How can I retain resolution when cropping?

When I zoom in, the resolution is clear and crisp. However, when I crop to the same level, it becomes blurry. Perhaps it is automatically resizing, but if so, how do I turn that off?
Thanks!

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

Similar Messages

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

How can I increase resolution when saving file as PDF?

I am sending some illustrated files to a professional printing press that only accepts PDFs, however they say the resolution is too low and should be 300dpi. How can I increase resolution? Only option I could find was to try to create a new filter in Color Sync by duplicating PDFX3 filter and editing it to the desired resolution, however I couldn't get new filter to save my resolution inputs. Any help is appreciated!

You really need something like Acrobat which will install a "Save as Adobe PDF" under the PDF menu. You can select press quaility," "high quality print," etc., and get a true high res PDF.
If you'd like to just give it a shot, try downloading one of the OS X CS6 suites that include Adobe Acrobat Pro for a free 30-day trial. I've never used SketchBook Pro, but Acrobat may help you out.
Clinton

How can I retain the original quality of a photo when sending it by email.At the moment if I drag them in to the email from iphoto the image quality reduces.

When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
How can I retain the original quality.
Philip

When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
Philip, dragging from iPhoto will export previews of the image, not the original high resolution image. To export higher quality versions from iPhoto don't drag, but use "File > Export"
You can also mail your photo directly from within iPhoto using "Share > Email" and set the "Size" to "Actual Size (Full Quality)"
Regards
Léonie

How can I retain hyperlinks while saving a webpage as PDF via Print?

How can I retain hyperlinks while saving a webpage as PDF via Print?
This is the title of an apple forum question, and it is a bug in both Safari 5.1.3 and under, and I find it to also occur in Firefox browser (at least 9.* 10.*, 11.0), running on Lion OS (10.7.2, 10.7.3). See:
https://discussions.apple.com/thread/3212301?start=0&tstart=0
Under the newer Mac OS mentioned, and Firefox 10.2, 11.0, 9.*, if I select:
File -> Print -> PDF -> Open PDF in Preview"
(and view / save the PDF in Preview, you will see none of the links in the original web page are active
or using
File -> Print -> PDF -> Save as PDF...
same problem. Try this using any Wikipedia page, for example.
When this problem was posed in Apple forums, by a user of the Safari browser, it was found to be a bug (since Aug 2011) fixed in a Safari browser build 5.1.4 circa Jan 2012. I tried the newer Safari browser and sure enough the problem went away (except that links embedded in the PDF no longer appeared as blue text - ARGH - but "hover over" with the cursor showed the link and clicking the link in Preview viewer activated the link in a browser window).
So I post this to the Mozilla community, please fix this 'cause I don't want to have to switch over to Safari browser every time I want to archive a PDF with active links!!!!
P.S. I did a spot-check and with the newer add-on Enjoy Reading 1.0.1 and FF11.0. When the Enjoy reading formatted version appears in the browser window, all URLs/links are preserved and highlighted in blue, but when I print that browser window as PDF, the links are dead (don't work) even though they appear in blue in the PDF.
So, what's going on, can the Safari fix be researched and applied to FF?
Also, on some forums, people are responding, Well, try installing Acrobat reader. Well, I don't want to, Preview reader has worked fine for me for years.

Thanks jscher2000.
RE: -- '''Generally speaking, PDF converters that work by intercepting a print job do not have access to the URLs behind links in the page.''' --
I cannot say I agree. I could email you a PDF clipping or two (generated from Safari on Mac OS, in its native capability with no add-ons) that shows you otherwise. When I used PC platforms I did have to install PDF converters (tried both free and expensive ones) that did what I describe.
I cannot try the add-on you mention, '''Print Pages to Pdf.''' in Firefox. It shows in my browser and Mac OS platform "Not available for your platform." So I am guessing it was written for the PC version of Firefox.
The Mac OS has had a native PDF-creation functionality for as many years as I have been using it; I used PC prior to that, Win3.1 through XP and NT. And on my PC, I bought (and at work, my employer bought $$$, I had to justify three levels up to management the ability to create PDFs on my work PC) some Adobe functionality to CREATE pdf's (readin's free and easy, makin' em's costly on the PC).
I've gone and dug through some of my (Mac) doc and clipping archives, and I find that stuff I created after about Dec 2008 or so seems to eliminate all link functionality. When viewed in the Apple native "Preview" application (sort of Apple's equivalent to Adobe Acrobat reader, ships with the OS): link tags are highlighted/tinted, clicking a link opens a (default) browser and takes you there; hover-over the tag text shows the actual link. (Of course, not all old links are still VALID or point to the desired source.)
I could, in Safari or FF browser window and with no add-ons or Adobe paid products whatsoever, use the native OS method to create PDF's from any application (word processor, spreadsheet, browser, etc) via the menu File -> Print -> Save as PDF menu and create a PDF that had active hyperlinks. In Apple OS Lion 10.7.3, I still can't when it uses this broken WebKit interface, links are "dead" as a doornail until a fix is distributed in WebKit for a future Lion release. It seems this functionality died at least as far back as Leopard OS 10.6.8, but don't quote me on that. Also, my version of Pages 2009 version 4.1(923) (sorta like Word) STILL creates a PDF document that preserves (1) text hyper-links within the document, and (2) web links (in the PDF) that open the browser. I just made a test document.
When all you can see in the PDF is the tag text, there is nothing to copy-paste to follow any link. Also, hypertext links are often used by authors to create links to other points in a document: now even *that* is broken in the PDF version of the documents I retrieve from the web and print from FireFox (Broken in Safari 5.1.3 and earlier but fixed in 5.1.4).
Try this on the PC, in your browser and print a news clipping as PDF, do the links in the PDF work? What products do this, and what don't? I would bet the machine with a full Adobe suite this will work flawlessly. (Why should a PC user have to pay hundreds of $ to create this functionality in what I thought was an open standard (PDF)? But that's talkin' religion, let's not start that.)
Some folks might say,
go online and find the original source doc in your browser. Or,
go and add those links manually using the Preview edit add-link capability (hunh? no thanks) , or
save each item worth saving as an HTML archive instead of a PDF (argh, creating a whole directory in the process, I might add, including ads). Or,
who needs PDFs, everything is online.
Or, buy some Adobe product.
I think they miss my point. This is a real strange dumbing-down of archival PDF documents, or at least a destruction of the ability to use PDF as an archive that retains its links and references.
C.F. the guy who has archives of scientific papers, and the old material all cross-references nicely but after date X there are no working links.

