How can I run I-tune in my Windows Surface?

Reset the SMC: http://support.apple.com/kb/ht3964
Should fix just this sort of thing.

Similar Messages

How can i run wireless internet when using windows xp on my imac?

I recently installed Windows XP on my imac using Boot Camp, everything works great except the internet. ive been looking but i have found no way to get the internet to work via my wireless connection, or is it just not possible?
Could it be that i am missing some drivers? Anyone know where i can get them?
Sorry if im asking too much stuff.
Thanks in advance

Depending on the wireless base station brand and specifications,
you may have to set up the Windows system to find & use it...
Just about the same as setting up any Windows PC to go online;
except, if you have an Apple base station...
If you have an AirPort base station, there are updates for Windows
to help use that access point, from your Mac, running Windows.
An example, but not necessarily the correct answer, in the following:
• AirPort Utility 5.4.2 for Windows
http://support.apple.com/kb/DL840
Since you have posted this request in 10.5 Leopard> Automator
discussion, this won't be a suitable place to find matching replies.
see: Windows compatible technologies> Airport for Windows:
http://discussions.apple.com/forum.jspa?forumID=1014
There are other topic discussions under the Windows area,
so if you look into the main Discussions page and look into
the bottom of the listings, you can see the larger group there.
Apple Support Discussions - Forum Home:
http://discussions.apple.com/index.jspa?categoryID=1
Perhaps after reading through topics in the Windows> Airport
thread, you may wish to reconstruct and repost it in that area.
Good luck & happy computing!
{ edited to add Airport Utility info & misc explanation }

How can I run Premiere 6.0 on windows 8?

I have an old copy of Premiere 6.0 from 2000/2001 that I wish to try to install on Windows 8. It will not work even when I run the compatability settings. Is there a way around this? Windows 8 doesn't have an XP Mode either, which apparantly was the solution in Windows 7.

Hi George,
Is it Adobe Premiere 6.0 (from 2001) that you're trying to install? Then it is sadly not supported anymore even if I saw on a Microsoft website (Windows 8.1 compatibility for Adobe Premiere version 6) that version 6.5 is reported as compatible. I read also that some people manage to install Adobe CS2 on Windows 8.1, it may give you some clues.

How can I run Adobe AIR beta until my application is ready to be upgraded?

How can I run Adobe AIR beta until my application is ready to be upgraded? How can I get around being forced to upgrade? Everything was working fine until the upgrade was forced. This is a huge problem for me

You can use the Installation Tuner for Reader to customize the UI elements provided to the user. Details on the Adobe web site.

How Can I Run A SQLJ Normal Project In SAP NWDS

I have a question about SQLJ in SAP NWDS.
1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
2.I created a java normal project including the above java dictionary project.
3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
4.I coded the normal project,and export the project .jar,everything is ok.
<b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
Exception in thread "main"</b>
How Can I Run A SQLJ Normal Project In SAP NWDS?
PLS Help me and don't let me alone!

Tony,
Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
Chill out!!!
Sukanta Rudra
Note: If helpful, plz donate some points.

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How can I run 2 keynote presentations on 2 different macs with only one keyboard?

How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How can I run a vga monitor and projector together on my Mac Pro 15"??

How can I run a vga monitor and projector together on my Mac Pro OSX 15"?

You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

How can i run a java class file from shell?

Hi all,
I've a .class file named "File" that contains Main method, it is in the package "File2".
How can I run it by shell command?
PS: "java -cp . file" doesn't work it launch->
Exception in thread "main" java.lang.NoClassDefFoundError: File2/File (wrong name: File2/File)
Thanks in advance.

Just to understand: is File2 ar jar archive or not? If it is a jar archive, have you tried open File2.jar? If File2 is a directory within the current directory, have you tried java -cp . File2/File? I just tested with a set of classes and it works... Let me be precise:
* Let us imagine you are working in a directory whole path is PathToDir/
* in this directory you have the classes put in a directory called File2
* in order to launch File.class then you would have to invoke :
cd PathToDir/ (just to be sure)
java -cp . File2/File
*if you were to do the following then you would have the problem you describe
cd PathToDir/File2/
java -cp . File

How can I run a packet sniffer on a Router or Switch

I have on my network several router 1700 series and switches Catalyst 2950 and I want to know how can I run ethereal on those babies to monitore what comes and goes

