How can I see Airport is used?

I have a cable ethernet connection and a wireless Airport connection for internet. How can I see which connection Safari is using?

Your iMac will attempt to make a network connection based on the order of network connectors listed in System Preferences > Network.
For example, if AirPort is listed at the top, and Ethernet second, your iMac will create a connection by wireless. If that fails, it would try Ethernet next. It will NOT use both connections simultaneously to increase the connections' overall bandwidth.

Similar Messages

  • How can I see all devices using my airport express?

    Is there any way to see all devices using my airport express for wifi connection?

    Open Macinotsh HD > Applications > Utilities > AriPort Utility
    Select the AirPort Express and click on Manual Setup
    Click directly on the word Wireless Clients about 2/3 of the way down the page to see the MAC Address of each connected device along with the IP address that has been assigned.
    You will need to do a bit of experimenation to be able to identify which device is which based on the MAC address.
    Disconnect all but one device and note the MAC address. You now know that product that is.
    Turn that one off and connect another. You now know what that device is, etc.
    If you have 4 wireless devices...and you see 5 connected devices.....you may have an unwanted guest.

  • How can I see all files used in a Report or Transaction

    I need an expert advice. I am not an Abap  programmer but probably this is the the correct forum to post my question.
    I need to create a Query using same files that are used in report S_ALR_87012103 and some other additional files.
    Is there any transaction or functionallity that I can use to see the files used by this report ?
    << Removed - please do not offer rewards >>
    Thx. in advance for your help
    Edited by: Rob Burbank on Jun 19, 2009 1:33 PM

    Thanks for your message. I just reviewed the files in SE36.
    So I guess, next time I will have to check the name of the program in the status bar or the system status screen.
    Then, I will have to use SE38 in DEV to see the "Dictionary Structures" in the source code.
    However, on this case, I can not find the "KDF" in the source code or "Dictionary Structures".
    Other than you technical expertise ... How did you know that this program is using the KDF Logical Database.
    On my case, since I am not an Abap programmer, I would have to review all files described in the "Dictionary Structures" which by the way they are a bunch of files.
    I prefer the logical view. I liked the way the files are displayed using the SE36 and "KDF"
    Regards,
    Marco

  • How can I see what's using all my hard disk space

    The other day I noticed my HD has 3GB left of memory, but my Home folder is only using 67GB. How can I figure out what is hogging all my space and get rid of it? I do use Bittorrent but I highly doubt that would account for the loss of free space.
    Message was edited by: Jeremy Sample

    Start with the freeware Grandperspective. The interface is a bit unusual, but it should help you figure out what's taking up all your space.
    And of course make sure you're emptying the Trash.
    Regards.
    Message was edited by: Dave Sawyer

  • How can I connect airport extremes using a wired-switch connection and have roaming capability?

    My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
    BTW, I have read the various documents on the roaming network topology  but none seem to be a match to this.

    To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
    OK, got that.
    Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
    Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
    Not sure what you mean when you say "no roaming" in this configuration.
    Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
    That is correct.
    However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
    This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless.  If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

  • How can I see Web sites using Adobe Flash Player with my IPad?

    I've realised that it's not possible to visit web sites using Adobe Flash Player.
    Is There a program by which Apple allows you to solve this problem?

    Not from Apple, no, and probably never will be. You can try one of the third-party app/service combinations for playing Flash such as Skyfire , Puffin, or iSwifter. One of those might work for you, though they all have limitations and do not work with all Flash-based sites and services. You may find other suggestions for apps in the many other threads on Flash in this forum.
    Regards.

  • How can I see Exchange Groups using a phone/tablet App?

    Hey guys,
    Is there an App that allows me to View/Edit AD/Exchange Groups?
    Thanks

    We already have AD Manager and that's not what we are looking for, we don;t want to manage groups with tablets/phones, we want people to be able to see them with their phones/tablets and if somebody is the owner he/she will have permission to edit it.
    For example, we have a group called Board Members and we want all our senior managers to see this group, email them if they need to and the owner of the group will have access to change the info in it.
    Thanks,

  • How do i see who is using my wifi

    How can I see who is using my airport wifi signal?

