How can i return to getting sound after pressing panic button?

I pressed the panic button after setting up my layout, and I had everything set up the way I wanted it (volume included). The volume then disappeared and no sound appears after I pressed the panic button. I've tried remapping everything but I had no luck. Please help me.

Unfortunately it does happen sometimes. I'm still trying to solve the same problem. Panic is assigned to a button on my controller and it usually works correctly, but sometimes during a live performance when I get a stuck note, the panic button kills the plugin completely. It happens mainly with Vintage B3 and E. Piano, but it has also happened with Ivory II. This never happened with MS 2. Panic is supposed to reset MDI and the audio engine, according to MS 3 help. Maybe it's a bug, or maybe my older machine isn't fast enough. I'm using a mid-2010 Mac Mini 2.6 with 16GB RAM and two 500GB 7200 rpm drives running the OSX 10.9.2 and MS 3.0.3. Any ideas, CCTM or Blueberry?

Similar Messages

  • How can I return back to OSx after installing Lion?

    I'm disappointed. After installing Lion, everything is slower. The best thing I had last year was my new MacBook Pro, because everything was fast.. (sleep, opening programs, multitasking...etc) Now, everything takes forever. How can I return back to OSx?

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

  • Getting dump after pressing save button in web interface

    Hi all!
    When i press save button in my web interface. i'm getting dump:
    The following error text was processed in the system EDW : Syntax error in program GP1ARALDY6TX0M51YNJ5FNELBCI .
    The error occurred on the application server kurmutau_EDW_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: VALUE_TO_SID_CONVERT1 of program SAPLRRSI
    Form: VALUE_TO_SID_CONVERT1 of program SAPLRRSI
    Form: VALUE_TO_SID_CONVERT of program SAPLRRSI
    Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
    Form: GET_SID of program GP5VHI3S252BZAWN36WKBAS71QH
    Form: GET_DIMID_DA of program GP5VHI3S252BZAWN36WKBAS71QH
    Form: WRITEIC of program GP5VHI3S252BZAWN36WKBAS71QH
    Form: WRITEIC of program GPEP1KAM5Q04J9717R7T5PDWE0W
    Form: APO_WRITEIC of program GPEP1KAM5Q04J9717R7T5PDWE0W
    Method: _WRITE_TO_CUBE of program CL_RSDRI_INFOCUBE=============CP
    Infocube and web interface were imported from BW3.5 system...
    How can i solve this problem?
    Thanks in advance...

    Go in ST22 and post the short dump to better ubderstand.
    Regards

  • How can I return to login screen after screensaver??

    I am trying to set up my Parents new Mac like their old Windows XP machine. When the Windows PC sat idle it went to screensaver and if the mouse was moved it returned to the login screen with their user icons.
    On the Mac the option under Security "Require password after screensaver" will bring up a password prompt for the user who is currently logged in with a "Switch User" button.
    Hitting that "Switch User" button will bring me to the login screen with the list of users and their icons. Does anyone know of a way where it will bypass prompting for a password and goto the login screen without hitting the "Switch Users" button?

    it's possible but what's wrong with hitting "switch user"? that's really the easiest. anything else will require extra work. see this link
    http://discussions.apple.com/thread.jspa?messageID=10785767&#10785767

  • How can I return all my bookmarks after reinstalling Windows?

    I have reinstalled Windows. And now I want to restore my old bookmarks. How it may be done?

    Did you make a backup of the bookmarks and possibly other personal data in the Firefox Profile Folder?
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    If you didn't do that then your bookmarks are lost.
    *http://kb.mozillazine.org/Lost_bookmarks
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • How can I make an image visible after execute a button (mouseup action)?

    My initial pdf contains a visible button, an invisible image and some code of javascipt. I would like to implement a "function" so that my button "activates (mouseup action)" the image, so the status of the image change from invisible to visible. I found only some related examples which use checkboxes instead of buttons but I can´t transfer the solution for me.
    I use Acrobat Prof. 8 and the corresponding Live Cycle Designer 8.
    Any help is much appreciated.
    Some Ideas:
    - it is possible to underlay image with javascript?
    - using different subforms, the first for the button (which set a global variable) and the second which comes up when the global variable is set?
    - etc, etc.

    Anyone?

