How can i run two iphone 5 sims at the same time?

I have 2 iphone 5 sim cards, one for business and one personal. Is there a way to run both on one phone? also be able to accept calls from either sim?
Thanks.
Tim

Does anyone have any experience with the Magic-sim elite? It's a strip that fits inside any iphone case as far as I can see. £24.95 in the UK.
http://www.magic-sim.com/product/id/15/MAGICSIM_ELITE_-_iPHONE_5_DUAL_SIM_ADAPTE R.html

Similar Messages

  • How can I run 2 Dreamweaver windows at the same time?

    How can I run 2 Dreamweaver windows at the same time on my
    PC?
    basically I have 2 monitors and I want to edit CSS on one
    monitor and have the html page open on the other so I can quickly
    look from one to another with in a split second instead of taking
    that extra time to switch back and forth using the tabs at the top,
    I know I should probably invest into a mac so i can work out side
    of the Dreamweaver application window and I will in the future but
    is there any way i can do this on my windows XP pro PC?
    Thank you
    Maurice

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How can I have two PDFs open at the same time next to each other?

    How can I have two PDFs open at the same time next to each other?

    Moved to Adobe Reader for iOS.
    The only way I know how to do that is with two iPads.

  • How can I maintain two tables content at the same time with SM30

    Hi all,
    I created two customizing tables that I would like to link together for maintenance in SM30. Table 1 is the header and table 2 can have multiple detail records.
    They are linked via the ID key field. I would like to run the Table Maintenance Generator on the first table in SE11 and be able to maintain both table data at the same time in SM30.
    How can I do that without any ABAP programming? Should I use Append or Include structure or else?
    Thank you for giving as much detail as possible.
    Regards,
    Sylvain

    Hi,
    You cant do it w/t abap programing.
    You can code in "EVENT" to achive the same.
    Open table maintainance generator of first table through se56 or se11.
    follow the path: environment>Modification>Event.
    Select sutaible event from drop down like Before Save... and do coding.
    In this way data will be saved in second table automatically when you save in first table.
    In case of any query, please revert.
    regards,
    Dhan

  • Hi, we have two iphones with two accounts.  The apple tv automatically syncs with one account to play music from the iphone to apple tv.  How can I use my iphone to do the same?

    Hi, we have two iphones with two accounts.  The apple tv automatically syncs with one account to play music from the iphone to apple tv.  How can I use my iphone to do the same?

    Our experience is a little different, we have different iTunes accounts for different family members, each family member has their own iTunes library on their own mac, each mac uses my Apple ID for homesharing and we are able to play purchased content from each library on the Apple TV.

  • HT1386 How can I synch my iPhone 3G on the same computer that my wife synches her iPhone 4S?

    How can I synch my iPhone 3G on the same computer that my wife uses to synch her iPhone 4S?  How can we keep our apps, contacts, calendars, etc. separate?

    You'll have to create separate user accounts to keep your iTunes libraries separate.
    How to use multiple iPods, iPads, or iPhones with one computer: http://support.apple.com/kb/HT1495

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • Can I open two Safari windows at the same time?

    Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.

    HI,
    Open a browser window in Safari. Then Command + N
    Press command and ~ or ` to toggle between the windows.
    Carolyn

  • How can i use offline & online database in the same time?

    how can i use offline & online database in the same time?
    my database in another server when the connection true it connect
    but if not does not work
    i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

    User, please tell us your Jdev version!
    There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
    If you can't connect to the db the application will not work.
    Timo

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • HT204380 Can you FaceTime two different people at the same time?

    Can you FaceTime two different people at the same time?

    No, not at this time. Feedback to Apple goes HERE, and click on the appropriate section.

  • How to insert into two differents tables at the same time

    Hi
    I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
    and I want to insert into two differents tables at the same time using one view.
    How can I do that ?
    TIA
    Edgar

    Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
    1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
    2. Create an INSTEAD OF trigger on the view.
    3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
    IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
    INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
    INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
    ELSE
    IF :NEW.deptname IS NOT NULL THEN
    UPDATE dept SET deptname = :NEW.deptname
    WHERE deptno = :NEW.deptno;
    END IF;
    IF :NEW.empname IS NOT NULL THEN
    UPDATE emp SET empname = :NEW.empname
    WHERE deptno = :NEW.deptno;
    Try something along those lines.
    null

  • Can a mac mini be set up to run two separate users at the same time?