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Hold down the option key on your Mac while you double click on the AirPort Extrme icon
    Wireless Clients will be displayed. Click the small arrow next to each client for more details on each connection.
    If you see 5 wireless clients.....and you only have 4 wireless devices.....you may have an univited guest on your network.

  • How can we see status of all Requests at a time using any tables?

    How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
    Now is there any T-Code or Table to view all requests in a single shot.
    Thanks in advance,
    Raj

    Hi Go for RSMONICDP give timestamp and u'll have it.
    Please assign points if useful
    Edited by: Aadil on Jan 21, 2008 7:43 AM

  • How can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

    how can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

    Thanks pvonk, I will try downloanding the book from the Iphone right now.......
    Just tried to download and it wants me to buy it again?  Is there some way around this?  I guess I thought that was the whole point of the cloud, buy it once and access from any of your devices right?
    Also, I have logged into the icloud.com as suggested and will plink around there for a bit and try to understand.  It is just all so dang different that what I am used to; Apple's way, that is.
    Thanks again for the Icloud tip and if you know of a way to download without making a 2nd purchase I would sure love to hear it!
    Geez. one other thing (I guess I am complaining) but I bought more space in the cloud, they took my cash fast enough but have not yet increase the size of my storage space yet?  Is Apple sometimes slow to get internal stuff done?

  • How can I see all the Transaction Code that the client is using?

    How can I see all the List of Transaction Code that the client is using?

    Hello Sugauli,
    Did you mean to ask
    transaction types the client is using?
    instead of
    transaction code
    If so, go to SPRO (in ERP system) and follow this path:
    Sales and Distribution -->
         Sales -->
             Sales Documents -->
                 Sales Document Header -->
                      Define Sales Document Types
    All the transaction types that are not used have an X in the column Block.
    Easwar Ram
    http://www.parxlns.com

  • How can I see my shuffled playlist? It used to arrange in shuffled order in the window. now it just jumps ramdomly to songs. I want to be able to see ahead and behind easily, like before.

    How can I see my shuffled playlist? It used to arrange in shuffled order in the window. now it just jumps ramdomly to songs. I want to be able to see ahead and behind easily, like before.

    David Hurwitz wrote:
    How can I see my shuffled playlist? It used to arrange in shuffled order in the window. now it just jumps ramdomly to songs. I want to be able to see ahead and behind easily, like before.
    It does not look like this is possible with iTunes 11 (or 11.0.1).

  • How can i see how many people are using my apple id without changing the password ?

    how can i see how many people are using my apple id without changing because some people have it

    I'm not sure that you can. Why have so many people got your password? So many in fact, that you don't know how many.
    You can see how many computers are authorised to play any songs you have purchased from the iTunes Store, but that isn't quite the same thing.
    Perhaps a better idea would be to change the password and not let anyone else know what it is. That would at least prevent anyone else from changing it and locking you out of your own account.

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    for starters this is not the forum for notebooks or for that matter icloud or iphone.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/iphone

Maybe you are looking for

  • How to find out the formatt type of a date.

    hello iam getting the date from some content server..then iam updating the date..the problem is before update i should know the date formatt of returned date from server so that i can set that formatt to the user entered date while updation..so how c

  • IPod USB charging when iBook/Powerbook is sleeping

    Hello all. We've got two iPods (a 5G and a 4G) and two portable Macs (PowerBook and iBook). Here's the issue: when our computers are sleeping (ie. the lids are closed), but also plugged into the wall, we could charge our old 4G iPods using the FireWi

  • Table name in which return item data is stored of a PO

    Can some please specify the table name in which return item data is stored of a PO? Thanks in advance;

  • What does syncing actually do

    My wife is afraid to attach her iPhone to the computer do to it wanting to sync with the phone. She is afraid of losing music and pictures on the phone. Please let me know what is actually done when it syncs, so I can make her feel safe. Thanks Keith

  • Windows Firewall has blocked Adobe Muse

    I open Adobe Muse for the first time and I'm trying to use it, after going thru some updates and questions I get Windows Firewall has blocked some features of this program. Does Adobe Muse need to have an Internet or network connection for anything a