How can I rotate a clip?

I imported a .MOV clip and it is sideways - is there a way I can rotate it????
Thanks!

And if you don't have iMovie 8:
You can do this using TransformMovie, available here:
http://www.macupdate.com/info.php/id/21859
Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input.

Similar Messages

How can I rotate a clip, but then crop it normally?

I am trying to use Final Cut Pro X to edit a video I shot with my iPhone 4. In the video is a piece of paper. The iPhone wasn't perfectly level when I shot the video, so the paper is skewed (well, rotated) a bit.
After adding a small rotation, the paper was good to go. However, now I want to crop out all of the stuff around the paper. However, when I try to use the crop tool on the clip, the cropping lines are ALSO rotated. I don't want this.
i.e. The cropping is following the border of the clip, and so the cropping edge is also rotated. Because the focal point of the clip is not rotated properly, I don't want the cropping edge to be rotated, I want it to be straight.
Is there any way to do this in FCPX, without exporting/reimporting?

For future seachers, I would recommend using "Scale" in the "Transform" set. Since rotation is going to be around the center of the frame, anything you want to get rid of will be pretty much equal on all sides, so scale works fine for this. It also ensures that your video still fills the full frame, as Mask won't do that, it will leave black space in the bits you've masked out.
I ended up doing this as my initial thought was to rotate and then crop, but since crop comes before rotate in the processing order, you're cropping pre-rotation as ConnorN notes. But scale seems to get applied afterwards, so it works just fine. You can also keyframe it so you can keep as much of your frame as possible, much like how image stabilization works internally.

Iation. When I import it to iMovie 6.0.3 the clip is on its side. How do I rotate it 90% . You ten have to turn your head sideways to view it ! How can I rotate the orientation?

I've imported a QTPmovie 10.03 from my iphone4 in portait orientation.
When I import it to iMovie 6.0.3 the clip is on its side. How do I rotate it 90% . You then have to turn your head sideways to view it ! How can I rotate the orientation in imovie 6.0.3?

Klaus
Unfortunately, I did not have any success with this.
These pages were " not found"
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169
and
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
only opened in http://www.apple.com/
- it kept deleting /downloads/macosx/video/mpegstreamclip.html .
However, I googled and found http://tips4mac.blogspot.co.uk/2007/08/rotating-clip-in-imovie-06.html this really helpful..and it worked !
regards
BKDB

In PSE 7, how can I rotate my video, which displays sideways, to vertical?

How can I rotate my video which displays sideways to vertical in PSE 7?
It's a waterfall, I filmed it vertically, but it displays horizontally. Full Edit doesn't work on film clips and the rotate option is greyed out.
Thanks for any feedback.
Kathryn

PSE 7 is Ps Elements, not Photoshop. Try posting in the Photoshop Elements forum, as not many users here are familiar with Elements.
http://forums.adobe.com/community/photoshop_elements?view=discussions

My video was recorded on my I phone 4, the camera was held sideways for a horizontal view, but loads in I movie vertically. How can I rotate the image so it is horizontal?

My video was recorded on my I phone 4, the camera was held sideways for a horizontal view, but loads in I movie vertically. How can I rotate the image so it is horizontal?

Drag the clip from your Event to your Project. Then use the Rotate, Crop, Ken Burns Tool on the Middle Toolbar to rotate it

How can I rotate a video made on my digital camera?

How can I rotate a video clip made on my didgital camera. I appears horizontal but I want to rotate it to vertical

If you have Quicktime Pro and Quicktime Player 7 you can do it with that combination also.
OT

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can I move a clip from one movie to another

How can I move a clip from one movie to another?

