How can I restart printing to Epson printer with error message Connection failed: NT_STATUS_BAD_NETWORK_NAME

My Mac Book Pro OSX 10.6.8 has suddenly stopped printing to Epson Stylus Photo RX690 after many successful print runs.
Print attempts are paused with the Message:
Connection failed: NT_STATUS_BAD_NETWORK_NAME
The Epson is shared with a Toshiba laptop with Windows Vista.
All assistance is appreciated!
Cam Opie

Pulling one out of the air here, since it looks like you don't mind trying stuff...
Have you tried it with a trailing slash yet?
About the best I can make out of...
http://www.mail-archive.com/[email protected]/msg42165.html

Similar Messages

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

How do I fix Creative Suite CS2 reinstall with error message "Missing or Invalid Personalization Inf

How do I fix Creative Suite CS2 reinstall on same Windows 7 Pro machine, with error message "Missing or Invalid Personalization Information / Missing Resources Library" when I attempt to reinstall from installation disk set? Was having trouble with Adobe Acrobat Pro 8; Uninstalled and am now stuck. You can email me if you like at [email protected] Thank you.

Hi Bill:
     I don't remember deactivating (after my XP PRO harddrive scattered)
when I did the first Windows 7 pro install of these programs and it went
fairly well except AA8 was a little problematic when converting from MS
Word.
     In my case the AA8 came with a Studio 8 suite of programs as follows:
     1) A Studio 8 installation disk
     2) A Creative Suite CS2 Premium set of installation disks.
     3) A Creative Suite 2.3 Premium upgrade disk with AA8
     I uninstalled AA8 and when I tried reinstallation the directions
said to do the Creative Suite CS2 Premium set of installation disks
first followed by the Creative Suite 2.3 Premium upgrade disk with AA8.
Now I'm stuck; What a mess.
     Thanks for trying to help.
     I will do as you suggest and go to
http://forums.adobe.com/community/creativesuites but FYI:
Bob Lane

How Can I Share Printer with 2 Older Macs?

I would appreciate detailed guidance on how to set up printer sharing for two older Macs - assuming that this is even possible in this case. I have the following Macs that work very well independently as well as through a router for internet access.
1. MacMini, 1.5 GHz, Bluetooth+Airport Extreme (approx. 3 yrs old) running OS X 10.5.2 and using Airport for internet access.
2. Power Mac G4, 466 MHz (approx. 7 yrs old) running OS X 10.3.9 and connected directly to the router for internet access.
An HP Deskjet 5940 printer was used exclusively with the MacMini, and a Lexmarl Z53 was used exclusively with the G4. The Z53 just reached the end of its life, and thus I disconnected the 5940 from the MacMini and connected it to the G4 where it now works fine.
In spite of all attempts with various settings at each Mac, I have not been able to get any printing done from the MacMini. What detailed settings/connections do I need to make so that I can use that 5940 printer from the MacMini?
Thanks for your response.

Please note that I reposted my question to the following category where I have already received suggestions:
Mac OS X v10.3 Panther & earlier > Printing & Faxing > "Can I Share a Printer Between OS X 10.3.9 and 10.5.2?"

TS3308 How can use the printer with iPad

How can you use the printer ( that is connected wirelessly to the same network ) with iPad

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

How can I install PS Elements 10 when get error message, serial number not valid

I have a new computer (PC Windows) and want to install my PS Elements 10 and Light Room 5.2. When I try to do so I get the error message that my serial number is not valid. I have used the help/support and have done what suggested but nothing seems to work. (The copies were registered.) Please help me solve this so that I can't get my pix edited. Thanks so much for any help you can give me.

Cathylof did you receive your installation files for Photoshop Elements 10 on CD? If so are you installing from the CD provided with your purchase? Please also make sure to utilize the registered serial number at http://www.adobe.com/. You can find additional details on how to locate the registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

How can I delete mail when I get an error message saying "195247.emix" couldn't be copied because you don't have permission to access "Messages"?

We have received messages that we cannot open and cannot delete, when we try to delete the messages we get an error message. One of the messages reads, "195427.emix" couldn't be copied because yolu don't have permission to access "Messages". How can we delete these?

Hi Sandy,
Get Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
Search for Name contains...
195427.emix
Choose reveal in Finder, do a Get info on it & the Folder that contains it... what rights & privileges does it show?
Is the folder called Messages?

How could I re-open my mail box with error message :The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?

How could I re-open my mail box, as an error message blocked "The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?" Even I entered re-open, the airbook does not response but prompt the same error message again.