    I work for a middle school and we need to purchase 20 computers that will just be used to run internet apps. Though we have all Macs, we don't have a big budget and for this one use only, we are condsidering purchasing inexpensive HP all-in-ones for about $450 each. However, I was wondering if a Mac Mini can be first set up with 2 partitions, install the OS on both partitions, then run two different users, with two separate monitors and keyboards, at the same time? This way, instead of purchasing 20 Windows computers, we could purchase 10 Mac Mini's (and displays) and save money, and still be supporting just one OS throughout the campus.

    If you setup a server, as in the Mac OS X Server Installation, pages 23ff show configurations, you can have multiple users, but they must all have computers.  Some installations can be done with dumb terminals but that is not what you seem to want.  Unix machines do have a multiple simultaneous user capability but you still have to have a computer for each user, again, not what you seem to want to do.  Right now there are two other users logged in on my Sun workstation on the desk behind me...they are logged in because I permit them to do so.
    And last night for an experiment I connected my iMac and MBP by ethernet wire, logged in on the iMac, then logged in on the MBP and from there on the iMac...but I set up the network to permit that and then disabled it again.  You can create security holes doing things like this.
    As dwb points out switching from Apple to PC equipment is a false economy that lures in administrators.  In our county school system we had a superintendent who hired a good friend...who had PC-industry ties.  Decided to remove all Apple equipment from the elementary schools and switch to PCs.  It wasn't long before they ended up going on a 4-year cycle of "refreshing" the equipment, i.e., completely replacing all hardware in every school on a four year cycle.  Since my wife was a Media Specialist, aka librarian, and responsible for technology in her school, every four years she had to develop a complete school map of where each teacher wanted the computers in their classrooms, complicated by where the technicians predetermined the locations of the network wire drops, of course.  then teachers get shuffled over the summer and all the plans are for naught.
    Anyway, there really isn't a solution to your problem except to buy a large number of computers and let each student use one and have them networked to a server, print server, printers, etc.  This is not inexpensive and cutting corners will only cause headaches for you.

  • How to run two vi's at the same time, one uses an AI task with 8 AI channels the other a single AI and AO channel???

    Hello Everyone,
    Here is my situation.  I have one vi that is reading an AI task of 8 channels AI0 --> AI7 (one sample on demand) and also has control of all of the digital outputs on the board.  My problem is that I want to run another vi that will use the last AI channel AI8 and an AO channel AO0.  These two vi's do not need to know anything about one another but I do need them both to be running at the same time.  Currently when I try running the two vi's together both vi's crash and I get an error message stating that the AI8 pin is reserved.  AI8 is not part of the task and is not refrenced anywere in the larger vi.  I am assuming that this problem is do to the fact that the larger vi is occupying the DAQ board, cycling through the task when the smaller vi is requesting data from AI8 and the DAQ board cannot do two things at once.  The sampling rate on the smaller vi is not really that important.  Is there anyway I can get the smaller vi to read from AI8 and not crash??? Software and Hardware listed below.  Thanks in advance for any suggestions.
    PCI-6221
    Labview 7.1 

    Hi steve ,
    Sorry to say that you cannot configure and acquire from AI channels on a   Device simultaineously from 2 seperate VI's.
    regards
    Dev

  • How can I draw two differenct plots at the same graph?

    [I am beginner]
    I have two different set of data which have differenct x-axis values. How can I draw two data at the same plot?
    For example, one data set is
    x y
    1 3.5
    3 2.3
    5 1.3
    8 3.2
    The other
    1 2.3
    2.5 5.4
    4 2.5
    If I use m_graph.plotXvsY two times. But it draw only one graph at the same time.
    Please let me know. Thank you in advance.

