How can I scale a wallpaper in ios7?

I can't scale a Photo to use it as a wallpaper in iPad 3G, Can anyone help me?

Hi Andres,
Here is an attempt to download: scaling.zip - Box
Is it your goal?

Similar Messages

  • How can i use panaroma wallpaper in iphone4 in ios7.1

    how can i use panaroma wallpaper in iphone4 in ios7.1

    Sorry, removed from the public release of iOS 7.0. Was only in the Beta version.

  • How can i retrieve my wallpaper image?  It is not in my photos.  I deleted the picture from my photo's because i had the original file on my desktop.  Then mydesktop was stolen and this is my only chance of recovery.

    How can I retreive my wallpaper image?  It is not in my photos.  I deleted it from my iphone because i had a copy on my desktop.  Then my desktop was stolen and now the only image i have is on the iphone wallpaper.

    My problem is the backup is lost too, because the computer that contain the backup was lost with the original photo.  It seems to me that the image is stored on the phone in some type of memory.  I'm willing to destroy the phone in order to retrieve the image.  Any thoughts on where or how the wallpaper is stored on the phone itself?

  • How can i restore a iPhone 4s (ios7) with a back from from a iphone5 (ios8.1.1?)

    how can i restore a iPhone 4s (ios7) with a backup from from a iphone5 (ios8.1.1)?
    When I try Easing All Content and Restore. It backup's to ios7. Then I'm unable to install the backup that i have in the cloud.
    Help!

    Are you sure it's a 4S and not a 4?
    You can't restore a backup made with a newer version of iOS to a phone running an older one. You must update the phone to the newer version of iOS, wipe it again, then restore the backup.
    ~Lyssa

  • HT1222 How can i resume the download of ios7 while im still connected to the wifi

    How can i resume the download of ios7 while im still connected to the wifi

    Don't think so. At least during my wife's upgrade, she did over the air and we had to wait until it finished, to avoid any further issues. There was no "Cancel" button and I didn't want to spend much more time trying to fix it after turning the phone off...

  • How can I downgrade from ios8 to ios7 on my iphone 4s?

    Hi all
    I'm using an iPhone 4s, model MD241C/A,
    Running ios 8.1.1.
    Phone is now buggy in nearly all respects: glacial pace opening and running multiple apps, most apps crash without warning, battery (brand new) lasts about 4 hours w/ normal use, battery on standby drains in about 8 hours.
    I have deleted all non-essential apps, reset factory settings, have 6GB free.
    This new ios reminds me of windows ...
    How can I reinstall ios 7 or lower?
    Thanks, everyone.

    Hi Lawrence,
    I have deleted all non-essential apps, reset factory settings, turned off background refresh in all apps, turned off display auto-brightness, deleted several gigs of photos just to give the OS some breathing room. This was to try to address the battery issues.
    I have not addressed the apps as they all used to function reasonably well w/ ios7.
    Thanks

  • How can i set my wallpaper in Lumina 920

    How can i set image as my wallpaper in Lumina 920. Please help me !

    Hello,
    Here's a direct link to the
    Windows Phone forums on the Microsoft Community forums.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Not enough space for iOS8 how can I upgrade from 6 to iOS7.2

    How can I upgrade to iOS7.2 now that iOS8 is out. I can't go straight to iOS8 due to lack of space (8Gb machine). Looked elsewhaere but it is not clear how to force an upgrade to a none current version of the OS. Help gratefully received.

    You will not be able to update to 7.1.2. That version is no longer supported for your device. The only option available to you is 8.
    You're best bet is to update the phone via iTunes on a computer. This will keep the need to make room on the device to a minimum (if at all).

  • How can I scale just one dimension of a pic? I need to shrink the width only, to fit the frame.

    HELP!  How can I shink only one dimension?  I need to shrink the width slightly to fit the frame; the program only allows scaling that is proportional, so when I shrink the width the heigh becomes too short.  Father Mike

    I'd recommend using the rectangular marquee and the crop command. This will crop the image to an exact size without any resampling or distortion. Cropping without constraint can cause distortion...like giving someone a cone head.
    Check the size of the image first by either looking in the Image<Resize<Image Size. Make a notation of the height since you don't want to change that in this case. (While you are there, change the resolution to the desired output...make notation of height after this step if you changed the resolution.)
    Select the Rectangular Marquee tool. Change the setting in the options bar to "Fixed Size" and input the desired size. (Along with the numbers, specify in this box in what units you desire...px, in, etc.
    Drag the marquee to the desired location. (As long as the marquee tool is selected, this selection box can be moved around).
    Go up to the menu bar and select Edit<Crop.
    Reading material on Image<Resize<Image Size:
    http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d59 -7ee8.html
    Reading material on Crop Command:
    http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSae2ea3b149d0c3591ae939f103860b3d59 -7eed.html

  • How do you scale your wallpaper and zoom it out for IOS7?

