How can I run Command-line tools on my Mac?

On another thread* over in the QuickTime Community in 2007, kyc wrote
You can easily create a subrip file and convert it to scc for free using SUBRIP2SCC.
http://www.geocities.com/mcpoodle43/SCCTOOLS/DOCS/SCCTOOLS.HTML
That's exactly what I want! And it's FREE!
However, it's a(n) .EXE file. When I downloand it and double-click on it, MacOS 10.6.8's Finder says, "That's a Windows file. Are you sure?" Frankly, I'm not sure at all.
Somewhere around here I have a very old version of Parallels. I guess I could get it working again.
But can you think of another way for me to get to use this program on my machine?
--Gil
* - https://discussions.apple.com/thread/1118368?start=15&tstart=0

Bob--
Yeah, I thought so, too. But I tried your suggeston before I posted, and that's how I got here.
That Google clue points most emphatically to an Apple Support Communities thread on which kyp suggests:
You can easily create a subrip file and convert it to scc for free using SUBRIP2SCC.
http://www.geocities.com/mcpoodle43/SCCTOOLS/DOCS/SCCTOOLS.HTML
That got me excited. Now why would a contributor to this Apple discussion group refer to a webpage that can only be useful to Windowsites? So I asked here.
You're right. Surely there must be a Mac version. I'll keep looking.
And I think I'll also try a taste of Wine.
Thanks for your help, guys.
--Gil

Similar Messages

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How can I make command line interface (CLI)

Hi All,
How can I make command line interface ( CLI ) In Java using JTextArea or JTextField.
Thanks In advance..
Vikas Sahu

We do agree with your assessment and have plans to improve all of these aspects. Unfortunately, it takes a long time and a lot of work to turn "working" software into "simple to use" software, but we are working on it, and it is a high priority for us to make it simpler to use and develop for and administer Coherence.
Peace,
Cameron Purdy | Oracle Coherence

Command line tools for xcode mac os x 10.6.8

Hi,
Will the latest command line tool work for mac os x 10.6.8 also? If yes, I will go ahead and download them.
If no, please help find a download location for command line tools for mac os x 10.6.8.
Also, please let me know if that will support the development of latest ios apps.

developing for "the latest iOS Apps" is supported by the latest X-code tools, which does NOT run under 10.6.8.
Version 3.2.6 will run under 10.6.6 and later.
Version 5.0.1 requires 10.8.4 or later.
Version 6.1.1 (currently the latest) requires 10.9.4 or later.

How can I run a windows Cd on my mac?

How can I run a Windows Cd on my Mac?

Inside CrossOver Mac, Parallels Desktop, or similar products.
(67907)

How can i run word through windows on my mac

how can i run word through windows on my mac

It is difficult to understand your question. Do you want to run Word in Windows on your Mac, or do you want to run Word on your Mac?
You can install Office for Mac.
http://www.microsoft.com/mac/products
Or you can install Windows and then install Office for Windows in your Windows installation.

How to uninstall the command line tools?

I installed the command line tools in Xcode 4.5 from the preferences : downloads : command line tools.
If i want to uninstall this component, what should I do？
PS:
I saw an answer in the Apple Support Communities about how to uninstall the Xcode 4.3 and later versions.
This is the original: " If You want to uninstall completely XCode go to launchpad and push Xcode icon for two
seconds, so click on the upper left checkbox.".
I don't know what means "push Xcode icon for two seconds, so click on the upper left checkbox".

There is no easy way to uninstall the command line tools. The following article has a script to uninstall them:
You Don’t Need The Xcode “Command Line Tools”
Read the comments in the article. I have not tested the script, but this is the first result when searching Google for "xcode 4.5 uninstall command line tools".

How can i run a windows based program on mac book pro

Can I run a windows based program on mac book pro mountain lion 10.8.4

You can use bootcamp to install windows natively on the hard drive. You then choose which OS you wish to use at startup - OS X or Windows.
You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware).

How to run command line tool in my program???

Hi,all,I've got some tools that are usually,or take JDK for example,if we are not using an IDE,we need to open the command prompt,and then use the javac command to compile the source files and the "java "command to run the program,and both of them accept some command line params.The problem is that how could i integrate the tools in my own program,like JBuilder or some other IDE,you configure the params and compile and run in the IDE which don't need to open a command line prompt.Hope i have got my question clear:)
Best regards..

jesperdj ,thanks:)
actually,i am using eclipse to run my ant tasks programmatically,but I got trouble with the AntRunner class.it seems that i should config a proper classloader for it,but i just don't know how.please lend a hand:)thanks
robin

How can i run AirPort Express for both a Mac and Windows 2000 SP2?

I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4)

Hi, how can i run i real b on my mac?

hi

No apps can be opened on Mac they just sit there waiting to be syncned to your portable iOS device if you have one. Then on your portable device you can open them.
You might want to check or use Google to find out if there's a (computer application) and check system requirements for that and if compatible then you will be able to install the application and then open and run it on your computer. Or it may be web based also.

