How can I rollback from Yosemite to Lion? I need to do this as I purchased a newer iMac and I have the old 17" iMac HD that I want to get the data migrated from. When I start the Migration Assistant it tells me that the OS X version is too old. Help!
I have purchased a newer mid 2011 iMac for my wife to replace her dead 17"iMac from 2006. It was running Snow Leopard. The new iMac has Yosemite and when I go into Migration Assistant it tells me that the OS X is too old, implying that I cannot get the data from it. How can I migrate this data to the new iMac? I have the hard drive removed and in an external enclosure connected to the new iMac.
Thanks,
Bill Stratman
Since any OS since Lion does not support Rosetta or PPC applications, you may want to check her apps for compatibility.
Have you tried to follow all the instructions here:
OS X Yosemite: Transfer your info from a computer or storage device
Also, as a general note: when you got the 2011 iMac did it have the original OS installed as required by the SLA? The seller is to remove any OS version obtained at the app store since the license is not transferable - did he do that? If not, as the OS download is tied to the Apple ID used to obtain it, you will not be able to update apps or reinstall the OS, so may I suggest you do this step now before you start porting over all the files. Use Internet Recovery: Hold Command + Option + R while restarting/rebooting until you see a spinning globe and a progress bar. After 2 - 10 minutes, you'll be connected to Apple's servers and see a Utilities window. Go to Disk Utility and choose erase your drive; once finished, go back to the window and choose to reinstall OS X. This should install a fresh original OS version which you can then update and tie to your wife's Apple ID.
Similar Messages
-
I have a very old Ipod probably 12 years old. It could be the first or second generation. I have music on it that I would like to put on my new one. I have not updated this Ipod since I purchased several computers ago. How do I put the music from this Ipod into my library. It is music from CDs I own. I really don't want to have to take all that time to redo that again. Can anyone tell me how to do this. I would like to update my library with this music and update this old Ipod with new music for use in my car. It works great and does what I need it to do so I can't see tying up my new Ipod or Iphone when I want to use it in my car. I appreciate any suggestions you can give me. Thanks
Restore them to the new computer using the bakcup of the old one. If you don't have a backup of the old computer, you can re-download music purchased from the iTunes store. If they were imported from CD's, etc. You will either have to re-rip them or purchase third party software to extract them from the phone. The iPhone is not a backup or data transfer device.
-
My i tunes account is authorized on 5 computers. However all but 1 of them has crashed or broken and I now longer have them. Due to them breaking i was not able to remove itunes from them. I have now purchased a new computer and due to the 5 limit I am unable to authorize my new one. Is there anything that I can do about this with out loosing all my purchased music? I use music for my business and it is extreamely important that I don't loose it. please HELP!!!
Use the Deauthorize All function documented in that article; while it won't delete your music, you should have a backup of it anyway.
(76771) -
Can I download music from my PC onto my new iPhone and still have my iPhone sync with my Mac without a problem?
I've had an iPod over a year and have not done much with it except download music onto it from my PC. Just recently have purchased the iPhone. When I got my iPod I didn't have a Mac, but now I do. I am really into my iPhone, so now I want to make sure that I don't do anything wrong. So can I connect my iPhone to both my PC and my Mac without it getting mixed signals and stop working. I have no music on my Mac but plan to download music into iTunes on it. So can I download music from both computers without problems onto my iPhone?StoneMountainGirl,
No. You can only music to your iPhone from one computer at a time. If you try to load music onto it from a 2nd computer, it will erase the current content on the iPhone and replace it with whats in the iTunes library you are connected to,
B-rock -
I have just purchased a new Mac and want to sync my ipod - previous computer was PC - can I recover tunes from the ipod to the Mac?
1) authorize iTunes on the new machine for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPod but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPod with it.
above covers purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
i want to change the country from USA to EGYPT in the itunes but i get a message saying, u have remaining balance which is 0.44 USD, how can i find some thing for 0.44 USD to spend this sum so i can switch my account to the right store??
Buy something for more than the balance and charge the remainder to a credit card, or write Apple and ask them to keep the balance.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
My startup disk is full?!?! This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space. I am still recieving the "Startup disk full" message. What more can I do?!?!
Did you empty the Trash?
What size hard drive & how much free space. You should always have a minimum of 10-15% or more free space?
Cheers, Tom -
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again
On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated. -
When I start up in Boot Camp it says that updates weren't properly installed and the system is reloading. It then automatically restarts in Mountain Lion. What is wrong?
I am currently using Windows 8 and also have Microsoft office installed but those are the only thing on my partitioned space. I don't know if I installed 32 or 64 version of Windows 8. Could that be the problem?Can you deal with XP not being supported by Apple and Microsoft? no security etc?
Can you use Windows in a VM instead of natively?
All the drives other than the one with XP will need to be pulled.
Always have backups of your system, clone that you can boot from.
Boot Camp 3.0 was the last supported. You don't need OEM 10.4.6 DVD and your system with EFI and SMC updates (Aug/Sept 2007) may not like it.
32-bit version of Windows on EFI-32 will only get 1.9GB RAM.
Installing 64-bit Windows 7 is a bit harder. Vista pre-SP1 64-bit was the best match for install on my 1,1 and that was 2006-2007.
The new owner needs to deal with this, not you. And really they are better off with a $400 PC instead. Or use a VM.
the owner should put in a new SSD for the system and $44 buys 4 x 2GB RAM. Together it will run just fine. 500GB SSD now $250 / $135 250GB. Biggest issue is a video card on these.
The grey screen - you upgraded the graphic card perhaps.
Unplug everything. Hit power for 5-10 seconds. Reconnect cables for mouse/kb and power, and monitor. You just reset SMC. Yes there is a small button - pull drive #4 and any controller in top slot #4 to see the SMC motherboard reset button but you don't need to.
Any PCIe cards can also play a role and factor into XP or Windows not working. -
I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?
Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?
-
I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??
Have you opened Acrobat and gone to Help>Updates to get an updated install?
-
So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
Maybe you are looking for
-
How to check if a page item is outside a page
Hi all I'm a developer tasked with doing some automation in InDesign, using scripting via .NET. As I'm a developer, I'm not really fluent in the language of layout, so please bear with me. My script creates a variable amount of TextFrame's on a page
-
"broken assets" error message when saving project as disc image
I've seen this question asked before but I've been unable to find a solution that works. I am using iDvd6. After creating my project in iMovie, I shared it with iDvd. I then added a slide show and some music. Before burning to disc I "save as disc im
-
Caching images in the client tier
Hi, I've a JSP web application with images. In that application, two HTML pages are generated. Each HTML page has the same image im.gif. Everytime a navigate from one page to the other, the image im.gif is always loaded from the web server. I would l
-
Preparing Photo Slide Show Assets
I've done short slide shows in DVDSP 3 and re-sized photo assets from 540 to 480 px to compensate for the square vs. rectangular pixel issue. I now need to do a slide show with approx. 100 digital photos, and obviously re-sizing each individually wil
-
VMS 2.2 import configs from routers setup by CSPM 3.0
Our VPN routers all have more than one Pre-shared key, one for each VPN partner router. I read that VMS 2.2 only supports one preshared key on import. How then to I setup the routers to have more than one VPN partner? Do I have to use the same presha