How can I scroll down the top menu list and then the sub-menu lists when the iPod click wheel is broken?

I have an iPod Classic 4th Generation and my click wheel connection is broken and so does not work. I can still play music on my Bose dock station but I cannot choose which album I want to play because I cannot scroll down the playlists. I can just play the first tune in the list or from where I last paused a tune. Is there a way to scroill down the list, including the top menu list, without using the click wheel?

Index Values, I think, is the property you are looking for. Set the index to 0 to be at the top.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

How can I download a previously downloaded purchase to my iTunes library on my laptop when the listing for the song in my library won't play because it says it cannot locate the file. Yes I have searched my iTunes folders and also done a full windows sear

How can I download a previously downloaded purchase to my iTunes library on my laptop when the listing for the song in my library won't play because it says it cannot locate the file. Yes I have searched my iTunes folders and also done a full windows search. The track plays on my iPad and my iPhones but will not play on my laptop!?
It has an "!" To the left of the song title in my library
My worry is that if I sync my iPad/iPhone then I will lose the track on those also!

If you cannot find the file on your hard drive then once you delete the current broken entry you should be able to redownload from iTunes in the Cloud. This assumes the item in question qualifies. Note that audiobooks, digital booklets, iTunes LPs & Extras, ringtones, selected movies etc. don't.
If prompted don't hide the item. You may find that you need to close and then reopen iTunes before it will appear for download.
tt2

After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?

After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?
Nach der Installation von Mavericks kann ich weder das MacBook Pro (2 x 2.4 GHz) noch den MacMini (2 x 2.66 GHz) herunterfahren. Es bleibt ein dauerhafter grauer Bildschirm. Nach 20 min habe ich einen erzwungenen Neustart durchgeführt.
Ausserdem startet die Macs wesentlich langsamer als mit OS X 10.6.8.

same here... sometimes it works, most of the time it doesn't!!

How can i extract a person from a picture and then animate the person

how can i extract a person from a picture and then animate the person

Basically you select the person using the various selection tools, copy the selection to the clipboard, and paste the selection onto the destination picture. Then use the Move tool to resize/reposition the person as necessary. Here is a tutorial demonstrating this as well as some advanced techniques.
http://home.earthlink.net/~msand42/PSE/composite/

The screen on the top gets distorted and then goes back normal like every 15mins

the screen on the top gets distorted and then goes back normal like every 15mins

try a pram reset,
Mac OS X 10.7 Help
Reset your computer’s PRAM
A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Note: To print these instructions, open theHelp Viewer’s Action pop-up menu (looks like a gear) and choosePrint.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Open
AppleSupport article: Resetting your Mac’s PRAM and NVRAM
AppleSupport article: Mac OS X: What’s stored in PRAM?
Keywords: khelp kmosx7

How can I uninstall Quicktime Pro 7.4.5 and then install on a new system?

Hi,
How can I uninstall Quicktime Pro 7.4.5 and then install on a new system?
I've got a new computer and I want to uninstall Quicktime Pro 7.4.5 and then install on the new system. Maybe I'm overlooking something, but a bunch of other applications have easy 'uninstall' functions right in the application toolbar. Why doesn't Quicktime?????
Thanks.

I've read that Q/T is not just a simple application but in reality, a major component of the OS. This is where it varies from other similar acting apps like WMV, AVI, FLV etc. To butress this statement, in a vague way, I remember seeing a graphic of the Mac OS when Apple was first pushing "X". QuickTime was in the same general area of depth in programming as UNIX.
So, you might not want to delete all of QuickTime just the Reg Key which should/could/might put you back to the non Q/T Pro functionality and thence legal to install on another machine.
Just be certain that the version on the new machine is the same as on the old machine or expect to buy a new $30 key.
Cheers-
Mark

How can i back up voicemails on my pc and then be able to listen to them

How can I back up voicemails to my PC and then be able to listen to them on my PC (click and play in quick-time or similar player vs storing in some type of unreadable file type)? I have googled and the only solution seems to involve buying a program. If so, what is the best program to purchase?

