How can I retain quality of mp3 with a single slide that lasts 30 mins?

hi. this may sound like a silly question but.. i am learning a language and have some language mp3 files. each 30 minutes long. i want to listen to them on my mobile phone.but the phone automatically shuts down the screen after so many seconds. so if i want to stop and start my language recording i have to look at the screen and then press once if it has not gone to sleep or twice if it has. i want to just press it in my pocket once for stop and then once again for start. the only way to do this is to convert my mp3 files to videos!!!! because then the screen does not sleep. i want to use a plain black slide as my picture. add the 30 minutes of sound and export as a VIDEO. i want to retain the (good) quality of the mp3. however this seems difficult. i end up with large files which are not so good on sound quality. i am not good at using iphoto. any suggestions or help would be most welcome. thank you. robert

This audio player uses "one slide videos" to play audio files ......
http://www.iwebformusicians.com/Website-Music-Movies/YouTube-Audio-Jukebox.html
The "movie" is made up in iPhoto with one image and the audio track and exported as MP4.
In your case you can export as File/Export/iPhone.

Similar Messages

  • How can I create a horizontal scrollbar with a centered thumb that scrolls content from both sides?

    I am having trouble figuring out how to create a horizontal scrollbar component either by itself or nested inside a data list component that will have it's thumb centered in the track when running and reveal content from either the right or left side when the thumb is moved. The furthest I have managed to get is to create a data list component with a scrollbar component inside that has a centered thumb that reveals content from the right side of the list (0 through 10 of the items) but only reveals blank area when tracking the other way. Is there a way to create say… negative items in the data list… 0 through -10? Or am I approaching this the wrong way. Please help. Thanks.

    Mykola,
    Thanks. I guess I was hoping for an answer that addressed my question from a designer's point of view rather than a developers'. As a designer with over ten years experience using Adobe products for print work it is difficult to understand why "centered" is such a complicated concept when designing art for use on the web. It is so frustrating to realize that most containers for images and text can only be resized by pushing and pulling handles located on the right and bottom; Catalyst seems like a great start but if Adobe really wanted to impress the "design" community it might consider putting all that supercharged code underneath the hood of some more familiar "design" tools. Maybe a "catalytic converter" would allow the introduction of a "centered" tool for every element.
    After all, why is it literally twenty-five times more difficult, requiring the use of three additional programs to create a component that functions exactly like a typical data list and scroll bar with the exception that the thumb is "centered" on the track and reveals images from both the right and left. For that matter why not also have as an option a thumb that snaps to the bottom of the track and reveals images from the top… and one that snaps to the right and reveals images from the left when you run the project? It just seems so logical to expand the scroll bar component to include these options.
    I am very glad to have Catalyst and will redesign my project to fit within the constraints of the tools available in the program but it seems that if Adobe is really serious about Catalyst being a window into the world of web design for designers/AD's that perhaps it might benefit by focusing on what might improve the program from the designer's point of view. I hate to say it but the Catalyst forum is already rife with answers to questions that are riddled with code… Literally. And to be honest most designers don't have the time to decipher that code. As a designer I work regularly and have a deep understanding of Photoshop, InDesign, Illustrator, Acrobat Pro, Final Cut Pro, Final Draft and modo. I do hi-res assembly, retouching, design and layout, identity, production, 3D modeling and rendering, video editing… and before I switch to using Catalyst for web mock-ups I am going to need a more "designer" friendly set of tools and definitely a "centered" control.
    I really think Adobe is fantastic. But I also think it could take a lesson from a great little company called Luxology. I tried learning 3D modeling and rendering for years with programs like Lightwave, Maya and others, always with mixed results. Then Luxology came along and actually delivered on their promise to create a 3D program for artists. What was the factor that made all the difference? Well, besides the Apple award winning interface and sets of tools it was the training available on their sight. The program itself ships with thirty-six hours of quicktime movies. And hundreds more hours available for download. I have never yet not been able to quickly and easily find an answer to a question I had about how to accomplish something in modo. You know how long I have already spent on Adobe TV searching through videos and on the Catalyst forum searching through topics trying to get an answer to what I thought was a very simple question? Way too many. If I have a question about a Luxology product that I can't find the answer to do you know what I do? I call Brad Peebler, the President of Luxology. I'm not special nor do I work for some special development house with special privileges that is simply their policy. And that policy has paid big dividends. Both ILM and Pixar has licensed their technology.
    Well… I apologize for this long response but I really think that if Catalyst is going to attract the market it wants that it will have to consider putting some designers on the development team. After all… Isn't that what the promo videos tout… Finally a web design program for designers. Well, I guess we'll see.
    Karl

  • How can I tell the MacBook Pro with 13-in retina that I purchase is the late 2013 model from the box?

