How can I run a check for a record across other records in the same dataset based on unique key constraint?

Dear community,
I have a flat data set which I run through a lookup and return. I want to check if at least one of the records matching a unique key constraint had a successful return without merging all the records. Can some one point me in the right direction?
Thanks!
Marc

Hi,
Sounds like a job for the Lookup Check processor!
As with all check processors, it adds a flag attribute (with a Y/N value) that denotes if the lookup was successful or not, as well as filtering records based on this at output.
Lookup Check does the same as Lookup and Return but does not return the record(s) looked up.
Also note that Lookup and Return does not actually merge records, but it does pull back the return data (which you can then split if you want a record for each).
Regards,
Mike

Similar Messages

  • Hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)

    hi I am attempting to use a Zed R-16 with Logic Pro 9,  how can I setup a bounce for output 17-18  this is where the mixer sums (the audio outputs on the zed come through 17-18)
    I would like to be able to quickly bounce down my mixes,  through the Zed outputs. 

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • HT201493 How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?

    How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?

    1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
    iOS and iPod: Syncing photos using iTunes
    2)
    Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Then on the iPod go to
    - Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
    - Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
    - Settings>iCloud and sign out and sign in with hers
    Contnue to use the commpn ID/account for Settings>iTunes and App stores.

  • How can i export a series of images in different aspect ratios to the same height

    How can i export a series of images in different aspect ratios to the same height?
    I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter.  I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice?  Once for long edge and once for shot edge?
    Thanks

    Yes, you can but there is a trick to it.
    In the Export Dialog under <Image Sizing> select Widdth & Height.
    Then enter 750 pixels for Height.
    Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
    When you then export all image will  have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
    Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

  • Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

    Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

    Hi SandyS_VZW,
    Yes tried resetting the wifi connection and problem still persist.
    Here it is...to make it clear. Connected thru the same wifi at home...
    -> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
    -> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
    THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
    My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
    Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
    Was there a known issue similar about this case?
    thanks,

  • How can we run MDBT transaction for non-valuated items only

    HI,
    We want to run the MDBT transaction for non-valuated items only...but through this transaction we can run for all items..
    How can we run only for non-valuated items???
    Regards,

    Dear Anil,
    MD02 - Material level planning ( Multilevel )
    MD01 - Plant level planning ( Multilevel )
    MDBT - Back ground MRP ( Multilevel )
    coming to ur query if all 20 materials belongs to one storage location or one MRP controller
    Then you perform MRP for that 20 materials with the above given user exit
    Also Plz refer my reply from this thread
    [Re: MD01 Replanification.]
    Regards
    Madhu

  • How can I enable spell checking for a text box that is just one line, e.g. subject in e-mail?

    In a prior version of Firefox I found a website somewhere that told me what to do to enable spell checking for text boxes that are just one line. I got used to being able to send an e-mail with a Subject Line that didn't have a misspelling. Now it doesn't work. Please tell me how I can enable that again. I am on a Mac using Firefox 6.0.2. Thanks!

    See:
    *http://kb.mozillazine.org/Spell_checking
    *http://kb.mozillazine.org/layout.spellcheckDefault
    You can set the pref <b>layout.spellcheckDefault</b> to <i>2</i> on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • How can I remove PERNR Check for Infotype 0009 on a new-hire create

    We have contractors working for our H.R. department setting up new-hire employees.  The workflow in PA40 includes setting up default Infotype 0009 banking information to paycheck.  The PERNR check in the workflow fails because the HR Contractor does not have an Employee Record in HCM (PERNR), therefore, it bypasses setting up the 0009 Banking Information Default.
    How can we change this work-flow so that an H.R. Contractor can setup a new hire employee with infotype 0009 banking information default?

