How can i save a data in text format

how can i save a data in text format in labwindows cvi
Message Edited by Tikoy on 04-14-2010 11:30 PM
Solved!
Go to Solution.

Hi,
If your data is in an array, the easiest way is to use the ArrayToFile function.
It automatically creates a file and puts your data in it according to the format you provide.
If you have individual samples that you need to write once in a while, you can either collect them into an array and then use ArrayToFile or open a file with fopen and write them as they are acquired with fwrite.
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

Similar Messages

How can i save the data in a jpanel form to a .txt document

how can i save the data in a jpanel form to a text file using parse function,this should happen when i click a save button .
please help me..

each time when i fill the form and click save button ,all the data in the form should be written to a text file and each time when i repeat it should append to the old data in the text file.the elements in the form should be seperated by pipe delimeter.
thanks for your patience..

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

How can i save the data from the Oracle database to my local directory

How can i save the data from the Oracle database to my local directory instead Of saving the data file to the Directory created on the Oracle Server ?
I require to design the Procedure which will pull the data from various tables and needs to store the data in the Client's local directory.

Since SQL*PLUS runs on the client, you can use SQL*PLUS to spool data to your local drive.
You could also use the database to write a a specified drive where all users have access to (mapped network drive, e.g.). I wouldn't recommend doing it that way, but it is sometimes useful when the files are created in some nightly batch run.

How can i save the data's which i have entered into the table (webdynpro)

Hi,
I have created one view in that username , password fields and one button are there .
While clicking on the button how can i save that data's into the table which i have created??
Where i want to write the code??
please help me...
Thanks
Shyja

hi,
in component controller create a method save, on that read the node that containing the user name and password into itab using the code wizard.now write code to insert itab to the dbtable of ur choice. save the method and activate .
now go to ur view, create a button.. on action of that call the method in the comp_controller.
Regards
Sarath
Message was edited by:
sarath satheesan

HT1320 how can i save me data stored on a non responding ipod classic and says you need to format before using it?

how can i save me data stored on a non responding ipod classic and says you need to format before using it?
in another way : how can i save my date stored on my classic iPOD as a external hard .... when that msgs appears .... volume doesn't contain a recognized file system , make sure the file system is loaded .... then , you need to format ??? can anyone help ?

It sounds like the iPod's storage has data corruption. You may be able to treat it like an external drive and use data recovery software on it, but it probably won't work because the system is telling you that the drive needs to be formatted before it is recognized.
If the problem is data corruption and there is no hardware-related problem on the iPod's hard drive, a Restore should fix the problem. But this will obviously erase the iPod's hard drive.

Data still in mical, but was deleted via icloud in ical. How can i save my data?

still in 5.1.1, and I had general data in ical saved on my iphone but not in the icloud (which was a mistake, I didn´t notice). As I syncronised the ical data with the icloud, these general data were deleted. I guess they are still in mical, which I use, but I don´t want to open mical as it would immedeately syncronise with ical and the general data would be lost forever. Does anyone have a solution for the problem? How can I retrieve my data?
Thanks in advance

muhammad arslan wrote:
and after remote wipe can i be able to find my phone
No.

How can i save differnts data in the same file?

Hi all,
i need some help. I'm working on a project for students an th university. We have to devellop a programm for LEDs measurement so that all the measure data must be save in de same file. We have develloped the programm, but we have a big problem to save the measure in the same File.
When we do the first measure , the file must be created and the fisrt data gonna be save in this file that is correct
When wie do the second measure, the third .... measure, the programm ask us to comfirm the file or where we want save our data
We need some help, to know how we can change or devellop this programm so that, for the first measure , the file must be created and the fisrt data gonna be save in this file, the second measure the same file must be chose and from the third and more the measure data must be automatically save in this file without the programm ask to chose or to confirme a file?
I attach a part off this programmm
Thanks
Attachments:
SR830DSP19.vi ‏212 KB

Move the "File Dialog" where you open your new file out of the while loop. Only pass the refnum inside the loop.

