How can I restore the audio on my iPad?

All of a sudden, I have no audio on my iPad.

All of a sudden, I have no audio on my iPad.

Similar Messages

  • How can I restore the sound on my ipad

    How can I restore the sound on my ipad please?
    I have know idea what happened to it but I am disabled
    and rely on it so much because it is so easy to carry around.
    Please advise me how to restore it. I miss listening to my music
    so much.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • How can I restore the sound in my iPad after using my head phones in it?

    I have lost sound on my iPad after taking out the earphones. Please tell me anything I can do to restore that. This is the second time it has happened. I cannot figure it out. The keys on my keyboard don't click nor the sounds on games. Thanks

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If you haven't got notifications muted then try inserting and removing the headphones again

  • How can i restore the settings in the ipnohe 5 if I actived by mistake voice assistand and I cant access to fix it....

    How can I restore the seeting in the iphone 5??? I have some problems with the audio in whatsaap and magicjack so I tried to fix it and by mistake I changed the setting in the phone and I select something wrong actived a voice program or something like that and I need to tap twice for open everything and i cant access to the full setting to fix it....  please help me!!!  it's driving me crazy, the voice assistant blocks all!!!

    Press Home.
    Tap Settings. Then double-tap Settings.
    Tap General. Then double-tap General.
    Use three fingers on the screen to scroll to Accessibility.
    Tap Accessibility. Then double-tap Accessibility.
    Tap VoiceOver. Then double-tap VoiceOver.
    Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

  • How can I restore the game data from an old ipod touch to a new one?

    How can I restore the game data from an old ipod touch to a new one?

    Restore it from the backup of the old ipod.

  • I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

  • I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • How can I restore the previously bought apps after I have formatted my computer without backing up any of my files for iTunes?

    As titled.
    I bought many apps from iTunes at the end of last year, and then my computer had got problem that I had to format and reinstall everything.
    I just want to know how can I restore the previously bought apps once if I forgot to backup any of my files on the computer??
    Would be really grateful if someone can show me how to. Thanks!!
    FYI: At that time I was using iPad 1 and the OS was still 3.1.x. Now I am using iPhone 4 and would like to restore the apps at least those that are compatible to my phone.

    How to redownload purchased apps from the App Store

  • Is iTunes 11.1.5 compatible with Mac OSX 10.6.8? If not how can I restore the previous iTunes version?

    Problem: Recently when I open iTunes it doesn't work; the little pinwheel just keeps spinning.
    I have tried leaving it on, as suggested by another user, for over 12 hours. I didn't work.
    I think the new iTunes version, 11.1.5, is not compatible with the operating system; Mac OSX 10.6.8. If this is so, how can I restore the previous iTunes version?

    You need to be updated to iTunes 11.2.2.
    You might want to consider running the combo updater over your install to refresh your files.
    Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
    http://support.apple.com/kb/DL1399
    After running the combo updater, select Software Updater and update iTunes.
    If iTunes fails to open after updating, hold down the Option key when launching iTunes. It will ask you to locate your iTunes Library.
    Note: I've seen users with their iTunes Library on an external drive spin like this when the drive was failed to be seen in Disk Utility. Run Repair Drive on the external drive to fix this issue.

  • HT204150 i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad?

    i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad? I have switched my iphone to airplane mode so it is not connected to the internet and so icloud can not wipe it at the moment.
    thanks roy

    There's a menu choice (I think under "Files") that lets you sync purchased items on a device back to itunes.  Look for that.
    iCloud does not store music.  If you want to do that you'd have to subscribe to itunes Match, but to get music to the match servers, you need the music in the itunes library on your computer.

  • A gap between letters started to show in my indesgn files. tried to undo with tracking, the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?

    a gap between letters started to show in my indesign files. tried to undo with tracking, then with the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?
    for example: say i write a paragraph. then, in a weird some sort of way an involuntary gap suddenly appears between different letters of random words(i did not recognize any pattern to the gap appearing) throughout the entire paragraph. once i've double clicked on that paragraph, and made a minor change, lets say tapped a 'space' key, and then clicked ctrl+z to undo, it has aligned(or fixed) the entire paragraph and made it look ok again. i've tried numerous ways to undo the entire thing, but cannot find the reason. i've been working for a few years and there's no reason why this thing all of a sudden should happen right now.
    if anyone has stumbled on something like that and can advise, i would welcome it.
    MNS-KG
    Vadim

    yep...i'm typing with hebrew. i'll make a printscreen with the settings you've asked for@:
    if you look closely you'll see that almost every line has a single letter apart. in hebrew there is no usually a singe letter structured words.

  • I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
    See the Activation Lock FAQ for what you and they need to know.

  • How can I restore the HP's recovery manager back?

    Recently, few days back I found my system had some viruses as my machine got slow day by day. I formated the official windows 8.1 that came with the laptop and also formatted all available partitions too. Now, I need that HP's recovery manager back to restore my laptop to its zero meter state. But unfortunately, I have not find any solution to my question after researching it on the forums. I have a local warranty for my laptop. My machine's model is 15-d000se. Can HP help me suggest how can I restore the factory settings back? Is there any solution to my problem? Can I get that HP recovery manager or is there any alternative solution or software that can do this exact job like HP recovery manager. I need to factory reset my hp machine.

    Since you deleted/format all original partitions, you will need to use the HP Recovery Media you created when you first setup your computer to return your computer to a factory like state. If you didn't create this media, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How can I add the audio content cd after logic finished installing ?

    There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
    If you can help me please be very specific as to how to do it so that I can follow the directions properly.
    Please help me.
    Thanks

    Hi
    You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
    CCT

  • How can i cut the audio from 1 file and put it on another?

    I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
    btw i have quicktime pro is that changes anything

    Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
    Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

Maybe you are looking for

  • 2-Page display in Acrobat 9.1.2

    I have a document created in ID CS4, of multiple facing pages, and exported to PDF.  But when I open it in Acrobat 9.1.2, and switch to 2-Page view, it displays with page one (a right-hand page) moved to the left of the screen, and page 2 (a left-han

  • Phone will not urn on just a black screen

    My phone suddenly wont turn on even if charged.

  • Eps C++ parser

    Hi all, I am not sure if this question belongs here, but I guess this forum should be the most appropriate. I am working with eps (encapsulated postscript) files and was looking for a C++ parser which could parse such files. I tried looking on the we

  • Importing WSDL from Windows Communication Foundation (WCF)

    We've created a new WCF windows service using VS2008/.net 3.5.  Using IE we can find the WSDL.  When using the LabVIEW (8.5) Import Web Service utility, returns an error when referencing the WSDL. Has anyone had any experience accessing a WCF based W

  • Impdp ORA-39166:object not found

    hello i am impporting a table from a database dump using ./impdp propeloper/password directory=dmpdir dumpfile=propeloper.dmp TABLE_EXISTS_ACTION=truncate tables=ops_add_awb_pay and i get this error ORA-39002: invalid operation ORA-39166: Object PROP