How can I save verbose booting message?

I know I've got a couple of [FAIL]s when booting my system. I'd like to be able to save verbose info (not just FAIL) as a text file somewhere on my filesystem for review (obviously, I don't have enough time during system booting)
How can I do that?

It's about as improper as it can be
UUID= swap swap defaults 0 0
PS.:
[warnec@chakra-desktop ~]$ sudo fdisk -lu
Hasło:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000001
Device Boot Start End Blocks Id System
/dev/sda1 * 63 42078959 21039448+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 42079084 625121279 291521098 f W95 Ext'd (LBA)
/dev/sda5 42090363 125981729 41945683+ 7 HPFS/NTFS
/dev/sda6 147072303 594004319 223466008+ 7 HPFS/NTFS
/dev/sda7 594019503 617088779 11534638+ 83 Linux
/dev/sda8 125981793 136472174 5245191 83 Linux
/dev/sda9 136472238 147059009 5293386 83 Linux
/dev/sda10 617088843 625121279 4016218+ 82 Linux swap / Solaris
Partition table entries are not in disk order
[warnec@chakra-desktop ~]$

Similar Messages

How can i save text/multimedia messages to my sim?

I'm currently using 6085 phone.
How can i save text/multimedia messages to my sim?
Now I'm not able to see my incoming messages in SIM messages instead I'm getting this in my phone memory.
Let me know the settings to be done to get all the new messages direcly to SIM.
Thanks for the help :-)
Regards,
Senthil.

You can't (if you have an S60 based phone; and even with others, only SMS can go to the SIM).

How can i save the error message?

In the execution of the integration process, and i get
the mapping error as follow:
RuntimeException in Message-Mapping transformation: Exception:[java.lang.IllegalArgumentException: Cannot cast to float. ] in class com.sap.aii.mappingtool.flib3.Stat method sum[com.sap.aii.mappingtool.flib3.Plainer@dddd08]
Now what i want is to save this message.
How can i save this message?
Thank you for your advise and reading

Hi,
An exception name is just any string, like, "timeout"
You usually have a control step, which waits for somethime (say a minute) and then transfers the control to exception handler, who handles the exception.
but i dont know from where i get the exception?
It not required for us to know from where the exception is raised as long as you have created an exception handler.
The integration process, will search for the required exception handler and execute it. Make sure, that the exception handler is in one of the branches of the block.
Hope this helps.
Regards,
Smitha.

How can I save my text messages on computer

I am new to Apple products. How do I save all my important text messages somewhere else other than iCloud? I would like to set up a file on my PC.

search google for an app to install on your computer that will download them.

HT1296 How can I save my txt messages on to my iphone4?

I have restored my info to my iphone 4 from my 3gs for the first time but my txt messages hav not come across. How can I get them?

http://support.apple.com/kb/HT1766 message is included in the backup.
Restore your phone from your 3GS backup.

How can i save sent sms messages C5-00

I cant see any sent sms messages on my phone. How do I set this up?

They should be stored locally on the phone in the Sent folder (Mail, scroll down past inboxes, select Account, see Sent folder). But that's all.
IMAP is really a better setup than POP if you are accessing from multiple places, but if IMAP isn't possible, the usual approach is to tell the phone to BCC you on all your sent mail (Settings, Mail, scroll down past the Accounts, tap ON for "always BCC myself").

How can I save my voicemail messages to my MacBook?

I thought the heading said it all but anyway. I'd like to know how to export my voicemail messages to my MacBook Pro for future incidents such as court appearances et al. There must me a simple way to do it thru an app.

http://www.ecamm.com/mac/phoneview/

How can I save an email as plain text when the save as is greyed out?

How can I save an email message as a plain text document if the saved as command is greyed out? I am using OSX Mountain Lion. Macbook Pro thanks.

OK, but is it happening to you with all messages or just some messages? If just some, can you characterize which ones? (Maybe messages with only one "alternative*" form, or with the "wrong" alternative for displayed, or messages containng images but no text?)
* By "alternative" form, I mean in the sense of Mail > View > Message > Previous Alternative or Next Alternative or Plain Text Alternaive or Best Alternative.)
Similarly, can you characterize the circumstances under which you cannot save an attachment?

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

How can I save text messages to my Mac and will that reduce "Other" in storage?

I have hundreds (or more) of text messages on my iPhone 5 that for personal reasons, I want to save. There are far too many to do screenshots. I want to save them to my MacBook Pro Retina in a readable and printable format. The reason is that I read that text messages can cause the "Other" storage to be higher. My "Other" is over 6 GB on a 16 GB iphone. Therefore I want to save texts, print them, and delete from phone.
First question: Is it true that text messages contribute to the size of "Other"?
Second question: How can I save texts to Mac in readable format so they could be printed?
Third question: How in the world do I delete all these texts from my iPhone efficiently? Is there a way to "mass delete"?
When you are answering this, perhaps it is noteworthy that:
(a) I've had an iPhone since a 3G in 2009, and the texts I want to save have been accumulating since then.
(b) My "Other" has gradually gotten larger over the years.
(c) I sync with itunes regularly.
(d) I've never had any problems with an iphone or with my data.
(e) I've restored from backup only three times, when I upgraded to the iphone 4, 4S, and 5.
I want to get this "Other" cleared up before I upgrade to the iphone 5S.
Thank you.

You can select to export a folder to save as a .mbox file. This file would need to be imported if you wanted to view the messages.
Select mailbox (folder)
Under Mailbox in the Menu bar select Export Mailbox...
You might also want to check out the demo for EagleFiler by the author for SpamSieve. You could view and search the messages archived in EagleFiler.
http://c-command.com/eaglefiler/
Regarding Mail being slow....
Is it only Mail that is slow? How much free space on your drive? Use Disk Utility to find available space.

How can I save a ringtone to my iphone that was sent in a text message?

How can I save a ringtone to my iphone that was sent in a text message?

You cannot, as far as I know.
You would need to send t to your computer, then put it in itunes and sync it.

I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the adresses and all my messages (copy and past in new Thunderbird after install)

I need to reinstall my Linux Mint 17 mate, therfore also Thunderbird. How can I save the adresses and all my messages (copy and past in new Thunderbird after install)?

Thank you for your suggestion. I have installed Linux Mint 17.1 with the Thunderbird and everything I had installed was still there. So, I didn´t need these mesures.
Thanks anyway.

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

How can I save files from disc recovery mode?

My Imac wont boot - disc recovery wants me to save files before reloading OSX - how can I save them?. I have a new external hard drive to plug in.
I have tried safe start and resetting PRAM, neither work . I am in disc recovery mode and disc repair cannot fix my hard drive and is telling me to back up my files. How can I do this from this situation?

If you have another mac available start your imac in Target Disk Mode and backup your files that way. OS X Mountain Lion: Transfer files between two computers using target disk mode

How can I save verbose booting message?

Similar Messages

Maybe you are looking for