3rd party software like this one http://www.wideanglesoftware.com/touchcopy/index.php

I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.

I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fine

I am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.

HT3209 I've just bought Batman 'The Dark Knight Rises' and then noticed I could have bought the Bundle!

I've just bought Batman 'The Dark Knight Rises' and then noticed I could have bought the 3 Nolan films as a bundle for a really good price. If I buy the bundle will my DKR purchase be offset against the bundle price a bit like when you 'complete my album' in music?

Hi, I had the same question and I just asked the "iTunes Store/Mac App Store Customer Support" this question. They basically said that if I purchased "The Dark Knight Trilogy" I would be charged for all three movies, even though I have previously bought the two of the three movies.
It appears that movie bundles doesn't work like "complete my album" for music. If you purchased recently, you could try explaining the situation to the iTunes Support staff and seeing if they will remove "the Dark Knife Rises" by giving you store credit, then you can purchase the Trilogy instead. It could be worth a try.

I turn on speech to text but Ayer I can not scroll down in general setting to turn it off. How can I scroll down

I can not scroll down to turn of the speech to text. How can I turn it off when I can not scroll down the menu in general setting. It seem everything is locked. Thank you.

If you are referring to VoiceOver, you need to scroll using three fingers.

How can I Scroll Down without losing the lightbox in the center of the screen?

I already tried with different slideshow presets with no results.
If I click in the first photo the slideshow screen remains on the top, It seems that it doesn't scroll down with me. I would like to slidedown and click into the last photo without losing the lightbox in the center.
I already ask for help by chat, but you didn't answer how i expect.
here the link of the example:
FOR MUSE STAFF

Hi
This is not possible directly using the widgets, as you would need customize this where the page scrolls but lightbox should still be centered.
Another way of doing would be aligning the images horizontally on page with smaller version and then use lightbox effect , where the clicked image will still be on page but user can click on other images.
Thanks,
Sanjit

Anytime I move my mouse my current window disappears. I move the mouse to the top left corner and then I comes back. How can I turn this off?

Anytime I move my mouse my current window that is open disappears. When I move my mouse to the top left corner it comes back. How do I turn this off? It's not a Zoom issue, it disappears completely. Help please.

Are you running 10.6 Snow Leopard as your profile indicates?
If so, it sounds like maybe an Expose or Active Screen Corners issue?
Go to Apple > System Preferences > Expose & Spaces > Expose and
1. experment with the Active Screen Corners selections
2. take a look at your F key settings for Expose
3. lastly check your Dashboard settings

Can not shut down late 2011 MacBook Pro and turn it back on again without the hard drive disappearing?

Ok, I have searched for months for an answer to this question to no avail, probably because no one has experienced it before. I am hoping however that you guys can help me figure this one out cause it is driving me nuts! Also, I am not entirely sure what section of the support I should put this under so if I stick it in the wrong place, I apologize.
Right now my problem is very simple. When I turn off my laptop, and then try to turn it back on, my internal hard drive disappears... and I get the blinking folder with a question mark on it. I have figured out something interesting however. I have an install disk with Ubuntu Linux on it. If I boot into that first, then RESTART the laptop, not shut down and turn back on, it reads the internal hard drive just fine and I can boot as if there is nothing wrong.
Second part to the problem... If I allow the laptop in either OSX or Windows to go to sleep (aka shut off the hard drive but the computer remains on), when I attempt to wake it up, I am greeted with the usual log in screen of whichever OS I am in, but is frozen and after a few seconds goes black and restarts the computer to find that... Surprise! The hard drive is gone
I have tried every trick in the book that I can think of, but can not seem to come up with a solution to the problem... I know when the problem happened and if anyone thinks that that will help them figure this out I will type everything I did up till, including the crash that caused this, and my attempted fixes, but I have class right now so only if you guys want it I will type all that out.
What I am currently running is:
2011 MacBook Pro 13in screen
4Gb of Ram
1TB internal Hard Drive
OSX 10.11.whatever the newest update is... just updated the other day again.
Windows 8.1 on BootCamp 5 (yea I know its not supposed to work but it does) again, fully updated
Ubuntu 13.10 (I think? Doesn't really matter, its just an install disk I use to boot the computer)
If there is anything else that you guys need me to provide, I can, just simply ask. I can provide as much info as is necessary.