The two most common methods would be (the old way) insert a hub (not a switch) in-line between the devices withthe traffic you wish to monitor or (the new way, for Cisco anyway) using port mirrroring.
A hub (not a switch) will repeat every pulse that passes on the line to the analyzer.
Since finding a new hub these days is virtually impossible (even some of the things sold as hubs are really switches), the more common way, at least in Cisco environments, is to "SPAN" (aka Port Mirroring) the port of the device whose traffic you'd like to monitor.
Here's the setup guide for a 2950:
http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swspan.html
Good Luck
Scott

How can i run a special name method of class?

i dynamic created a obj
and i don't know the method of class,
so i use a String parameter as the method's name
but how can i run the method?
please give me a copy of code, thanks!

import java.lang.reflect.Method;
public class unknown{
     public static void main(String[] args){
          unknown thisObj = new unknown();
          Class thisClass = thisObj.getClass();
          // calling the method()
          try{
               Class[] allParamatersType = {};
               Method mth = thisClass.getDeclaredMethod("method", allParamatersType);
               String returnCallingAdd = (String)mth.invoke(thisObj, null);
               System.out.println("calling add() : " + returnCallingAdd);
          catch(Exception ex){
               ex.printStackTrace();
          // calling the method(int , string)
          try{
               String firstValue = "Testing";
               Class[] allParamatersType = { firstValue.getClass() };
               Object[] values = { firstValue };
               Method mth = thisClass.getDeclaredMethod("method", allParamatersType);
               String returnCallingAdd = (String)mth.invoke(thisObj,values );
               System.out.println("calling add() : " + returnCallingAdd);
          catch(Exception ex){
               ex.printStackTrace();
     public String method(){
          return "method() called";
     public String method(String two){
          return "method(String) called";

How can I run a Flash Projector(exe) under GNU/Linux without wine?

I was received a flash on projector type(exe), there's no another swf file on there.
I'd like to ask: How can I run that on a Linux?
Thanks for reading and paying attention.

This sounds like a question for the linux distribution forum that you're using. The .exe is a stand alone executable, if you can run win32 binaries then you should be able to run this.
Thanks,
Chris

How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
Please advise...
VJ

cross posted
http://forum.java.sun.com/thread.jsp?thread=299137&forum=31&message=1184025

How can i run a jar file as EXE on mouse click..

*{color:#0000ff}how can i run a jar file as EXE on mouse click..is it possible in any way?????????{color}*

amrit_j2ee wrote:
*{color:#0000ff}how can i run a jar file as EXE on mouse click..is it possible in any way?????????{color}*Do you mean converting it from a jar file to an EXE file or do you mean that you would like to run the application by just double clicking it?
If it's the latter then you need to make the jar file including a manifest.
The manifest can be just a txt file with its content to be something like this:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: Somebody
Main-Class: NameOfTheMainClass
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildTo make the jar file including the manifest, use something like this in your command prompt (of course you must have compiled your java file(s) first):
jar cfm test.jar MANIFEST.txt NameOfTheMainClass.classAfter that you'd be able to run your application just by double clicking it.
If you're a NetBeans user, you can build your standalone application by right-clicking your project and then going to properties => run => and choosing a Main class. After that right click on that project and "Clean and Build", locate the jar file in the "dist" folder and double click it =]
Hope it helps,
LD

How can i run a jar file?

hi there
how can i run a far file on my pc. i have installed JRE 1.3.1, and set the classpath to C:\Program Files\JavaSoft\JRE\1.3.1_02\bin for the user variables, what else do i need to do to run it?

Hi everyone.. i had a funny problem. Microsoft removed from registry and system the vm and i got the problem of java.dll and the registry problem when compiling.
How did i resolve that?
too easy:
1. go to the registry and search the key "JavaSoft"
2. add a Key with the name "Java Runtime Environment"
3. select the new key and add a alfa-numeric Value with the name "CurrentVersion"
4. set the value c:\jdk1.4 //the place of your jdk-version
5. insert a new Key with the name "1.4"
6. go to the new key and add an alfanumeric value with the name "JavaHome" and put the value c:\jdk1.4\jre\lib
do this where you find the key Javasoft (in my registry was twice)
i did it and got no problems

How can I run I-tune in my Windows Surface?

Similar Messages

Maybe you are looking for