    I'm wondering how I can tell the differences between the late 2013 model and the early 2013 model of MacBook Pro with 13-inch retina from the box?

    You can enter the serial number in the appropriate field on a web site such as this and it will tell you what model it is:
    http://www.chipmunk.nl/klantenservice/applemodel.html
    Ciao.

  • How can I open multiple email messages with a single click?

    On the Mac mini I use at work, I can select several email messages at a time and open them all up by double-clicking the mouse pointer on any of the selected messages. My MacBook Pro at home seems to lack that functionality, even though both are running the same version of Yosemite. In order to open up multiple messages (each, in its own window) on my MacBook Pro, I need to double-click on each individual message, even though I have multiple messages selected on my MacBook Pro, using Yosemite's Mail app. I assume there is an optional setting that can enable multiple messages to be opened by double-clicking on a single selected message, but I have looked through the Mail app's preferences and I come up empty handed. Can someone please clue me in on how to get this functionality on my MacBook Pro?

    Hi,
    There is another similar icon named Bookmarks in the '''Customize''' window which provides the said functionality. You have to add that.

  • How can I populate my PC HD with all the files that are currently on my iPod Classic?

    I think I've changed PCs three times since I've had my iPod Classic 80 gb.
    I think because of this, I have lost copies of files on my PC along the way (probably some of them remained in the earlier PCs and never made it to my current PC) although everything still seems to be on my iPod. So, I often get the message "Cannot locate file."
    Is there a way to populate my current PC with all the files I have on my iPod?
    Simply syncing my iPod doesn't seem to do the trick.
    Thanks for the help!

    You cannot use an iPod backup to restore to an iPad, nor can you use an iPad backup to restore to an iPod.
    Some apps support data syncing through iCloud, but this feature needs building into the app by the developer. If your app doesn't support this, then I believe there is no way to transfer the data between your two devices.

  • We can't export as .m2ts files?? how can i retain full quality?

    so we can import .m2ts files into CS4, we can edit them in CS4, but we can't export them out of CS4?
    how can I retain full quality?

    i see, well i have the hdr-sr12. you can export to h264 blu-ray, then do the following - NTSC, 1920x1080, framerate(mostly you would want 29.97), Field order: UPPER, Profile: HIGH, LEVEL 4.0, VBR-2-pass: 16mbps target rate with max of 18mbps. After that, export and see how it looks like on VLC or windows media player.

  • How can I retain the original quality of a photo when sending it by email.At the moment if I drag them in to the email from iphoto the image quality reduces.

    When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
    How can I retain the original quality.
    Philip

    When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
    Philip, dragging from iPhoto will export previews of the image, not the original high resolution image. To export higher quality versions from iPhoto don't drag, but use "File > Export"
    You can also mail your photo directly from within iPhoto using "Share > Email" and set the "Size" to "Actual Size (Full Quality)"
    Regards
    Léonie

  • I wrote an 2500 words assignment and saved in Microsoft word 97-2003 and by mistake replaced with another word file.How can i retain my original work?

    I wrote an 2500 words assignment and saved in Microsoft word 97-2003 and by mistake replaced with another word file.How can i retain my original work? 

    Hi,
    Does this happen to all 97-2003 Word files?
    Word 2013 now has lots of updates compared with earlier version of Word, lots of features have been updated. Use Word 2013 to open documents created in earlier versions of Word (Word 97-2003 format), you will probably encounter unexpected problems,
    expecially for those heavily formatted files.
    We would suggest you to convert your document to the Word 2013 file format, then you will be able to access the new and enhanced features in Word 2013.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • I wrote a assignment in the microsoft word 97-2003 doc but by mistake replace in the same name but with different thing . how can i retain my orinal file which was as Basel III and Banking law

    i wrote a assignment of almost 2500 words in the microsoft word 97-2003 doc but by mistake replace  a table only in same name  . how can i retain my orinal file which was as Basel III and Banking law

    Hey Christian
    Thanks I havn't seen that post, busy trying it now but no luck so far.
    I defined it in the second one (Content Management - Utilities - MIME Types).
    Tried it now in NWA, no luck either . . .
    What I noticed is no matted what it is defined as in NWA or Content Management, the properties of the mht file still shows Binary File (application/octet-stream)
    Any ideas?
    Regards
    Antonette

  • How can I retain hyperlinks while saving a webpage as PDF via Print?