If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

HOW can i rotate the loop as many lines of multi line container in BPM

Hi All
I have to send an idoc to 2 Receivers by spliting the message.
Based on the occurance of a particular source segments i need to create those many instance of targets.
IDOC ---> Rec1 (More than one message instance)
     ---> Rec2 (More than one message instance)
I have taken messages of Receiver into a multi line container1
and messages of Receiver 2 into another multi line container2.
HOW can i rotate the loop as many lines of multi line container.
Thans
Prasad

Hi Raj
There are two webservices are 2 receivers.
In the idoc there is specific segment , which occurs unbounded,Each occurence we Need to check the value of a particual field and send to corresponding Receiver.
For Ex:
ZE1KONH (1..Unbounded)
   >MSFGN =004 --> Rec1
>> MSFGN==0009 Rec2
It could be like , 1 or more segm for Rec1 and 1 or more segm for Rec2
                        all are for Rec1 or All are for Rec2.
so in the tranformation we need to put all message of Rec1 in corresponding multiline container as well for Rec2. Then i need to send to correspongind Receiver.
So here i need to send all splited messages to appropriate receivers

How can I lock a clip to storyline, timeline or song in Final Cut Pro?

My friends and I made our own version of Pharrell Williams happy video and I'm trying to edit it. The thing is that there are places where we sing and we want the song to match our lips so how can I lock the clip in place? I'm very new to editing and FCP so please write detailed directions.
Thanks =)
Here is an example of the video:
https://www.youtube.com/watch?v=kxu3w5U6fSI

Melodrama731 wrote:
... Pharrell Williams happy video and I'm trying to edit it. The thing is that there are places where we sing and we want the song to match our lips so how can I lock the clip in place?..
when it comes to 're-edit' things.. such as:
2014 FIFA World Cup on ESPN Commercial: I Believe
which 'inspired' me to do that:
http://youtu.be/du4xWTtYKVY
(the kids are my son's team)
I drag the original into the storyline
I set Markers (keyboard: m) to the original edit-points
I have the pre-selections of my material in the Events browser, set edit-mode to 'video only'/shift-2
set playhead to marker (magnetic is a good help), hit q
'fine tune' the edit (edit/colors/effects/...)
select clip and cmd-shift-arrow-down to apply final edit to the storyline
jump to next marker (ctrl-' )
That is a very fast way to 'dub' professional edits; and: I'm learning a lot, e.g. it is not only the edit-points, but the 'content' which makes a good edit 'flow' (which lacks my version) ...

How can I rotate an image in Final Cut Pro X?

I imported over a thousand pictures from iPhoto to make a slideshow of my trip to California. How can I rotate images without reimporting them?

Select the photos you want rotated, open the Inspector (command-4). In the Video section of the Inspector, hover your mouse near the Transform and click show if it's not already open. The rotation setting is in there.

How can I rotate a PDF document when viewing in adobe reader?

How can I rotate a PDF document when iewing in adobe reader?

That hardware button can actually be toggled to work either as a mute button, or a lock orientation button. This can be edited at the settings screen.

How can I separate a clip in an event in iMovie'08?

how can I separate a clip in an event in iMovie'08?

Hi iCat,
Can you provide some more information about your current implementation so that we can help to answer your questions. Some questions I have for you are:
Are you creating this project in the NI LabVIEW Web UI Builder or in LabVIEW?
How are you publishing your webservice? Is this also in LabVIEW?
How is your webservice interacting with an OPC-UA server?
How is the certification set up with OPC-UA so that you can communicate between the server and the client?
Best Regards,
Allison M.
Applications Engineer
National Instruments
ni.com/support

How can I rotate view of a pdf file, like in earlier versions?

How can I rotate view of a pdf file, like in earlier versions?

Adobe Reader Touch (Windows Store app with "Modern" UI) for Windows 8 is a relatively new product, which was introduced in December 2012. Adobe Reader XI, X, or older is a completely separate product - a traditional desktop app with classic UI. The desktop version has been available in the market for 20 years (!!) and it does not share any common components with Adobe Reader Touch.
Adobe Reader Touch does not support page (view) rotation yet.
For Windows 8, you can download and install Adobe Reader XI from the link below.
http://get.adobe.com/reader/enterprise/
For Windows RT, you can use Microsoft Reader (built-in PDF viewer), instead.

How can I rotate a clip?

Similar Messages

Maybe you are looking for