How can I save finished and shared movies from old iMovieHD-projects

Hi there, I have a big problem:
I have found some old iMovieHD 6 Projects. (.iMovieProject) that already have been finished years ago.
Now I would like to save the finished movies outside the projects but I can't find a way to do this although I've been searching in the www for hours.
When I go to the folder 'shared movies' I find a small .mov file - it's only some KB big.
I can start this and the movie plays with no problem im QuickTime Player 7, the quality ist quite ok - original films were .DV from a camcorder.
When I use iDVD I can take this movie without problems and burn it as DVD or .img on my hard disk.
In this .img I can find the folder VIDEO-TS where I can find the movie al .VOB. But the Quality is really awful.
How can I save the finished movie right out of the folder 'shared movies' in the best quality, maybe as .mov or other ?
I can't install iMovieHD 6.0.3 because my old iLive install-DVD was sold with my old macbook years ago and I don't know if it would work  anyway on Mavericks 10.9.5
Now I have iMovie 10 and 11. Importing the old projects would not solve the problem because only the original clips were imported, not the project itself.
Would be QuickTime Pro a solution ? There are items like 'save as' or 'export' but I don't know if it works with this kind of files...

Save the clips as Quicktime files (full quality), then you can import them into later versions of iMovie. An iMovie 6 project would not be compatible with recent versions of iMovie.

Similar Messages

  • How can i save music and pictures so all users can access them?

    how can i save music and pictures so all users can access them?

    Hi, this should be your answer as for sharing music. For photos though, I would assume you can do the same thing. Hope it helps!
    http://support.apple.com/kb/ht1203

  • How can i do to upload my movies from the ipad to the i cloud?

    How can i do to upload my movies from the ipad to the i cloud?

    If these are videos taken with your iPad, you can only add them to iCloud by adding them to a shared stream, as discussed here: http://help.apple.com/icloud/#/mmc0cd7e99.
    If these were movies purchased from the iTunes store, they are already in iCloud and can be redownloaded again in many countries for free as long as the movie is still available and the studio allows it.  See http://support.apple.com/kb/HT2519 and iTunes in the cloud availability by country here: http://support.apple.com/kb/HT5085.
    To be safe, import them to your iTunes library so you know you have them.  To do this, connect your iPad to your computer, open iTuens and go to File>Devices>Transfer Purchases.  Then you can sync them back to your iPad later if you ever need to.

  • How can i access my home shared videos from my iPad2 if I now have iTunes match?

    how can i access my home shared videos from my iPad2 if I now have iTunes match?

    That's exactly what I meant, but for some reason Home Sharing stopped working on my iPad2 once I activated iTunes Match.
    Since then, I waited for iTunes Match to finish setting up and scanning my iTunes library on my MacBook Pro and I restarted my iPad2. Both Home Sharing and iTunes Match are now up and running smoothly!
    Thanks for the reply!

  • How can I save the .mp4 files downloaded from internet to ipad memory so that I don't have to download everytime to view them again

    How can I save the .mp4 files downloaded from internet to ipad memory so that I don't have to download everytime to view them again. Also they might remove them from internet so I can't rely on the bookmark to them.

    I'm trying to send home movies to my 10 year old nephew who lives across the country. He doesn't have a computer. He has an iPod touch. His parents have computers. But I don't want everything I ever try to have him do result in "you need your parent's computer for this." It's getting really embarrassing. I have converted my family over to Apple computers but now they want to buy iPhones, iPads, and iPods even though I tell them to go Android. It took a decade to convert them away from windows now I'm trying to keep them away from these freedom limited iOS devices and they won't listen. Then it becomes my responsibility to make their iPads print to their fancy pre-airprint color laser jet printers, get home movies onto them, and countless other things. It's driving me nuts.
    I have converted these files to a format that the iOS devices will play directly off of dropbox. Now, how do I get the infernal devices to save it instead of play it?

  • My apple id is set on France app. Store, how can I buy or rent a movie from the American store??!

    My apple id is set on France app. Store, how can I buy or rent a movie from the American store??!

    You are very welcome.  I lived in France for a couple years and wish I could buy books from the French bookstore but cannot so am very familiar with this issue.
    Part of the problem is concerned with international copyright laws.