Sorry it took me so long to write back, But unfortunately this didn't help my issue.
My uncle and I did a lot of tests on this computer and have narrowed down the location of the problem a little bit.
We tried to first reset the SMC and the NVRAM as suggested, but the only thing that did was make the fans run on full tilt for the first session after restarting it for some reason. After that we tried re installing OSX over the OSX that was already on the system (not removing any of the files). This also didn't do anything but make refit stop working. Then we moved onto the next task at hand by removing the hard drive entirely and booting it as an external drive from one of the USB ports... as long as you booted it with the options key held down, it worked perfectly fine. Then we put an alternative hard drive into the computer and installed OSX on that. This time there was no trouble booting anything up. Everything seemed to work flawlessly. So we made a backup of my original drive (OSX, Windows, and all) onto an external hard drive and tested booting to it via USB. That again worked perfectly fine and booted right up with no problems. So after that we formatted the original hard drive and reinstated OSX. We then proceeded to transfer all the old files from the backup onto this new installation and LOW AND BEHOLD..... we were back to square one with it refusing to recognize the hard drive again.
So this basically told us that there appears to be something either wrong with the hard drive, or something got really screwed up in the software along the lines and by me copying all my old files back over, I just ended up bringing the screwed up file back over with it! (despite not copying over any settings of any kind) So I am still extremely confused as to what is going wrong... did some boot sector possibly get screwed up may be?

How can I update a catalog on my laptop and then transfer the updates to master catalog on desktop?

This is similar to Goeffbubbles question but I don't want to have the original files on both laptop and desktop
Here is the question:
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
Where did I go wrong? I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
Sorry if I am being overly verbose....Any suggestions?

the part you're missing is that you have to be a little more destructive in your creation.
here are my steps:
In LR, put the files you want to work on in a subfolder of your Primary catalog
Export Folder As Catalog with previews, but without including the DNG's
At your new location/machine work on that catalog.
Here's the part that's no fun, (obviously have a backup of your catalog before you do this)
In your primary catalog REMOVE that folder from your catalog. (this will remove all references within your catalog, but leave the RAW files alone where they were)
You then FILE-->IMPORT FROM ANOTHER CATALOG, and import your subfolder export back into your Primary catalog.
It'll bring all of your changes and previews back into your Primary catalog but with unlinked RAW files.
Click on the question mark in the corner of the thumbnail that's telling you it doesn't know where the source files are and LOCATE the original file again in your file structure, with the FIND NEARBY MISSING PHOTOS box checked.
Overly complicated for what it is, but it gets the job done.
I found your post because it was suggested on the sidebar after I just made a feature request on the same topic.

How can i share my iTunes between my iMac and a pc with auth going on the web

i like to share my iTunes as home sharing with my iMac 27 inch late 2009 processor 2.8 ghz os x yosemite 10.10
and a Asus laptop window8 with auth using iCloud

When you say you have a shared library... you mean you have a networked external hard drive that you are sharing?
In iTunes, generally...when the term Shared Library is used, it's speaking to sharing a specific computer's library over the network with different computer.
I would think it would be better to do what ya'll have been doing (one log in acct/one computer) and have her create her own Apple acct and each of you log in and out whenever purchasing music apps etc. and then setup individual playlists and pick specific playlists to sync with each individual iPhone.
If you don't want each other to know what you're buying then...disregard what I just said

How can I scroll down the top menu list and then the sub-menu lists when the iPod click wheel is broken?

Similar Messages

Maybe you are looking for