    '''Hello peacefultrev,'''
    I believe from your question you wish to remove the window title-bar, while keeping the menu bar available.
    I have two solutions for you to try. One requires no plugin and the other requires the installation of a plugin.
    '''No plugin option:'''
    This option hides the the window title while also removing the menu bar. The menu bar can then be reactivated and viewed simply by pressing "Alt" which shows the menu bar until you click away from it. To do this:
    # Right click on the tab bar and disable "Menu Bar".
    # Whenever you which to use the menu bar, tap "Alt" on your keyboard.
    # When you click away from the menu bar the windows title will disappear until you tap "Alt" again.
    '''Plugin Option:'''
    You can download this plugin called [https://addons.mozilla.org/en-US/firefox/addon/hide-caption-titlebar-plus-sma/ Hide Caption Titlebar Plus] which can be customized to suit your needs. I cannot provide support on this plugin as I have not used it myself.
    I hope one of these solutions will suit your needs.
    Mattlem

  • I may have just downloaded something bad from a link I clicked on - how can I run a check?

    Received an email from someone I know into my hotmail account so looked ok and trusted. The email contained a link and the wording in the email stated that the person had sent me a 'hi5 notification' - to see the detail click the link.  Stupidly I did, and was then presented with the login page again requesting me to enter my password - which I did.  All I then got to see was the BBC homepage.
    I think I've been a bit dumb!  I have changed the hotmail password but am now worried I have downloaded something to my Macbook.  I don't have a virus program on my Mac as I don't emulate windows.  Any advice and is there anyway I can run a check?

    Examine this extract from The Safe Mac web site:
    http://www.thesafemac.com/mmg/
    Ciao.

  • How can u update or check for the most updated version of safari on ipad2?

    How can u check or find out if u have the most recent or updated version of safari on ur ipad2?

    I am asked to update my safari browser whenever I check my hotmail or bell mail online on my iPad 2 (only) I updated my Mac and synced my iPad, but am still getting the message. This will allow me only to view the mail messages, not read them. Does anybody have a suggestion?

  • How can I make Firefox check for the newest update of a website automatically instead of having to reload every time I go to it?

    IE Explorer has the option to check for newest version of a web page every time it is visited. With Firefox it seems I have to hit reload every time I go to an often visited web page. Is there a setting I am missing somewhere to fix this?

    # Type ''about:config'' into the location bar and press enter
    # Accept the warning message, this brigs up a list of preferences
    # In the filter box type ''check''
    # Double-click on the preference browser.cache.check_doc_frequency and change its value to 1
    For more details on this preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency

  • How can I make a complaint for an App that I bought thru the Mac App Store?

    Hello everybody, I just bought an app few minutes ago and I'm not satisfied with it.  How can I claim to receive my money back? Regards.

    Apple's policy is that all sales are final.
    Mac App Store Support -
    http://www.apple.com/support/mac/app-store/

  • How can I transfer iPhoto files from one admin user to another on the same Mac?

    i created a new admin user on my computer, so now my husband has one and so do i. how can i transfer our iphoto files from his admin user to mine as a shared file? i was able to do this with itunes easily but i am not able to do it with iphoto.

    You want to share the Library?
    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

  • How can I renumber proofs in a collection set so no two have the same number

    I have
    four or five catalogs(400 to 1000 picts in each) that need to be joined into a set to send to an online service for proofing.  How can I renumber these in lightroom so they all have a different number.doing it one by one would take forever

    thank you for your responce.  I am having trouble making the colle
    tions and the sets but once I figure that out
    i will try what you sugested.
      I may have to ask somw more questions. thanks again

  • Can I run a mxo2 mini and a BMD intensity pro on the same mac pro?

    Hi to everyone,
    I have a strange question to you: Can I run a Matrox MXO2 mini and a Blackmagic Design Intensity Pro on the same Mac Pro?
    That's because I find more versatile using a MXO2 with editing software (I have an AVID MC 5.5.3 and I don't want to update it to 6 yet) and I'd like to begin to use DaVinci Resolve from Blackmagic Design which, of course, functions only with their cards. My goal is to output Resolve to my FullHD CRT instrumental monitor without spending the money to upgrade AVID for now, I'm fine with 5.5.3.
    I won't use them togheter but alternatively as you can easily imagine.
    thanks
    best regards,
    ginuz

    The Mac Pro "Eight Core" 2.4 (Mid-2010/Westmere) is powered by dual 2.4 GHz Quad Core 45-nm Xeon E5620 (Westmere) processors with a dedicated 256k of level 2 cache for each core and 12 MB of "fully shared" level 3 cache per processor.

Maybe you are looking for