone 4 unlocked from orange/EE, phone was given to me by a third party?

    How can I get my iPhone 4 unlocked from orange/EE, phone was given to me by a third party

    Contact Orange.  Only they can unlock it.

  • How can I take my iPhone & iPad backups from my iMac at home with me while travelling using my Macbookair (128Gb SSD) with an ext. HD?

    How can I take my iPhone & iPad backups from my iMac at home with me while travelling using my Macbookair (128Gb SSD) with an ext. HD? I want to continue to back up my devices including those of my wife while travelling without using the cloud and not returing home for several weeks.
    Any ideas or solutions?
    Thanks for your help.

    You can use any Mac with a recent copy of iTunes to back up an iPhone or iPad. It doesn't have to be the one you usually synch with, so long as you don't let it try to do a synch.
    Just take fresh backups on the MBA. As for how to get the backups onto the external drive, I'll have to leave that to others; I've never tried.

  • HT1430 How can you restart your iphone if your lock button does not work?

    How can you restart or turn off your iPhone if the lock button does not work?

    The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

  • HT201210 how can i restart my iphone from recovery mode

    I had issues earlier re-activating my iPhone 5 and ended up going down the restarting through recovery mode in iTunes.  But I am getting a error message through that process.  Now my phone is in a state of constant iTunes connection.  How can I restart the process or better yet, get out of recovery mode?

    Once you ar in recovery mode you need to restore the iPhone through itunes. If you are getting an error message folllow the article below and it should explain why you are getting the error and what you can do to try and resolve it:
    http://support.apple.com/kb/ts3694
    hope this helps

  • How can I restart my iPhone

    How can I restart my iPhone

    To start the iPhone press and hold the On/Off switch until the Apple logo appears
    If you mean reset then:
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • How can i boot my iphone after erasing using findmyiphone

    I accidentally erased my iphone using find my iphone and removed it also. now it says sim pin locked. how can i boot it again normally?

    Hello Mr.MacMac,
    It sounds like you are trying to restore your device but you are seeing a message about the Sim Pin being locked. I recommend the information in the following article:
    iOS: Understanding the SIM PIN
    http://support.apple.com/kb/ht1316
    You can enable, disable, or change your SIM PIN in the following locations:
    iPhone: Settings > Phone > SIM PIN
    iPad (Wi-Fi + Cellular models): Settings > Cellular Data > SIM PIN
    Note: Some carriers provide SIM cards with a default SIM PIN already enabled. Contact your carrier to find out what your default SIM PIN code is.
    Restoring
    When restoring the device, you will need to unlock the SIM card to complete the restore process. The device and iTunes display the following prompts to notify you:
    To complete the restore process:
    Disconnect the device from your computer.
    Tap Unlock on the device.
    Enter the SIM PIN to unlock the SIM card.
    Reconnect the device to your computer.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How can I restart my iPhone 5c without deleting my messages

    how to restart my iPhone 5c without deleting messages

    Hello iyanafromnull,
    Thanks for using Apple Support Communities.
    Restarting your iPhone will not delete any content from the device, as it is only turning it off and back on.  If you want to restart, please follow the directions below.
    How to restart
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • HT201441 how can i restart my iphone

    how can i activate my iphone

    Try a restore
    http://support.apple.com/kb/ht1414
    If that doesn't work, recovery mode
    http://support.apple.com/kb/ht1808

  • How can i downgrade my iphone 3gs ios from 6.1 to 4.1

    i upgrade my 3gs iphone from 4.1 to 6.1 but unable to activate iphone, and still it is not connecting with itune but now i want to downgrade back to 4.1 from 6.1, please guide me to do this process, and also i want to know how can i factory unlock my iphone 3gs without making a phone call to Apple Care????

    It seems like your phone might be done for then.. I had a White 3G do this to me.. Although I DONT suggest it, smacking it around seemed to get it connected every now and then, but if it was dropped again it would stop working..
    Also, make sure your SIM card is clean & properly inserted into the phone!

  • HT4859 How can I retrieve a note accidentally deleted from my Iphone that was never synced or backed-up to ICould?

    Hey, so I was actively working on a note when I accidentally deleted it.  I hadn't synced my Ipod to my computer or had my phone turned off so that it could sync to ICloud between when I did all the work lost on the note and when I deleted it.  How do I get it back for free?  I downloaded a program that found the deleted note easy enough but then wanted me to pay $99 for their program to get it.  There has to be a way to get it for free.

    If it is not on PhotoStream and you did not backup, it is gone.

Maybe you are looking for

  • Calling ABAP class methods from JAVA application

    Hi All, I want to fetch ITS related information (SITSPMON Tcode) in my JAVA application. But i didnt find much BAPIs for the same. While debugging I came accross few class methods with help of which I can get the required information. So is there any

  • CR error when using 'previous' in formula

    I have a formula that compares the date an action occurred with the date of the previous record if the requester and the application were the same: DateTimeVar e := {HD_IPR_IncidentProblem.Core_CreateDate}; DateTimeVar f := Previous({HD_IPR_IncidentP

  • How to add code in labview exe so that exe don't depend on code

    Hey everybody, I am using labview 8.5. I build exe of my code using snapshot folders. After solving conflicts when exe is created. I remove the code from disk but this gives error when exe is executed. I want to build a exe that don't depend on code.

  • Change the position of subform in adobe forms

    Hi, I have a requirement to change the position of subform(y co-ordinate) in offline adobe forms. My subform is positioned and my code is: this.y = "10 in". Though this question has been answered a few times,I could not find the answer in any of them

  • VPLS between ASR1000 and 7600

    Hello. I'm trying to create VPLS between two ASR1004 routers and one 7600 with ES+ card. IGP/BGP and LDP connections between all routers are OK. Configuration is the following: Cisco 7600: (IP 12.12.12.12) l2 vfi TEST manual vpn id 777 neighbor 8.8.8