Re: Satellite A210 - Can't boot and how can I save my data?

Hi, after installing some spyware software on my vista A210 (spysweeper) I rebooted my laptop, on the restart it went straight to the boot manager and instructs me to insert my recovery disk and follow the instructions effectively. The only options I have with this disk is to format my hard drive, it seems to indicate that it will erase everything (would that include things on my partitioned drive?).
Is there no way to start the PC in safe mode? I have tried using the F8 key, but could only get to the safe mode menu using the recovery disk to boot my machine. So when I selected start windows in safe mode it loaded the disk instead.
Does this sound like a familiar problem, if so does anyone know how I can restore last weeks settings without accessing windows?
Will I have to swallow it and format my drive, on the partition I have some photos, etc that I haven't backed up yet from a trip last week so I only want to do this as a last resort?
Would I be able to go and buy a copy of vista and fix it via the CD? My laptop came with windows vista installed but no windows disk.
Any help is much appreciated!
Thanks.

If you are not able to go in the advanced boot menu by F8 you can’t start in safe mode. This is fact.
I think the only way is to reinstall Vista.
The reason why the laptop came without installation disk is because on the HDD is on the second partition an folder called “HDDRecovery”. This folder contains the factory settings and you can restore it if you go in the advanced boot menu, repair my computer and then you can select the Toshiba recovery function.
Furthermore you always get a reminder message that you should burn this image on a DVD:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+
However, now it’s too late to burn the recovery disk.
In your case I would order a recovery disk from Toshiba directly. Then you can reinstall the notebook and the Toshiba disk contains already all drivers and tools.
Here you can order it: [https://backupmedia.toshiba.eu/landing.aspx]
If you use the Toshiba recovery disk the whole HDD will be formatted. You should backup your data before you do this.
For this you can buy an external HDD case. Remove the HDD from the notebook, put it in the case and connect it to an other PC or notebook. Then you are able to save your data.
I hope I could help you.

Re:How can we save the data without enter the mandatory fields

Hi all,
I am using Jdev11.1.2.3.0
Suppose you have a form that consists of inputTexts and some of them are required (required = true). These come from a data control
What my customer wants is two buttons: one submit button, and one save button.
The submit button behaves normally: when a required field is not entered, a validation error is shown.
The save button on the other hand, will perform a model update without complaining, even though some required fields could be empty. This would be the Save operation . the values that the user entered are saved in draf mode., but the process does not continue. It's like saving a draft version of the fields you entered, so you can continue filling in the form for example the next day.
How can i start this scenario.
How can I achieve this? can anyone help me out please.
Thanks,
G.Shilpa

Duplicate of https://forums.oracle.com/thread/2596520
Please don't post question multiple times!
Timo

How can i save the data from ALV grid to my database tables?

Hi all,
Suppose in a grid i want to edit some fields and after editing the data i want to store the refresh data to my database tables. How can i do that? what is procedure? Please tell me in details.
Thanks in Advance,
Abhijit.

Hi,
   If you are doing it with oops concept then here are the steps for that.
1) Declare DATA : er_data_changed TYPE REF TO cl_alv_changed_data_protocol,
       data_changed TYPE REF TO cl_alv_changed_data_protocol.
--For getting the row no of of the row which is edited by user
DATA : ls_mod_cell TYPE table of lvc_s_modi with header line,
lv_value TYPE lvc_value .
in your program
2) Define a class
CLASS notification DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS : handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING er_data_changed.
ENDCLASS.                    "NOTIFICATION DEFINITION
3) For that class write the implementation
CLASS notification IMPLEMENTATION.
METHOD handle_data_changed.
    PERFORM handle_data_changed USING er_data_changed.
ENDMETHOD.                    "handle_data_changed
ENDCLASS.                    "NOTIFICATION IMPLEMENTATION
4) In the PERFORM handle_data_changed you code like this
FORM handle_data_changed USING er_data_changed type ref TO
cl_alv_changed_data_protocol.
SORT er_data_changed->mt_mod_cells BY row_id .
LOOP AT er_data_changed->mt_mod_cells
INTO ls_mod_cell .
append ls_mod_cell.
ENDLOOP.
*LS_MOD_CELL will have all the rows which were edited
and all the updated data corresponding to those rows*
You can now use the the data which is in LS_MOD_CELL
to update into your DB Table.
LOOP at ls_mod_cell.
READ TABLE itab3 INTO t_output INDEX ls_mod_cell-row_id.
ENDLOOP.
ENDFORM.                    " handle_data_changed
Regards,
Syed