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Sharepoint central administration can not open. It came up with error message: http 503. service unavaliable error messages when attempting to open sharepoint central administration

Pls the problem started when the system administrator change some of the roles all the service accounts on the active directory. So when I restarted the sharepoint server i noticed the following
1) the sharepoint intranet site does not open. it come ups with errror messages
2) the sharepoint central administration could not open as well
Pls what do i do

Hi ticodalo, there could be many reasons for this. Check the following links to see if they help:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/9acc688f-40e0-4f89-81f0-fb165076918e/error-while-opening-sharepoint-central-administration?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/8b5fa7ff-f315-4ab1-80b6-542ad0b66b70/sharepoint-foundation-2010-central-administration-error-503?forum=sharepointadminprevious
cameron rautmann

How can I restart my iPhone 5c without deleting my messages

how to restart my iPhone 5c without deleting messages

Hello iyanafromnull,
Thanks for using Apple Support Communities.
Restarting your iPhone will not delete any content from the device, as it is only turning it off and back on. If you want to restart, please follow the directions below.
How to restart
Press and hold the Sleep/Wake button until the red slider appears.
Drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

How can I get ITunes to work again? Error message reads. "You do not have enough access privileges for this operation!

Why do I get a message, "You do not have enough access privileges for this operation"? This has not been a problem before.

Hello wdesertman,
Thank you for contacting Apple Support Communities.
This article explains what is going on and how to correct it:
support.apple.com/kb/TS1277
http://support.apple.com/kb/TS1277
Regards,
Jeff D.

Q: G40, How can I get the USB to work? Error message: go to a srink...

I have a Thinkpad G40 2388 A9G and the computer is running full so I decided to clean up and in that connection I bought a 16 GB SanDisk mini Cruzer to copy files to from the G40 harddisk. However, now I have spend all day to get this to work and it still does not work. When I plug de USB stick in I do see the one of the two drives, namely E: which is the one with programmes, however I do not see F: which I should use as storage. When I click on E I can from there click on F, however then I receive this eror message: This operation has been cancelled due to restrictions in effect on this computer. Go to the sysadm. I do have adminsuitrator rights and other memory sticks work ok on G40 just as weel as the mini cruzer works fine on other laptops. I thought that maybe it is the driver. However the system claims that I have the most recent driver (from 31 january 2001 which I find a bit old). I have checked the websites from windows, Sandisk and Lenovo. On the Lenovo website it is stated that the USB driver is the one I have, however then it is mentioned that it is for Windows 98E. My OS is Windows XP Pro.
I am about to give up, can someone help?? What do I need to do??
Thanks.

Error 1015 points to an unauthorized downgrade of the iOS or a jailbreak and then attempting to restore to an authorized iOS. The person you bought it from likely jailbroke the device. Use Google to fine a solution as we can't help you with jailbroken devices.
Sorry

How can I get through this Adobe Elements 9 error message

It's been perfectly installed and I'm using a serial number. Everytime I try to go to an old project or create a new one it says "Sorry, a serious error has occured that requires Adobe Premiere Elements to shut down. We will attempt to save your current project." The full layout can't even show because of this. It's just a grey screen and you cannot access the options on the bar they are non clickable expect for New, Open Project, Recent Project, or exit. It's very annoying and I can't even do anything because of this..Does anyone have any solutions or has encountered this? I'm running on a Dell Inspiron which came with the double disk of this and Photoshop Elements 9 which I have no problems with whatsoever.

Hi Oppositeofhood,
Welcome to Adobe Forums.
Please navigate to the below path and rename the syles folder to styles.old
For Windows: C:\Users\bahl\Documents\Adobe\Premiere Elements\9.0
For mac: Open the finder, go to documents>Adobe>Premiere Elements\9.0
Then try to re-launch Premiere Elements and check if the issue persists.
Thanks

How can you make your Facetime work when the error message comes up saying, "The server encountered an error processing registration. Please try again later." I am using the Facetime app on my MacBook Pro 13" Inch

Please answer my question quickly!!!

Hey radyslav,
There's an article that applies to your situation, I'd follow the steps within here:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Take care,
Delgadoh

Can I Air Print with Photosmart C4180?

How Can I Air Print with Photosmart C4180?

Take a look at this link. It will give you information on the options you have
http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

How can I restart printing to Epson printer with error message Connection failed: NT_STATUS_BAD_NETWORK_NAME

Similar Messages

Maybe you are looking for