How can I restore the count of songs during shuffle play
The old iPod app showed a countdown of songs during shuffle play: '1 of 30'. This feature seems to have disappeared in ios5. Is there any way to restore it? It was an extremely useful feature and I really miss it.
Never mind, finally figured it out. All the advice says to click on the left-most column, but it's actually the second column from the left (the first one, in mky version of iTunes, is the album list.)
Similar Messages
-
I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?
Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling -
How can I restore the game data from an old ipod touch to a new one?
How can I restore the game data from an old ipod touch to a new one?
Restore it from the backup of the old ipod.
-
I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?
you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:) -
I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name. How can I restore the names to my recent calls list?
Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.
-
I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?
In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her. -
As titled.
I bought many apps from iTunes at the end of last year, and then my computer had got problem that I had to format and reinstall everything.
I just want to know how can I restore the previously bought apps once if I forgot to backup any of my files on the computer??
Would be really grateful if someone can show me how to. Thanks!!
FYI: At that time I was using iPad 1 and the OS was still 3.1.x. Now I am using iPhone 4 and would like to restore the apps at least those that are compatible to my phone.How to redownload purchased apps from the App Store
-
Problem: Recently when I open iTunes it doesn't work; the little pinwheel just keeps spinning.
I have tried leaving it on, as suggested by another user, for over 12 hours. I didn't work.
I think the new iTunes version, 11.1.5, is not compatible with the operating system; Mac OSX 10.6.8. If this is so, how can I restore the previous iTunes version?You need to be updated to iTunes 11.2.2.
You might want to consider running the combo updater over your install to refresh your files.
Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
http://support.apple.com/kb/DL1399
After running the combo updater, select Software Updater and update iTunes.
If iTunes fails to open after updating, hold down the Option key when launching iTunes. It will ask you to locate your iTunes Library.
Note: I've seen users with their iTunes Library on an external drive spin like this when the drive was failed to be seen in Disk Utility. Run Repair Drive on the external drive to fix this issue. -
i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad? I have switched my iphone to airplane mode so it is not connected to the internet and so icloud can not wipe it at the moment.
thanks royThere's a menu choice (I think under "Files") that lets you sync purchased items on a device back to itunes. Look for that.
iCloud does not store music. If you want to do that you'd have to subscribe to itunes Match, but to get music to the match servers, you need the music in the itunes library on your computer. -
a gap between letters started to show in my indesign files. tried to undo with tracking, then with the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?
for example: say i write a paragraph. then, in a weird some sort of way an involuntary gap suddenly appears between different letters of random words(i did not recognize any pattern to the gap appearing) throughout the entire paragraph. once i've double clicked on that paragraph, and made a minor change, lets say tapped a 'space' key, and then clicked ctrl+z to undo, it has aligned(or fixed) the entire paragraph and made it look ok again. i've tried numerous ways to undo the entire thing, but cannot find the reason. i've been working for a few years and there's no reason why this thing all of a sudden should happen right now.
if anyone has stumbled on something like that and can advise, i would welcome it.
MNS-KG
Vadimyep...i'm typing with hebrew. i'll make a printscreen with the settings you've asked for@:
if you look closely you'll see that almost every line has a single letter apart. in hebrew there is no usually a singe letter structured words. -
i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?
You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
See the Activation Lock FAQ for what you and they need to know. -
How can I restore the HP's recovery manager back?
Recently, few days back I found my system had some viruses as my machine got slow day by day. I formated the official windows 8.1 that came with the laptop and also formatted all available partitions too. Now, I need that HP's recovery manager back to restore my laptop to its zero meter state. But unfortunately, I have not find any solution to my question after researching it on the forums. I have a local warranty for my laptop. My machine's model is 15-d000se. Can HP help me suggest how can I restore the factory settings back? Is there any solution to my problem? Can I get that HP recovery manager or is there any alternative solution or software that can do this exact job like HP recovery manager. I need to factory reset my hp machine.
Since you deleted/format all original partitions, you will need to use the HP Recovery Media you created when you first setup your computer to return your computer to a factory like state. If you didn't create this media, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I have restored my i phone 4 and trying to restore from the back, but it is asking for the password, but when I entered the Itunes password it is not accepting it, how can I restore the password?
Hello hskod,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting encrypted backups
http://support.apple.com/kb/TS5162
You can keep trying to restore the device from backup until you remember the password. If you're having trouble, try:
Leaving the password field blank
Your Apple ID password
Your computer account password, if you have one
Email passwords you may have used
Your Wi-Fi network password
Website passwords you may have used
A password for hard-disk encryption software, if you use it
Have a nice day,
Mario -
I lost everything in my iphoto library how can i restore the entire library with time machine?
i lost everything in my iphoto library how can i restore the entire library with time machine? help!!!!
Open the folder that contained the library and then enter Time Machine. Select the most recent date that contains the library and then restore.
-
I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
Thanks for your help - your suggestion worked beautifully.Dennis Hood
From: 99jon <[email protected]>
To: Dennis Hood <[email protected]>
Sent: Thursday, 15 January 2015, 15:20
Subject: I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
I'm using Photoshop Elements 12 on Windows 8.1. When I go into the Expert Edit Mode the toolbar available appears in one single column and misses off several tools including foreground and background colour. How can I restore the original toolbar?
created by 99jon in Photoshop Elements - View the full discussionTry re-setting the prefs.Go to: Edit >> Preferences >> General (Photoshop Elements menu on Mac)Click the button Reset Preferences on next Launch If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7099161#7099161 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7099161#7099161 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Maybe you are looking for
-
Secure Store and Excel Services
Greetings, I have an Excel workbook that connects to an external SQL database. A simple stored procedure is executed and the data displayed in a sheet. This is a simple connection and works without issue when I open the workbook in Excel itself. I
-
New features for Numbers: Add yours
Let's create one thread that lists the requests / needs / demands of Numbers users, to help Apple figure out this app, because apparently they need the help. They came up with a somewhat new paradigm, so major props there--but some of the omissions o
-
Reusing a page as a region in other pages
Hi All, I have a requirement. I want to reuse a page as a show hide region in other pages. Please suggest a way to do the same. Version: Oracle Apex 4.2 Thanks and regards, Abhishek Arora
-
Hi, I have to enable LO setup for the following MM data Source: 2LIS_03_BF. I activated the DataSource. Now I have to enable the Collection Run. How to enable the Collection run for it. In SBIW, I have followed the Navigation: Logistics -> Setting Fo
-
Use scripting to create numeric control without inc/dec button
I'm having fun using scripting to do things that were formerly "impossible", such as creating a cluster programmatically from a list of variable names and their associated types (to be used in a subsequent program). When I create a numeric control on