How can I save/write data on the hard disc of the Real-Time System?

I would like to acquire huge size of data via LabView Real-Time System.
Since data is so huge, I am now thinking that it might be good idea to
write/save data on the hard disc of the Real-Time System first and then
transfer the data file to a data processing PC using FTP etc.
If you know how to save/write data on the hard disc of the Real-Time System
(Ver. 7.1), please let me know.
Thanks,

Just to add to Aitortxo's good answer,
Since you have only one Drive ( C:\) on your RT, just keep monitering the availible disc space.
After every few set of file writes keep transferring Backups delete these files, so that you keep C:\ drive space for running your applications.
Regards

How can I save my data and be back to normal operation.

Hello everyone,
I'm using P7 with Oracle XE on a stand alone computer, I am unable to connect to my Primavera DB, the issue started when my computer slowed down and i just restarted it...while disc checking computer delet some of the file. may be this is the reason.
I didnt loss my login name and pasword as this is standard as "ADMIN" after restarting the computer when i tried to login Primavera with same admin as lagin name and password this message is appear "Unable to connect to the database. Would you like to configure the database connection now?"
What is the best and the safest way to get back to normal situation where I can have all my data back, could anyone please help me? How to I back it up and restore to normal?
Thanks in advance.

You will be configuring the connection, it shouldnt mess with the database at all. You are making sure the connection between P6 and the database is setup correctly. When you click on the elipses (...) next to database on the log in screen, does it show anything under "Details"?
That being said there will be a way to backup/copy the database using the database utility not P6. With SQL it is fairly easy so I assume in Oracle it should be too. The database tool wont be application specific so you will need to look at the Oracle database documentation. For SQL it can be as simple as highlighting the P6 database (PMDB) and running the backup tool. You end result is a .mdf and .ldf which are your backup files. Don't know what Oracle's will look like.
Hope this helps.

How can I save first data before data logging in a regular period?

Hi,
I need some help to see what's wrong with my VI. I want to save the first data when I launch my VI until reach the first minute, after I want save data minute by minute, but in this fisrt period my VI does't save this data in the .lvm file.
Could someone help me?
Thanks.
Attachments:
savefirstdata.vi ‏76 KB

Thanks MoReese, but I can't open again. Well, I think I figured out what you have said last post and it worked fine, I will attach the new VI. So, I got another question right now. Why when data acquisiton has start collecting data with timestamp after some time it's incremented 1 second in the time stamp inside the lvm file or same in txt file? I'll attach the file to exemplify.
Thanks for the responses.
Diego
Attachments:
savefirstdata3.vi ‏53 KB
incrementsecond.png ‏19 KB

How can I save temporary data in Server?

Hi all,
I need to save some data in server and share to many users. I cannot save them in cookie, session. because they are in client and cannot be shared to each other. The only methed I found is save them to database, but for some temporary and often changed data that may be a bad idea. Can I just save them in the memory of Server?
Thanks.
Edited by: cn1h on Sep 7, 2009 5:55 AM
Edited by: cn1h on Sep 7, 2009 5:56 AM

The session attributes, request attribues/parameters and so on are also stored in server's memory. So please don't think that the server's memory is ultimately the application scope. It's just the JVM heap memory where all Java variables/references are stored.

How can i save a data in text format

Similar Messages

Maybe you are looking for