How can I retain two versions of my iPad backup in iTunes?

HI,
When I backup my iPad on iTunes, the previous backup is automatically deleted and a new back is created.
How can I retain two versions of my iPad bacup in iTunes?
Thanks, Ramani

Backup the device. Immediately restore the backup. The restored backup is now archived and a new rolling backup set is created. You can repeat as needed and clear older backups from Edit > Preferences > Devices.
tt2

How Can i retain the Shared Variable Values after PC rebooting

Hi all,
I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing.
As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
Thanks and Regards,
Mir

Hi Blackperl,
Thanks for the post and I hope your well.
What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after.
Surely a better method would be to log the data to a file during the reboot...
I beleived the value read back
will be the default value for the shared variable's data type.
The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
If you enable an initial value on a shared variable, when the variable
engine comes back on-line it will default to this value. Setting a bad
status alarm for the shared variable is also a good way of handling
this type of event. Additionally, if you are using a LabVIEW Real-Time
target such as Compact RIO or Compact FieldPoint, it is appropriate to
consider hosting the shared variable engine on the real-time target.
These devices have watch-dog capabilities and are typically the
hardware controlling the critical pieces of an application. Most
Windows or PC-based targets do not have these fail-safes.
I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
Please let me know what you think,
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How can I retain my counter button after editing page?

How can I retain the numberon my counter button after I have change information on my welcome page?

Since MobileMe will be discontinued on June 12, 2012, and with it the following features:
Features Unavailable When Publishing to a Non-Mac Server:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ RSS Feed Widget
you might get ahead of the curve and use a 3rd party counter. There are many counters that will give you much more than just the number of visitors and can be setup to not count your visits. I use StatCounter which gives the following info on visitors:
Click to view full size
This tutorial describes how to add the counter using an HTML snippet: #13 - Adding a StatCounter as an HTML Snippet.
OT

On switching on, a message says 'Firefox is already running but not responding...........' then tells me to close it and restart but how can I close it when the page isn't yet displayed?

When I switch on my computer I get the desktop then I try to click on Mozilla Firefox but get the message, 'Firefox is already running but not responding. To open a new window you must first close the existing Firefox process or resart your system.' I looked up how to close but I need to click on 'file' then 'exit'. How can I do that when I can't see the page yet? IE is working fine.

See also [[Firefox is already running but is not responding]]

I am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?

i am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?

There is nothing to prevent him from downloading and installing the trial version (Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe). At the point all you need to do is provide him with the serial number so that he can activate it. If the intent is that he be the owner of the software then you might want to see about transfering the license...
Transfer an Adobe product license

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

How can i delete Record when i click on Delete Link in a report

hi,
i have to create report
select S_NO,BILL_NO,LED_NAME,PUR_LED,VAT,BILL_DATE,ST_GRP_UND,GODOWN_NAME,
ITEM_NAME,UNIT,QTY,RATE,PER,DIS,AMOUNT,'Delete' from DUMY_AC_LED_PURASEI want to delete corressponding record when i click on Delete Link.
Here S_NO is P.k.
How can i delete Record when i click on Delete Link.

Manoj,
If something does not work then you should report back on the same thread so that there is continuity to the whole episode. Be as lucid as you can be so that people know whats the scenario. E.g. is not working is not enough. What happens? Does is show error , go blank, goes to another page... all that is important.
Its for posterity, down the line others will also visit the thread (may be).
Regards,

I've lost my iPhone 4... How can I find it when the device is offline when using "find my iPhone app"????? Any way of getting a location from it????

I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????

No. It must be online in order to locate it.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

I wrote a assignment in the microsoft word 97-2003 doc but by mistake replace in the same name but with different thing . how can i retain my orinal file which was as Basel III and Banking law

i wrote a assignment of almost 2500 words in the microsoft word 97-2003 doc but by mistake replace a table only in same name . how can i retain my orinal file which was as Basel III and Banking law

Hey Christian
Thanks I havn't seen that post, busy trying it now but no luck so far.
I defined it in the second one (Content Management - Utilities - MIME Types).
Tried it now in NWA, no luck either . . .
What I noticed is no matted what it is defined as in NWA or Content Management, the properties of the mht file still shows Binary File (application/octet-stream)
Any ideas?
Regards
Antonette

We can't export as .m2ts files?? how can i retain full quality?

so we can import .m2ts files into CS4, we can edit them in CS4, but we can't export them out of CS4?
how can I retain full quality?

i see, well i have the hdr-sr12. you can export to h264 blu-ray, then do the following - NTSC, 1920x1080, framerate(mostly you would want 29.97), Field order: UPPER, Profile: HIGH, LEVEL 4.0, VBR-2-pass: 16mbps target rate with max of 18mbps. After that, export and see how it looks like on VLC or windows media player.

How can I retain resolution when cropping?

Similar Messages

Maybe you are looking for