  • How can I stop the iWeb welcome movie from appearing

    How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
    Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
    Who knows these tricks?

    iPhoto seems to be viewing the iPod as a camera.  Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
    OT

  • I have 2 Macs - an iMac that holds my entire iPhoto library and a Mac Book Pro that I use to hold a subset of the main library - how can I transfer photos and their metadata from the main library of the iMac to my Mac Book?

    I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?

    Link the two Macs together and use iPhoto Library Manager
    Regards
    TD

  • When I try using Airplay to stream from Amazon Prime it tries to use Apple TV music.  How can I get it it stream movies from Amazon Prime?

    When I try using Airplay to stream from Amazon Prime it tries to use Apple TV music.  How can I get it it stream movies from Amazon Prime?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • My iPhone 5S drowned in a rainstorm. How can I retrieve contacts and text messages from iCloud backup onto my iPad mini?

    My iPhone 5S drowned in a rainstorm. How can I retrieve contacts and text messages from iCloud backup onto my iPad mini? There are some contacts on the iPad already but nowhere near all of them. I need to re-enter the contacts manually into an iPhone 4 as it does not support iOS 8.

    Let me get this straight.....You lost your phone.  You never backed it up, either to your computer or to a cloud service.
    How in the world would you expect to get data back?

  • How can I save a "trimmed" QuickTime movie at original high rez?

    I use QuickTime 10.1
    In the past, after lobbing off part of a QT movie using the "Trim" function, I was never asked what quality to save it in, it just saved when I clicked Save. I never imagined I was losing quality by saving a trimmed movie.
    Now, however, when I click Save a window pops up giving me two choices: 480p or 720p. Are we to assume the movie we're working on was no greater resolution than 720 to start with? Or is our movie being condensed against our will?
    A test suggests the latter is true. Even if I lob off just a teensy bit, a file saved at 720p is VASTLY reduced in size. What is going on here, and how can I save my movies at the same high quality they start out with? I find nothing in Help about this.
    Secondly, if I may slip this less important question in as well: Sometimes when I click Save I get an error message that "This operation cannot be completed," and QT crashes. This has happened a number of times, and I can't see that I'm doing anything wrong. Any clues?
    Many thanks.

    In the past, after lobbing off part of a QT movie using the "Trim" function, I was never asked what quality to save it in, it just saved when I clicked Save. I never imagined I was losing quality by saving a trimmed movie.
    Are you referring to a previous version of QT or your current v10.1 Lion version? Since the introduction of Snow Leopard and QT X v10.0, Apple has been moving towards a single combined "Save", "Save As...", and "Export" function with the name shifting from "Save" to "Export" as it evolved. (I.e., in the latest Mountain Lion rendering you are advised to read the "pop-up" option description to tell if you are performing a "Save/Save As..." or an "Export" action.)
    Now, however, when I click Save a window pops up giving me two choices: 480p or 720p. Are we to assume the movie we're working on was no greater resolution than 720 to start with? Or is our movie being condensed against our will?
    Since you have not indicated the encoded or anamorphic dimensions for the file you are working on, it is difficult to determine if the QT X player is acting normally or not here. Basically, whatever you are doing is triggering an export action which limits the dimensions to specific category levels. You cannot, for instance, export a 1280x544 (2.35:1) aspect file to a 1920x816 (2.35:1) aspect file but you can export it to a 720p 2.35:1 aspect file because it woud fit within the 1280x720 defined 720p dimension window. I.e., unlike QT 7 Pro, the application will not let you "upscale" the source file during the encode since this would reduce export quality and is the same as exporting the file at its current dimensions and simply rescaling the playback dimensions—a much faster workflow. As to "being condensed against our will," this could be the case in some instances. For instance, a 1280x720p30 file might be re-compressed to a 960x540p30 file for mobile device compatibility which, in turn, usually depends on the specific method of accessing the export action.
    A test suggests the latter is true. Even if I lob off just a teensy bit, a file saved at 720p is VASTLY reduced in size. What is going on here, and how can I save my movies at the same high quality they start out with? I find nothing in Help about this.
    If you are referring the to QT 7 Pro "Save As..." workflow and you still have your QT 7 Pro registration key, then the obvious answer would be to install the QT 7 v7.6.6 Player and key it for "Pro" use. Both QT players can be installed and used under OS X v10.6, v10.7, or v10.8 simultaneously. (I.e., by default QT X installs and runs/updates in "Applications" folder while QT 7 Pro installs and runs/updates from within the "Applications/Utilities" folder where they should be left.
    Secondly, if I may slip this less important question in as well: Sometimes when I click Save I get an error message that "This operation cannot be completed," and QT crashes. This has happened a number of times, and I can't see that I'm doing anything wrong. Any clues?
    This would be more difficult to answer. Since QT X is a product "in development" and has proven to be less stable than QT 7 Pro and includes far fewer editing features, I, for one, do not use it for any serious edits no matter how minor they may be. On the other hand, I have no real problems with its playback and conversion features as long as I work within the application's intrinsic limitations as it continues to evolve.