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

Running a command in a command line tool in fastest way

Before anything I want to clarify some terms :
apk
file (android application package file) : equivalent to executable (exe) files on windows
aapt.exe
: A command line tool which comes with android sdk in order to fetch information of an apk file (It obviously has other usages)
note : This question is not about an android feature. It's all about C# and functionality of .Net framework
An
apk file has a name just same as any other file, but it has a internal name (which will be shown when you install apk file on android os as name of application)
with
aapt.exe I can get internal name of an apk using following command :
aapt
d badging "<apk path>"
I
have copied aapt.exe where executable file of my c# application is and I want :
Enter
above command for each apk in selected directory (using GetAllFiles method)
I want to get internal names of apk files and
I've tried a lot of ways and I've searched a lot. finally this is what I've got :
Process proc = new Process();
proc.StartInfo.FileName = "cmd.exe";
proc.StartInfo.RedirectStandardInput = true;
proc.StartInfo.RedirectStandardOutput = true;
proc.StartInfo.UseShellExecute = false;
proc.StartInfo.StandardOutputEncoding = System.Text.Encoding.UTF8;
proc.Start();
using (StreamWriter sw = proc.StandardInput)
foreach (string path in Directories.GetAllFiles(@"E:\apk", "apk"))
sw.WriteLine("aapt d badging " + "\"" + path + "\"");
//following line doesn't work because sStandardInput is open
Debug.WriteLine(proc.StandardOutput.ReadToEnd());
// There will be a really huge amount of text (at least 20 line per sw.Writeline) and
//it impacts performance so following line is not really what I'm looking for
Debug.WriteLine(proc.StandardOutput.ReadToEnd());
GetAllFiles is
a function that I've created to fetch all apk file full path. It gets two argument. First argument is path and second one is extension of file you want its full path to be fetched.
This is not final code.
As I've commented it out first Debug.WriteLine doesn't
work and second one is not a good idea. how should I get output from proc?
I have tried running process by argument and its awful :)
As another approach :
Because apk files are basically zip files I can extract them get what I want from them.
There is an xml file named Androidmanifest.xml in every apk file.
Androidmanifest.xml is like an ID card for an apk file and apk internal name can be found in it but here are some problems with this approach :
1. Androidmanifest.xml is not a plain text file. It's coded and it requires a lot of complexity to decode it
2. application name (or apk internal name) is an attribute in this file and it's value is not a string value. It's a reference to a file where strings are stored and worst thing is it's not an easy to find out reference. It's just a number

And you don't get any output from it? Maybe you're passing the arguments incorrectly?
No. I don't get any result and I have checked arguments and it's correct.
But you are already running a separate process for every apk file. You start a single cmd.exe and then send it commands that will cause aapt to be run for every file. Unless aapt accepts multiple apk filenames on the command line there's no way
around using separate processes.
I didn't know that. anyway speed in this way is much more rather than creating a function. creating a Process object in it and calling function for each apk file.
I read somewhere that it's possible to run multiple commands in cmd by & operator but as you said I think every command runs aapt. I have tested this approach too and it's very very slow
fastest approach I have found is what I have wrote here and speed is about 0.6 per apk file which is still slow when there is thousands of apk files.
I tried an application that does same thing (fetching apk information) and in it's installation directory I found aapt.exe which means it uses this tool to get information but speed is significantly faster rather than my application.
So what's your suggestion about this?

How are Windows Server Backup and Command Line Tools used in vCSHB installation?

How are Windows Server Backup and Command Line Tools used during the installation of vCSHB? Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment? Are these tools not used in some deployments?

You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

How can I run Runtime.exec command in Java To invoke several other javas?

Dear Friends:
I met a problem when I want to use a Java program to run other java processes by Runtime.exec command,
How can I run Runtime.exec command in Java To invoke several other java processes??
see code below,
I want to use HelloHappyCall to call both HappyHoliday.java and HellowWorld.java,
[1]. main program,
package abc;
import java.util.*;
import java.io.*;
class HelloHappyCall
     public static void main(String[] args){
          try
               Runtime.getRuntime().exec("java -version");
               Runtime.getRuntime().exec("cmd /c java HelloWorld "); // here start will create a new process..
               System.out.println("Never mind abt the bach file execution...");
          catch(Exception ex)
               System.out.println("Exception occured: " + ex);
} [2]. sub 1 program
package abc;
import java.util.*;
import java.io.*;
class HelloWorld
     public static void main(String[] args){
     System.out.println("Hellow World");
} [3]. Sub 2 program:
package abc;
import java.util.*;
import java.io.*;
class HappyHoliday
     public static void main(String[] args){
     System.out.println("Happy Holiday!!");
} When I run, I got following:
Never mind abt the bach file execution...
I cannot see both Java version and Hellow World print, what is wrong??
I use eclipse3.2
Thanks a lot..

sunnymanman wrote:
Thanks,
But How can I see both programs printout
"Happy Holiday"
and
"Hello World"
??First of all, you're not even calling the Happy Holiday one. If you want it to do something, you have to invoke it.
And by the way, in your comments, you mention that in one case, a new process is created. Actually, new processes are created each time you call Runtime.exec.
Anyway, if you want the output from the processes, you read it using getInputStream from the Process class. In fact, you really should read that stream anyway (read that URL I sent you to find out why).
If you want to print that output to the screen, then do so as you'd print anything to the screen.
in notepad HelloWorld.java, I can see it is opened,
but in Java, not.I have no idea what you're saying here. It's not relevant whether a source code file is opened in Notepad, when running a program.

How can I run Command-line tools on my Mac?

Similar Messages

Maybe you are looking for