    How can I retain hyperlinks while saving a webpage as PDF via Print?
    This is the title of an apple forum question, and it is a bug in both Safari 5.1.3 and under, and I find it to also occur in Firefox browser (at least 9.* 10.*, 11.0), running on Lion OS (10.7.2, 10.7.3). See:
    https://discussions.apple.com/thread/3212301?start=0&tstart=0
    Under the newer Mac OS mentioned, and Firefox 10.2, 11.0, 9.*, if I select:
    File -> Print -> PDF -> Open PDF in Preview"
    (and view / save the PDF in Preview, you will see none of the links in the original web page are active
    or using
    File -> Print -> PDF -> Save as PDF...
    same problem. Try this using any Wikipedia page, for example.
    When this problem was posed in Apple forums, by a user of the Safari browser, it was found to be a bug (since Aug 2011) fixed in a Safari browser build 5.1.4 circa Jan 2012. I tried the newer Safari browser and sure enough the problem went away (except that links embedded in the PDF no longer appeared as blue text - ARGH - but "hover over" with the cursor showed the link and clicking the link in Preview viewer activated the link in a browser window).
    So I post this to the Mozilla community, please fix this 'cause I don't want to have to switch over to Safari browser every time I want to archive a PDF with active links!!!!
    P.S. I did a spot-check and with the newer add-on Enjoy Reading 1.0.1 and FF11.0. When the Enjoy reading formatted version appears in the browser window, all URLs/links are preserved and highlighted in blue, but when I print that browser window as PDF, the links are dead (don't work) even though they appear in blue in the PDF.
    So, what's going on, can the Safari fix be researched and applied to FF?
    Also, on some forums, people are responding, Well, try installing Acrobat reader. Well, I don't want to, Preview reader has worked fine for me for years.

    Thanks jscher2000.
    RE: -- '''Generally speaking, PDF converters that work by intercepting a print job do not have access to the URLs behind links in the page.''' --
    I cannot say I agree. I could email you a PDF clipping or two (generated from Safari on Mac OS, in its native capability with no add-ons) that shows you otherwise. When I used PC platforms I did have to install PDF converters (tried both free and expensive ones) that did what I describe.
    I cannot try the add-on you mention, '''Print Pages to Pdf.''' in Firefox. It shows in my browser and Mac OS platform "Not available for your platform." So I am guessing it was written for the PC version of Firefox.
    The Mac OS has had a native PDF-creation functionality for as many years as I have been using it; I used PC prior to that, Win3.1 through XP and NT. And on my PC, I bought (and at work, my employer bought $$$, I had to justify three levels up to management the ability to create PDFs on my work PC) some Adobe functionality to CREATE pdf's (readin's free and easy, makin' em's costly on the PC).
    I've gone and dug through some of my (Mac) doc and clipping archives, and I find that stuff I created after about Dec 2008 or so seems to eliminate all link functionality. When viewed in the Apple native "Preview" application (sort of Apple's equivalent to Adobe Acrobat reader, ships with the OS): link tags are highlighted/tinted, clicking a link opens a (default) browser and takes you there; hover-over the tag text shows the actual link. (Of course, not all old links are still VALID or point to the desired source.)
    I could, in Safari or FF browser window and with no add-ons or Adobe paid products whatsoever, use the native OS method to create PDF's from any application (word processor, spreadsheet, browser, etc) via the menu File -> Print -> Save as PDF menu and create a PDF that had active hyperlinks. In Apple OS Lion 10.7.3, I still can't when it uses this broken WebKit interface, links are "dead" as a doornail until a fix is distributed in WebKit for a future Lion release. It seems this functionality died at least as far back as Leopard OS 10.6.8, but don't quote me on that. Also, my version of Pages 2009 version 4.1(923) (sorta like Word) STILL creates a PDF document that preserves (1) text hyper-links within the document, and (2) web links (in the PDF) that open the browser. I just made a test document.
    When all you can see in the PDF is the tag text, there is nothing to copy-paste to follow any link. Also, hypertext links are often used by authors to create links to other points in a document: now even *that* is broken in the PDF version of the documents I retrieve from the web and print from FireFox (Broken in Safari 5.1.3 and earlier but fixed in 5.1.4).
    Try this on the PC, in your browser and print a news clipping as PDF, do the links in the PDF work? What products do this, and what don't? I would bet the machine with a full Adobe suite this will work flawlessly. (Why should a PC user have to pay hundreds of $ to create this functionality in what I thought was an open standard (PDF)? But that's talkin' religion, let's not start that.)
    Some folks might say,
    go online and find the original source doc in your browser. Or,
    go and add those links manually using the Preview edit add-link capability (hunh? no thanks) , or
    save each item worth saving as an HTML archive instead of a PDF (argh, creating a whole directory in the process, I might add, including ads). Or,
    who needs PDFs, everything is online.
    Or, buy some Adobe product.
    I think they miss my point. This is a real strange dumbing-down of archival PDF documents, or at least a destruction of the ability to use PDF as an archive that retains its links and references.
    C.F. the guy who has archives of scientific papers, and the old material all cross-references nicely but after date X there are no working links.