  • 3 times loud beeping sound after press on button but never startup (mac min

    I'm having trouble startup my mac mini(not intel duo core)... i had a hard reboot (popup a grey/black on the screen asking to restart by pressing the start button) which i did hold the start button then release then press to start up... but after that, there's 3 times loud beeping sound which i've never heard before and after that screen in blank and my mac mini wont start up.. The LED light indicator is on but i'll keeping blinking 4 times every 30 seconds or so... could anyone help me to resolve the issue?
    Mac Mini   Mac OS X (10.3.9)  
    Mac Mini   Mac OS X (10.3.9)  

    Three beeps at startup indicate 'no good banks', meaning the system can't access the RAM.
    It may be that your RAM itself is bad, or that it has come unseated. It could also indicate a more serious motherboard fault which prevents the RAM being accessed, but that is unlikely.
    If you have opened the mini in the past it may be that the best way to check is to do so again and ensure the RAM is properly seated by removing it and reinserting. If you replaced the original RAM and still have the original stick, try putting that back in. Also note that Macs are typically very sensitive to RAM incompatibilities, and there have been cases where systems fail as yours appears to have done for no reason other than that a RAM stick was marginal in compatibility.
    If you upgraded the RAM yourself and bought the replacement stick from a source such as Crucial.com which permits unconditional exchanges, contact them and arrange to have the memory replaced.
    The link to the Apple page referring to the startup error beeps is at http://docs.info.apple.com/article.html?artnum=58442

  • Which trigger fires after pressing 'Save' button on toolbar.

    hi,
    I wanted to know which triggers get fired after pressing 'save' button on toolbar, and in which sequence it get's fired.

    When you press 'save' it tries to do a commit_form.
    Before commiting the form, it checks for any errors which might occur at form level, block level or item level and does the commit only when it doesn't find one.

  • How can I return to use OSX (Yosemite) after installing Windows 8.1?

    How can I return to use OSX (Yosemite) after installing Windows 8.1?
    I cannot find Boot Camp on my iMac (late 2013) with windows installed. So I downloaded it, but I cannot run it because of an error (x64...). I tried to use my USB stick with bootcamp installed but nothing. When I turn my iMac on it starts automatically with windows. I tried to search it, but I found only the setup and it doesn't work. How can I get back to my APPLE iMac? How can I use OSX?
    Excuse me for the (maybe) uncorrect language, I speak Italian.

    Hello!
    You can start your Mac up with the [alt] (sometimes [option]) key pressed and you will get the Startup Manager.

  • How can I return a app and get money back?

    How can I return a app?

    Is the app not working as described ? All purchases are considered final, so if the app is working as described then you are probably unlikely to get a refund.
    If it isn't then have you tried deleting and redownloading it via the Purchased tab in the App Store app on your phone, and if that hasn't fixed it then you've tried contacting the develeper ? If you have and haven't had a reply then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am college student and my professors require we use Turnitin however Turnitin does not support Firefox 4 how can I get it to work with Firefox 4 or how can I return to Firefox 3

    Turnitin will not work with firefox 4 how can I return to firefox 3 or how can I get firefox 4 and Turnitin in sync

    The Turnitin system requirements on mention Firefox 3. If it does not support Firefox 4 you can downgrade to Firefox 3.6
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • I made a new apple id and after that i cant get my updates from my iTunes on my pc. How can I do to get it back

    I made a new apple id and after that i cant get my updates from my iTunes on my pc. How can I do to get it back

    Sign out from the new Apple ID with iTunes on your computer and sign in with your old iTunes account with iTunes.

  • How can i return my data on my iphone 6 after restoring with another iphone user from itunes?

    I have restored my iphone 6 with another iphone instead of selecting an option "start with a new iphone" . Now all my datas have been removed and they are replaced with another iphone which was backed up previously in my itunes. My question is how can i return my previous data ?

    Restore it using a backup made of your current phone.

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

  • How can I return multiple values with PL/SQL Web Services

    Hi,
    I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
    I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
    Reginald
    ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

    Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
    It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
    {color:#ff0000}
    create or replace TYPE person AS OBJECT
    ( id_interv number,
    first_name VARCHAR2(50),
    last_name VARCHAR2(50),
    date_birth date
    );{color}
    Then your function used in your Web Service should look something like this :
    {color:#ff0000}
    function info_emp (p_empno IN VARCHAR2) RETURN person AS
    l_emp person := person(-1,'','','');
    BEGIN
    SELECT first_name
    ,last_name
    ,emp_no
    INTO l_emp.first_name
    ,l_emp.last_name
    ,l_emp.emp_no
    FROM emp
    WHERE upper(emp_no) = upper (emp_no);
    {color}
    {color:#ff0000}
    RETURN l_emp;
    EXCEPTION WHEN NO_DATA_FOUND THEN
    l_emp := person (-1,'n/a','n/a','n/a');
    RETURN l_emp ;
    END info_emp;{color}
    {color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
    &lt;first_name xsi:type="xsd:string"&gt;John&lt;/first_name&gt;
    &lt;last_name xsi:type="xsd:string"&gt;Doe&lt;/last_name&gt;
    &lt;emp_no xsi:type="xsd:string"&gt;0250193&lt;/emp_no&gt;

Maybe you are looking for