  • How can I save photos on my ipad3 from emails and Facebook. Since downloading iOS6 I am not offered SAVE PHOTO only DONE? Help me please.

    How can I save photos on my ipad3 since downloading iOS6 I do not get SAVE PHOTO option only DONE. Please don't be too technical I am74 and really only use my ipad for photos and emails

    If the photos that you are wanting to delete are also in your Camera Roll then you can delete them from the camera roll

  • How can i subtract budget and actuals amount from gl_balances in discoverer

    I have a problem with a discoverer report.
    The table is GL_BALANCES (Financials), and i tried to subtract data of current year and last year, same month, or data from actuals and budgets amounts.
    Data from actuals have the "A" code in the ACTUAL_FLAG field, and budgets amounts have a "B" code. I construct a cross-tab report with ACTUAL_FLAG field in the "X" axis and the accounts segments in the "Y" axis (From GL_CODE_COMBINATIONS). The problem is: How can i substract budget and actuals amounts? Is the same field but differents columns in report.
    I cannot use analytics function because the version of database does not support that .
    Somebody told me: "...You need to construct a custom folder to handle this..."
    I don't want to finish the reports in Excel...
    Thanks.

    Hi Miguel
    You can either create a database view or custom folder to do this using aliases for the two joins to the same table.
    For example, you need something like this in the body of the SQL:
    select
    act.code_combination_id,
    nvl(act.period_net_dr,0) actual_net,
    nvl(bgt.period_net_dt,0) budget_net,
    nvl(bgt.period_net_dt,0) - nvl(act.period_net_dr,0) diff,
    act.period_name
    from
    gl_balances act,
    gl_balances bgt
    where
    act.set_of_books_id = bgt.set_of_books_id and
    act.code_combination_id = bgt.code_combination_id and
    act.period_name = bgt.period_name
    Of course you will still need to add your own joins to get the code combinations but I trust you get the gist.
    Hope this helps
    Regards
    Michael

  • How can I stop thumbnails and keyword tags from rapid movement?

    PSE 10 for Mac: When going through catalog thumbnails or trying to locate a particular keyword tag, the images or the tags just whiz by rapidly.  How can I prevent this?  Thank you.

    I think even using Get Info may not reveal the change, though it is possible the behaviour has altered since I last tested it. Playing or updating the tracks location in a script such as UpdateTagInfo seems to get iTunes to re-evaluate the tag.
    Assuming WMP is involved it may be best to make the necessary settings adjustments to prevent further changes, use the script to get all of the background changes exposed within iTunes, then correct as you see fit. Alternatively I do have another script called ExportImport that could be used to back up the current state of your tags (you should temporarily rename the media folder during the export phase), after which you would then run UpdateTagInfo and then use ExplortImport in its import mode to restore the corrupted data.
    tt2

  • How can I remove red and green lines from a footage?

    I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

    @Ann Benns
    I will try to do that. Thank you!
    @Bill Hunt
    Well, the raw footage is an avi filmed with a handycam. This error occurred
    the next day after I finished the editing in Adobe Premiere cs5. It might
    be something wrong with the title graphics that I use, but still if there's
    a solution I would like to find it out as this error occurred before.
    Cristina

Maybe you are looking for