How can I retain the attached .pdf files (displayed as icons) from my word file 2010 to a pdf file?

Hi everybody,
I have looked for an answer in this forum ... without any good result.
I worked on a Word 2010 file with some attached pdf files. These attached files are displayed as icons on the word file. If you double click on them, you can consult them. This works very good.
Problem: I would like to convert this word 2010 file into a pdf file, which keeps the icons (linked to attached files) active. If I "pdf" this with my current system, icons are displayed as pictures: I cannot open the attached files.
My question is very simple: is it possible to retain these active icons (= to open attached documents) in a pdf file? Which adobe package should I use?
Many thanks for your help 
cheers
elgreengo

No, it's not possible, but I agree it would be a very nice feature.

Similar Messages

  • How Can i retain the Shared Variable Values after PC rebooting

    Hi all,
    I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
    One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing. 
    As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
    I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
    I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
    Thanks and Regards,
    Mir

    Hi Blackperl,
    Thanks for the post and I hope your well. 
    What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after. 
    Surely a better method would be to log the data to a file during the reboot...
    I beleived the value read back
    will be the default value for the shared variable's data type.
    The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
    If you enable an initial value on a shared variable, when the variable
    engine comes back on-line it will default to this value. Setting a bad
    status alarm for the shared variable is also a good way of handling
    this type of event. Additionally, if you are using a LabVIEW Real-Time
    target such as Compact RIO or Compact FieldPoint, it is appropriate to
    consider hosting the shared variable engine on the real-time target.
    These devices have watch-dog capabilities and are typically the
    hardware controlling the critical pieces of an application. Most
    Windows or PC-based targets do not have these fail-safes.
    I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
    Please let me know what you think,
    Kind Regards,
    James.
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • How can I retain the original quality of a photo when sending it by email.At the moment if I drag them in to the email from iphoto the image quality reduces.

    When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
    How can I retain the original quality.
    Philip

    When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
    Philip, dragging from iPhoto will export previews of the image, not the original high resolution image. To export higher quality versions from iPhoto don't drag, but use "File > Export"
    You can also mail your photo directly from within iPhoto using "Share > Email" and set the "Size" to "Actual Size (Full Quality)"
    Regards
    Léonie

  • How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
    currently I am trying to verify how many users Lines are missing , Emp numbers , Phones  from AD with HR list available to me.
    I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
    these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
    Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
    any’twhenCreatedtAcctEnabled’tGroups
    Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
    Can you modify this script to help me out :)
    Hi,
    Depending on what attributes you want.
    Import-Module ActiveDirectory
    #From a txt file
    $USERS = Get-Content C:\Temp\USER-LIST.txt
    $USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    #or from a csv file
    $USERS = Import-CSV C:\Temp\USER-LIST.csv
    $USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    Regards,
    Dear
    Gautam Ji<abbr class="affil"></abbr>
    Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
    Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
    EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
    | Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
    only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
    CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

  • How can i retain the trailing zeroes after decimal

    how can i retain the trailling zeros after decimal?
    values are showing in table like( 4.50,5.00) but i am trying to do some processing with these values then ithe zeroes are truncated like (4.5,5),
    how can i get values with zeroes

    If the values in the table have trailing zeroes, it's a character type column.
    Once you perform operations on them, they're implicitely converted to the number type, hence "losing" trailing zeroes.
    To get the trailing zeroes back, you have to convert them back to character data:
    TO_CHAR(1.5*3, '90d99')Have fun,
    K.

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

  • How can we take the cursor to a different sub-screen from the BADI?

    Hi,
    We have to do some validation on Header, Operation and Relationship of any work order (IW31, IW32). We have checked that validations can be done at BADI WORKORDER_UPDATE in the method u2018AT_SAVEu2019.  But user wants us to take the Cursor back to the field and screen due to which the error is coming. How can we take the cursor to a different sub-screen from the BADI?
    Thanks in Advance,
    Pranav

    You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
    This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
    Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
    Regards,
    Barry

  • How can I print the date and time in a photo from iPhoto

    How can I print the date and time in a photo from iPhoto

    You want to print them on their own? Can't be done. WIth the photo? Install this
    http://www.iborderfx.com/iborderfx/

  • Hii, Hii, Hii how can i see the number of sms i had sent from iphone5

    Hii, Hii, Hii how can i see the number of sms i had sent from iphone5????

    Log into your carriers web site to check or use app for that carrier.  The total count will be there.
    An example: for Verizon https://itunes.apple.com/us/app/my-verizon-mobile/id416023011?mt=8

  • How can I obtain the Pages app which I previously purchased from the App store for Snow Leopard? The only download now available is for Mountain Lion which my computer can't run. Thanks

    How can I obtain the Pages app which I previously purchased from the App store for Snow Leopard? The only download now available is for Mountain Lion which my computer can't run. Thanks

    Try Amazon but look for the iWork suite of software. It's only sold separately as Pages, Keynote, and Numbers from the App Store.

  • How can I add the attachment list pdf file context to purchase order ?

    Dear all,
           I have use services for object in ME22N to attach PDF file to purchase order,I want to know how can I add the pdf file context to purchase order when I send the purchase order to vendor.
    Thanks in advance
    Best regards,
    Merry

    hi,
    attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N ) .
    Click your Service Object button -> Create -> Create attachment 
    then select your window directory ( which file you need to attach) select your file Now your system shows message  Service "Create attachment" is started. 
    Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.

  • When reading sent email, the attachments I included in the email to recipient  are not shown.  How can I retain the attachments?

    When send email with attachments and the open the sent mail to read what I sent, the attachemnts I sent are not shown on the mail in my sent folder.  How can I keep the attachments on my mail?

    It will not show anywhere; it is simply your account pic so you know you're using that particular account in Mail (if there is more than one).

  • How can I fade the first slide in a slideshow in from black?

    Novice user here, but I can't seem to find an answer to this question. I've created a couple of slideshow, and have imported them to iDVD to burn the DVDs. When I play the show in iPhoto, they're fine. But when I play a finished DVD (or the demo of the DVD in iDVD), the first slide does not fade in like iPhoto did. It's a really jarring start. I fiddled with Ken Burns effects, but all that seems to do it effect how the slide ends, not how it starts.
    How can I start the DVD slide show at black and fade the first slide in, just like iPhoto automatically did?
    BTW ... haven't upgrade to the new iLife software yet if that helps.

    Hi DogWonder!
    if it were me, I think the simplest thing to do is take a photo with the lens cover on the camera, basically a black pic. Now use this one at the beginning of your DVD/Slide Show... or even between slides for a little more drama, if you wanted...
    Good luck, Rick

  • How can we know the affected reports when i remove object from universe

    Hi All,
    If i remove any objects from the universe.
    How can i know the list of affected reports.

    Thanks for your update.
    It shows what are all the reports has been created  by using that particular universe.
    But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports)

  • How can I check the expiration date of a Certificate Keychain from terminal?

    Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
    Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
    I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
    Any recommendations would be appreciated.
    Thank you!

    Anyone?

Maybe you are looking for