How can I reveal secret text with my mouse?

I have a potentially difficult task at hand. I will do my
best to phrase my question in a way that will describe my goal
effectively.
I have created an area within my flash website where there
are two sets of lyrics for a song. I have the first set of lyrics
visible and would only like to be able to view the second set of
“secret” lyrics by hovering my mouse (which is changed
into magnifying glass) over the lyrics.
I’ve got the drag command working for the mouse to
change into my magnifying glass artwork. I just need help revealing
the “secret” text.
THANK YOU!!!!

when I said to align the glass to center of stage, I mean the
glass SHAPE...sorry for not being clear!!
double click on your glass symbol. Highlight the whole thing,
Including the stroke. Then over to your right side, above the
Library pannel, you should have an Align tab. Make sure that the
ALIGN TO STAGE button ic checked, (this is a lone button off to the
right abit) then click on align center Horizontally, align center
Vertically.
basically, that little black cross you see on stage, that
should be in the center of your glass.
That is the "regristration point"
as for viewing your BG through the glass....I suppose you
could duplicate that magnifying glass, but make it mask your BG
instead of the text.
This is if your BG is within Flash. If your BG is HTML, then
you can't do it.

Similar Messages

How can I send a text with a picture attachment on my new iPhone5c?

How can I send a text with a picture attachment on my new iPhone5c? It won't send or recieve!!.

Does your carrier support it?
Follow the steps in this guide.
http://www.imore.com/how-send-photo-using-imessage

How can I print a text with my comments in Pages 5.0?

I have made comments on a text in Pages 5.0. How can I now print the file and have my comments included in the hardcopy?

I have found a round-about solution to my own problem: with the file open, click file, export the file back into an earlier version of Pages, save the new file and then print it, but there has to be a better solution from within the new version of Pages.

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

Olga, this is not a default feature in iPhone. You need a 3rd party application. I have created a free one, Easy Group, for group texting and group emailing.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

How can I retrieve deleted texts from iPhone 4 with 6. Software?

How can I retrieve old texts that have been deleted?

I would use a program like iExplorer to perusue your backups.
1. Search for iExplorer, download it, install it.
2. Plug in your phone
3. Click continue with Demo on the lower right
4. On the left side panel select "Browse iTunes Backups"
5. From here select the iOS device and then click Messages... now you can look through your messages..buying iExplorer will allow you to search your messages.
Also, check out DiskAid, I believe it will let you look through your backups and search may work without purchasing, just understand that both programs will have some limitation in demo mode.
Aaron

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How can i remove JUNK TEXT from APEX

Hi ,
In our project Apex has integrated with oracle apps,every time we will open apex front end from oracle application(EBS).so we have two kinds of instances 1) development and other is production
every time we export the apex application from developement instance and import in production instance . after imported into production * we got JUNK TEXT like "TEXT:TEXT" in apex front end* so how can i remove JUNK TEXT from APEX
Apex 4.0.0.00.46 version
please somebody help on this issue
Help would be appreciated
Regards
Narender B

Hi,
It is not clear what you are seeing here. Also we don't know how you have integrated Apex with EBS. My guess is you have linked an Apex page to the EBS menu and when you click on the menu link you see the additional text on the Apex page.
You need to give details of how you have integrated Apex with EBS and where and when this additional text is being displayed for me to give you any help on this issue.
Rod West

How can I create a Text-Input Field in BexAnalyzer for a Planning Function

Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advance

Hi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor

How can i plot a histogram with using the results of Line Length

PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
     JOptionPane.showMessageDialog(this,
     " Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
     "Programin kullanim detaylari",
     JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
     BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
     out.println("---Kelime Avcisinin Sonuclari---");
     String line = infile.readLine();
     while (line != null){
     int len = line.length();
     linenum++;
     line = infile.readLine();
     out.println("Line Length :"     + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
          case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
          if (start == false)
               Satirlar++;
               Kelimeler++;
               start = true;
          break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
               out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
          if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
               Rakamlar++; }
}// switch
     }//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
     out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
     out.println("Satir sayisi: "+ Satirlar);
     out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}

Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
%

How can I remove ASCII text from a field when I use it in a query

How can I remove ASCII text from a field when I use it in a query?
I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns:
SELECT FIELD1 FROM TABLE1 WHERE FIELD1 IS NULL
But the field looks empty if I do a straight select without the where clause. Additionally, one of the fields has text but appears to be padded out with ASCII text, which I need to strip out before I can use this field in a where or join statement. I have tried using a trim, ltrim, rtrim, to_char, nvl, decode and nothing works. When I use excel to run the same query it looks as if these ASCII fields are boxes.
I have asked our DBA team to see what they can do to prevent these from going into the table, but in the mean time I still need to run this report.
Do you have any suggestions?

Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel

How can i make the text bigger?

How can i make the text bigger?

1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

When using Mavericks, how can I automatically replace 'i' with 'I' when typing?

When using Mavericks, how can I automatically replace 'i' with 'I' when typing?
It was easy to do prior to mavericks using system preferences (language and text), but now I can only submit a 2 letter word to replace, not a 1 letter word. I have tried using a space but it doesn't allow that. I would assume that most people would love to be able to type quickly without having to make uppercase I all the time (first world problem i know), so I can't understand why apple have removed this feature.

There is the shift key, or text replacement approach, providing you have enabled two things:
Edit > Substitution > √ Text Replacement
System Preferences > Keyboard > TextClick + to add a replacement
Replaceii[spacebar]
With
I[spacebar]
Press return
Quit System Preferences
Now, when you type ii, you will see a pop-up offering I.
In the OS X App Store, search for WordService. This free collection of Services will enable you to just type your content, select it, and then choose the Service item, “Initial Caps of Sentences.” It does what it says.

How can I reveal secret text with my mouse?

Similar Messages

Maybe you are looking for