    Do you really need the two sets of data on the same plot or is what you really care about is that the two sets of data are in the same graph? If it's the former, then there's not much that you can do since a plot can only contain one set of data. You can append to an existing set of data by calling the corresponding Chart (for example, ChartXvsY) method, but the result is that the plot's data will appear continuous.
    If it's the latter, the way to do this is to add multiple plots to the graph and plot each set of data in a separate plot. For example, go to the Plots tab in the graph's property pages, add another plot, then here's some sample code that demonstrates how to plot the sets of data from your example above:
    double xData1[] = { 1, 3, 5, 8 };
    double yData1[] = { 3.5, 2.3, 1.3, 3.2 };
    CNiReal64Vector xDataSet1(4, xData1), yDataSet1(4, yData1);
    m_graph.Plots.Item(1).PlotXvsY(xDataSet1, yDataSet1);
    double xData2[] = { 1, 2.5, 4 };
    double yData2[] = { 2.3, 5.4, 2.5 };
    CNiReal64Vector xDataSet2(3, xData2), yDataSet2(3, yData2);
    m_graph.Plots.Item(2).PlotXvsY(xDataSet2, yDataSet2);
    Hope this helps.
    - Elton

  • Running two stepper motors at the same time from one port

    Hello,
    I have to run two motors at the same time - one used to move a linear ball screw and one to turn a grip. I am doing tension and torsion testing on small wires, but tension and torsion have to be done at the same time. I also have to build in the ability for each motor to take multiple steps, ie. have a motor take x number steps at y velocity and then move x number of steps at z velocity. Both motors need to be able to do this. However, I am having problems getting the motors to run at the same time and to take all the steps. The motors are connected to two RMS Technologies R356 controllers. Both of the controllers are then connected to one RS485 to USB converter card, and that card is connected to one of the USB ports in the computer. Currently, I pass an array of commands to two for loops each containing VISA read and writes. I've attached the vi to look at. All of the timing stuff in the code is because a new command cannot be sent to the controller before the motor is done executing the previous command. If commands are sent right after one another, the controller will only execute the first command and then return with an error. 
    Does anyone have a suggestion as to what I am doing wrong?
    Thanks in advance for any help. 
    Solved!
    Go to Solution.
    Attachments:
    Motor Controller (Sub VI 3).vi ‏41 KB

    I'm not too clear on exactly what you are trying to accomplish or some of the details.
    Are there equal number of torsion and tension steps?
    Is there a pairing between a torsion and tension?  For example, you want to tension and torsion simultaneously, but those two together make a complete step?
    Do you want to wait until both the torsion and tension have completed before moving on to the next torsion/tension pair?
    Is there any time delay you want to hold at before moving on to the next step.
    When working with state machines, it is important not only to define the states, but also the logical stepping from one state to the next, or alternatives based on conditions.  It could be flowchard, but sometimes people call them state charts.
    Right now your latest posting has goes to "Write to Motor" event though and will wait there forever because there is nothing in the queue to write out through the VISA port.
    Let's assume your first state would happen to be Enqueue Tension (in order to get something in the queue), you will actually queue up all your tension commands at once with the For loop.  Then i will be 1 less than the size of the array it always will be because for an array size n, i will go from 0 to n-1 on each iteration.  So your false case will run and you will go to "Write to Motor".  Write to Motor will run and dequeue the first command then go to Waiting for Response.  Waiting for response will iterate through the while loop until 66 or 67 comes back.  I assume only 66 will come back for tension since you have yet to write a torsion command.  Once that comes back, it will go to Enqueue Tension again and insert a whole other series of commands.  Then go back to write Motor and will take out the 2nd queue element from the first set of commands your wrote.  It will stay in a Tension mode and the Queue will grow endlessly putting in a whole new series for each element that you dequeue.
    A state machine is the way to go, but I can't really sketch one out for you because I'm not sure exactly how your applications is supposed to work.  If a tension and torsion command are paired together,  perhaps you should just queue them together and write them out at once.   But the key thing is to sketch out on paper your application and flowchart exactly how the program should progress from step to step.
    PS:  One other thing, make sure you wire the queue reference wire through all states.

Maybe you are looking for