How can I retain the high resolution of images saved in a PDF?

I'm using the trial version of Acrobat XI. The images are 1440dpi but always save ate 120dpi. The PDF is for the content of a picture book so I need to be able to save them at a minimum of 300dpi. Any help would be very much appreciated.

Many thanks for your reply CtDave
Unfortunately I can't find anything useful in Preferences >Convert to PDF >JPEG >Edit Settings
There are settings in Distiller that look more useful, but it appears that before they can be applied the Acrobat file has to be saved. It seems possible that it needs to be saved as a PostScript file and then converted to a PDF in Distiller, but this doesn't make any difference the way that I've (probably wrongly!) done this
.. I've changed the image in Acrobat and saved the file as .ps, but when I open the .ps file in Distiller with the new settings (Downsample Color Images: Bicubic Downsampling to 1400 pixels per inch for imahes above 1400 pixels per inch) and convert it to .pdf I find that the image is still reduced to 120dpi

Similar Messages

How can I get the best resolution for images in the pdf?

When I magnifies images on the iPad PDF mode, the image loses a lot of quality.
How I can improve them to be viewed without pixel?

stupid problem. I don't know why Adobe dosent fix it.

How can I retain the original quality of a photo when sending it by email.At the moment if I drag them in to the email from iphoto the image quality reduces.

When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
How can I retain the original quality.
Philip

When I add photos to an email by dragging them in from iphoto the quality of the photos reduce.
Philip, dragging from iPhoto will export previews of the image, not the original high resolution image. To export higher quality versions from iPhoto don't drag, but use "File > Export"
You can also mail your photo directly from within iPhoto using "Share > Email" and set the "Size" to "Actual Size (Full Quality)"
Regards
Léonie

How Can i retain the Shared Variable Values after PC rebooting

Hi all,
I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing.
As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
Thanks and Regards,
Mir

Hi Blackperl,
Thanks for the post and I hope your well.
What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after.
Surely a better method would be to log the data to a file during the reboot...
I beleived the value read back
will be the default value for the shared variable's data type.
The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
If you enable an initial value on a shared variable, when the variable
engine comes back on-line it will default to this value. Setting a bad
status alarm for the shared variable is also a good way of handling
this type of event. Additionally, if you are using a LabVIEW Real-Time
target such as Compact RIO or Compact FieldPoint, it is appropriate to
consider hosting the shared variable engine on the real-time target.
These devices have watch-dog capabilities and are typically the
hardware controlling the critical pieces of an application. Most
Windows or PC-based targets do not have these fail-safes.
I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
Please let me know what you think,
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How can i retain the trailing zeroes after decimal

how can i retain the trailling zeros after decimal?
values are showing in table like( 4.50,5.00) but i am trying to do some processing with these values then ithe zeroes are truncated like (4.5,5),
how can i get values with zeroes

If the values in the table have trailing zeroes, it's a character type column.
Once you perform operations on them, they're implicitely converted to the number type, hence "losing" trailing zeroes.
To get the trailing zeroes back, you have to convert them back to character data:
TO_CHAR(1.5*3, '90d99')Have fun,
K.

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

Hey Chunrok,
I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
I hope this helps!
Sarah Miracle
National Instruments
Attachments:
Example.vi ‏281 KB

How can I modify the High Speed Data Reader VI to show the time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
How can I modify the High Speed Data Reader VI to show the time information in x-axis?
I hope you can explain easily because I am a beginner.

Format the x axis to either absoulte or relative time.
You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
Thanks,
Naresh

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

First, I couldn't seem to find that example either on computer or on the NI sites.
The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
We're still working on a simpler way to get accurate time.
Rob

I have unchecked the box that converts my higher resolution songs to 128 kpbs downloaded to my iPod classic. How do I restore the higher resolution songs to the iPod?

I have unchecked the box that converts my higher resolution songs to 128 kpbs downloaded to my iPod classic. How do I restore the higher resolution songs to the iPod?

Uncheck the option to sync music to your iPod from under the iPod's Music configuration pane and hit Apply. After it has completed, retick the option and again hit Apply to resync all your music from your main iTunes library back to your iPod.
Or restore your iPod and start from scratch.
B-rock

Can not get the high resolution photo from iCloud on the iPhone5s, unless re-share the photo to the iCloud.

after restoring the iPhone, the iPhone can not get the high resolution photo from album of iCloud, unless re-share all the photo to the iCloud.

If you plug up both to computer, open itunes, click "back up to computer" on both (not necessary for the one that's being transferred to) then on the one that's sending data click "back up" in the iTunes menu. It will then back up (if not already done in sync). Now plug up the second one (being transferred to) and on the iTunes menu, click "restore from backup" then choose the device you just backed up, and click "ok" or what it says.
Hope this helped
P.S. I am referencing to using iTunes <11. Some features I show here might not be available in iTunes 10

How can I set the size of an image in java?

How can I set the size of an image in java? I have to choose the width and height of image...thanks to everybody...sorry for my english :-)

Hi 43477
Can you provide more details, do you want to setsize to display an image on a screen of when saving image etc?
PS.
There is a good invention called googlegoogle is good, but sometimes it's better to use more specific search, there is a search field avove on this page :)

How can i reduce the saturation of a image to make it almost transparent ?

how can i reduce the saturation of a image to make it almost transparent ?

You're talking about two different things:
"Saturation" means the amount of colour, so you would use a Hue/Saturation adjustment layer to lower the saturation to make the image (or layer) appear more "black and white".
"Transparency" is set by reducing the value of the "Opacity" in the Layers panel. If that Opacity adjustment isn't available for the layer you want to make more transparent, first double-click on the layer to change it from a "Background" layer to a regular layer.
Ken

When reading sent email, the attachments I included in the email to recipient are not shown. How can I retain the attachments?

When send email with attachments and the open the sent mail to read what I sent, the attachemnts I sent are not shown on the mail in my sent folder. How can I keep the attachments on my mail?

It will not show anywhere; it is simply your account pic so you know you're using that particular account in Mail (if there is more than one).

How do I download the full resolution JPEG images from my iPhone to my flash drive through my mac?

When I plug my iPhone 5S into my MacBook Pro through a USB 2.0 to Lightning cable, the phone doesn't show up as a device in finder (#imisssnowleopard). How can I grab the images off the phone and put the files on my flash drive? (without using the iPhoto library compression or the iTunes photo compressing) (iPhone 5S with latest iOS)(15" MacBook Pro June 2009, most recent OS X)

Use Image Capture to import the pictures wherever you want to have them.
~Lyssa

How can i convert the HTML information in XML form to a PDF?

Hi does any body know how can i convert the content of an HTML field in a XML Form in a regular text to include in a PDF in a Java program?

Hi ,
On the tool bar you have an option "Browser" which is next to "HTML Editor" .
You know that for using these elements wo have to map them with Data Schema.
Step by step
1. In data Model Under Data Schema Add a child and name it Read_More.
2. In the left hand corner ,click on tab Type and from the drop down select "rid"
3.Click on the "Browser" from the toolbar (as told earlier) and drag and drop it on the form.
4. Drag the Data schema which u have made(Read_more) and drop it on the browser on form. On right hand side u will se the mapping done.
5.Click on the "Browser" which is there in the form and on the right hand side of the form u will see the property window.
6.In property window change the value of action property to "Item Entry point"
7. Repeat step 3 and 4 in Render and show form but using "label" nad not browser.
Do not forget to add Save button in Edit Form.
This will solve your problem.
PS:Rewards Point Please.
Regards,
Naveen Gupta

How can I retain the high resolution of images saved in a PDF?

Similar Messages

Maybe you are looking for