  • How Can i retain the Shared Variable Values after PC rebooting

    Hi all,
    I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
    One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing. 
    As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
    I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
    I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
    Thanks and Regards,
    Mir

    Hi Blackperl,
    Thanks for the post and I hope your well. 
    What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after. 
    Surely a better method would be to log the data to a file during the reboot...
    I beleived the value read back
    will be the default value for the shared variable's data type.
    The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
    If you enable an initial value on a shared variable, when the variable
    engine comes back on-line it will default to this value. Setting a bad
    status alarm for the shared variable is also a good way of handling
    this type of event. Additionally, if you are using a LabVIEW Real-Time
    target such as Compact RIO or Compact FieldPoint, it is appropriate to
    consider hosting the shared variable engine on the real-time target.
    These devices have watch-dog capabilities and are typically the
    hardware controlling the critical pieces of an application. Most
    Windows or PC-based targets do not have these fail-safes.
    I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
    Please let me know what you think,
    Kind Regards,
    James.
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • How can i retain the trailing zeroes after decimal

    how can i retain the trailling zeros after decimal?
    values are showing in table like( 4.50,5.00) but i am trying to do some processing with these values then ithe zeroes are truncated like (4.5,5),
    how can i get values with zeroes

    If the values in the table have trailing zeroes, it's a character type column.
    Once you perform operations on them, they're implicitely converted to the number type, hence "losing" trailing zeroes.
    To get the trailing zeroes back, you have to convert them back to character data:
    TO_CHAR(1.5*3, '90d99')Have fun,
    K.

  • How can I retain my counter button after editing page?

    How can I retain the numberon my counter button after I have change information on my welcome page?

    Since MobileMe will be discontinued on June 12, 2012, and with it the following features:
    Features Unavailable When Publishing to a Non-Mac Server:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ RSS Feed Widget
    you might get ahead of the curve and use a 3rd party counter.  There are many counters that will give you much more than just the number of visitors and can be setup to not count your visits. I use  StatCounter which gives the following info on visitors:
    Click to view full size
    This tutorial describes how to add the counter using an HTML snippet: #13 - Adding a StatCounter as an HTML Snippet. 
    OT

  • How can i retain rss in safari mavericks

    how can i retain rss mavericks in safari

    roqmoninoff wrote:
    how can i retain rss mavericks in safari
    How can I retain RSS in Safari  ver. 7.0 with the new Mavericks OS X 10.9 ?
    This is not possible. Move on.
    You need a RSS feed reader there are many, ex: http://netnewswireapp.com/

  • How can I recover my old account with a new one?

    Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
    How can I get acces to my old account with a new Adobe ID?
    I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
    what can I do?
    Thanks

    Thanks Romshina
    I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
    now this is my new email, because the las one it was hacked and I just can't get back to it.
    So I would like to have access to my account and update this new email account, to have acces to my CC account.
    Thanks
    Date: Fri, 27 Dec 2013 06:51:15 -0800
    From: [email protected]
    To: <Removed by Moderator>
    Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
        Re: How can I recover my old account with a new one?
        created by Romsinha in Adobe Creative Cloud - View the full discussion
    Hi Guillermo Castellanos,
    Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
    Regards,
    Romit Sinha
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
    To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe Creative Cloud at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for