    I want to make a picture smaller for my background but IOS 7 wont let me any ideas?

    i know how to fix this!
    Screenshot the picture you want to set as your background, then set the screenshot as your background. It will be zoomed in a little, but it's better than just turning the parallax effect on.

  • How can I make the wallpaper without big size and without losing quality?

    When I make the wallpaper I don't want that pictures be extended.

    What's your model of iPad? Look at the specs for your  model then use a program like photoshop to make a wallpaper that is how big your screen is....for example my iPad 2 is 10024 x 768 pixels. So if I open up photoshop (or other photo editing program) I can make a template that's that pixel dimension then get other images to fit it. Export them to iTUnes and get them on my iPad and then set them as wallpaper.
    If you go in through the photos app and send your images to be wallpaper from there you'll have a bit more control than if you go in through the settings panel. But how much control will depend on the size of your original image. A nice large high res image will come out better than a tiny little low resolution image.

  • In Illustrator CS5, how can I scale down the length of each line in a selection rather than the selection as a whole?

    For example, suppose that I have selected the three lines in the image A below.  From a right-click > Transform > Scale... > Uniform (70%), I can produce B.  However I would like to produce C, in which each line is scaled down by 70%.  (Of course, I could do this by selecting and scaling down each line individually.  However my images have thousands of lines, so an individual approach is not really feasible.)

    Go to Object > Transform > Transform Each, then in the Scale section set both Horizontal and Vertical to 70 %.
    Edit: Of course, you must first select the lines that you want to scale!

  • How can I scale up the entire document?

    I want to keep all ratios of text and image the same but bump the document up by a couple inches; how do I change the entire scale of a document? (I have an A master to work with)

    Id-Extras: InDesign Scripts, Tips & Solutions – QuickResize
    Our latest release!

  • How can I scale a graph for frequency instead of time or number of points?

    Hi All - I have an application where I am reading the trace of a carrier from a spectrum analyzer. I have graphed this in the past with reading points on the trace which give me frequency and power. However that is very slow compared to just reading the trace off the analyzer which is returned as an array of 1001 power points in dBm. Because it is returned in dBm the Y scale of the graph is fine. However the X scale reads from 0 to 1000 which are he numvber of points. Is there a way to change the X scale or reflect the frequency of the data? For example I have the center frequency and the span setting from the analyzer and from that I can determine the start and stop frequency. However when I apply the minimum and maximum ranges for the X scale the displayed result changes. I would just like a way to change the X scale to what I want w/o the display being affected. Is this possible? Is there another solution that does not use the standard graphs in Labview that makes this possible? Thanks in advance for any help.
    Troy

    If you just got an array of values, you can use the property nodes XScale.multipier and XScale.Offset to scale your graph.
    Your multiplier usually is the frequency bin distance (1/capture-length or here the span/1000) , and offset mostly zero (if your first bin represents the DC part of the DFT, here center -span/2)
    Have you searched the NI drivers if you get a ready made driver of your SA? Some already read the frequency domain plots as a waveform including all scaling ...
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • How can I scale an image without it becoming blurry?

    I'm following this tutorial on youtube and I'm doing everything he says, but when I scale the image it becomes blurry on mine and his was still perfect.

    Rick is correct, but there are some features that can give better results than the default scaling:
    http://helpx.adobe.com/after-effects/using/detail-preserving-upscale-effect.html
    http://blogs.adobe.com/aftereffects/2013/06/bicubic-resampling-for-improved-scaling-and-ot her-transformations-in-after-effects.html
    By the way, it helps if you give a lot more information when asking a question. We have no idea what you've tried so far, and we don't even know what version of After Effects you're using.

Maybe you are looking for

  • Publishing and images in ie 6 & 7

    Hi folks, I think I have sort of stumbled over something here; I was having trouble getting images to display properly on ie 6 or 7 until I noticed that I ony had a problem for images where I had used the "Object causes wrap" option. I have reformatt

  • Active X controls in Excel 365 stopped working

    After today's Windows update and re-boot, I am no longer able to drop an Active X control on a sheet or even access existing controls' properties. Underlying VBA code works as do macros and form controls. Anybody else seeing this?

  • IOS 5.1 Problem with docking.

    I've recently upgraded to ios 5.1, and have generally been happy with it. i haven't encountered the battery problems a lot of people have complained about but i have had one HUGE problem. I have an alarm clock docking station i use to charge my Iphon

  • [SOLVED]Lock screen in Gnome freezes X

    Hi, everyone. When the screen locks on my laptop it freezes the entire X. It tries to dim the screen before the lock and in the middle of the process it freezes. The desktop stays "half visible". The mouse works, but Gnome doesn't react to anything.

  • Dereference a generic reference

    hi, i have a generic refrence variable say lv_ref of type ref to data. Currently it references a table of some type say X. Now i want to display the table referenced by the above generic reference variable. Could any1 plz help me out in this regard.