How can I see all devices using my airport express?

Is there any way to see all devices using my airport express for wifi connection?

Open Macinotsh HD > Applications > Utilities > AriPort Utility
Select the AirPort Express and click on Manual Setup
Click directly on the word Wireless Clients about 2/3 of the way down the page to see the MAC Address of each connected device along with the IP address that has been assigned.
You will need to do a bit of experimenation to be able to identify which device is which based on the MAC address.
Disconnect all but one device and note the MAC address. You now know that product that is.
Turn that one off and connect another. You now know what that device is, etc.
If you have 4 wireless devices...and you see 5 connected devices.....you may have an unwanted guest.

Similar Messages

  • How can I see all files used in a Report or Transaction

    I need an expert advice. I am not an Abap  programmer but probably this is the the correct forum to post my question.
    I need to create a Query using same files that are used in report S_ALR_87012103 and some other additional files.
    Is there any transaction or functionallity that I can use to see the files used by this report ?
    << Removed - please do not offer rewards >>
    Thx. in advance for your help
    Edited by: Rob Burbank on Jun 19, 2009 1:33 PM

    Thanks for your message. I just reviewed the files in SE36.
    So I guess, next time I will have to check the name of the program in the status bar or the system status screen.
    Then, I will have to use SE38 in DEV to see the "Dictionary Structures" in the source code.
    However, on this case, I can not find the "KDF" in the source code or "Dictionary Structures".
    Other than you technical expertise ... How did you know that this program is using the KDF Logical Database.
    On my case, since I am not an Abap programmer, I would have to review all files described in the "Dictionary Structures" which by the way they are a bunch of files.
    I prefer the logical view. I liked the way the files are displayed using the SE36 and "KDF"
    Regards,
    Marco

  • How can i extend my network using an airport express

    I have an airport express that connects wirelessly to an airport extreme.  I would like to use it to extend my network.  It has a strong signal coming in to it from my extreme.  It works fine when I try to connect to the network, but it dies completely when I try to use it to extend my network.  After going through a restart, it disappears from the network.  The only way to bring it back to life is to unplug it, let it rest a few seconds, plut it in again, and then reset it to Connect to the Network before it crashes again.
    I have a model of the express that is supposed to work with extending the network.
    Thanks for any suggestions.

    I would recommend that you configure your extended network by first placing the Express in the same room as the Extreme. Once the extended configuration is verified, you can take the Express to the desired location.
    The key to extending a wireless network with decent overall bandwidth performance is the proper placement of the extending base station. Please check out the following AirPort User Tip for details.

  • How can I see all the Transaction Code that the client is using?

    How can I see all the List of Transaction Code that the client is using?

    Hello Sugauli,
    Did you mean to ask
    transaction types the client is using?
    instead of
    transaction code
    If so, go to SPRO (in ERP system) and follow this path:
    Sales and Distribution -->
         Sales -->
             Sales Documents -->
                 Sales Document Header -->
                      Define Sales Document Types
    All the transaction types that are not used have an X in the column Block.
    Easwar Ram
    http://www.parxlns.com

  • How can I see all  the idocs used in the system

    I am very new in this area. How can I see all  the idocs used in the system. Those which are posted and those which are not.

    Check thes sap help links:
    http://help.sap.com/saphelp_nw70/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
    - Regards, Dibya

  • HT201365 Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in

    Hi all, im from dubai. someone stolen my iphone5. i was trying to erase my data via find my iphone. in the end there was a notification that remove. i have click remove. then it never shows my device in find my iphone. how can i see my device in my pc...?

    Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

  • Dear I am using iphone 4s now its connected with pc to create contact group.  I have 750 contacts in phone but pc showing only 36. How can i solve this? How can I see all contacts in pc?

    Dear I am using iphone 4s now its connected with pc to create contact group.  I have 750 contacts in phone but pc showing only 36. How can i solve this? How can I see all contacts in pc?

    HI,
    It may pay to bookmark this page.
    http://www.apple.com/support/systemstatus/
    8:40 PM      Wednesday; April 10, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can I see what devices are linked to my iCloud?

    how can I see what devices are linked to my iCloud?

    You can see which devices are currently set up and/or logged in by signing in at iCloud.com on your computer.  Then click the Settings icon or select your name from the top right, then select iCloud Settings. A list of devices using your account will be displayed.

  • HT1918 How can I see ALL transaction history in my account.  Specifically, I would like to see the gift cards I have redeemed for my account.  I know I have over $200 in my account but it is not showing the balance anywhere.  Any ideas?!?!?

    How can I see ALL transaction history in my account.  Specifically, I want to review the gift cards I have redeemed but the amounts are not showing up in my account.  I know I have over $200 in my account and I am unable to access it.  The site wants me to pay by credit card and I don't want to do that.  Any ideas how I can recover the money in my account?

    You can only view your account's purchase history, you can't view a history of card redemptions.
    My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to).
    To view your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
    You've tried logging out and back into your account to see if your balance then shows ? If not, and you can't see where it might have been spent, then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can one see all printdocuments for a business Partner

    How can one see all printdocuments for a business Partner(only transaction, no table please)
    Thx

    Avajit,
    Use T-Code CORRHIST
    Hope this helps
    Rgds
    Rajendra

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • How can i see my device on itunes

    how can i see  my device on itunes

    Start here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • How can i see which devices are connected to my wireless network?

    how can i see which devices are connected to my wireless network?

    Login to your router and view the DHCP clients.

  • How can I see all photo miniatures when I open a photo album or an event in iphoto?

    How can I see all photo miniatures when I open a photo album or an event in iphoto?

    Note the zoom slider at the bottom of th iPhoto Window - drag it left.

  • How can i see all the songs I already purchased on my two computers. I don't have a network

    how can i see all the songs I already purchased on my two computers. I don't have a network

    nievesfromaustin wrote:
    I guess the question is how can I listen to all my songs that i bought from my two computers if i want to listen to all of them in one computer. I don't have a network.  Is there a web base site I can do that? or anything else?
    Please help
    Songs that you purchase from the iTunes Store are simply files.  They only sit on the computer where you purchase them, until you copy them to another computer.
    That is how it works.  There is no web site where you can play all your files.  It's primitive I know, but there may be changes coming.

Maybe you are looking for

  • Problem in activation of communication structure.

    Hi frnds, I have a problem in activation of comm. structure. Am on Version 3.5. Its a master data mapping using flexible update. So i have mapped all the relevant object in the same order as that of csv source file. But for 1 field, I have a requirem

  • Firefox Slow Even When Offline on Acer Aspire One ao751h-1145

    I have a 2gb RAM, 1.33 Ghz Intel Atom CPU Z520, and a fresh install of Windows 7 Ultimate on my Acer Aspire One ao751h-1145. I have no viruses and no programs running in the background. I've installed and uninstalled various versions of Firefox (4, 1

  • Using Markers to Synch Audio & Video?

    Hi, I am new to GB. I have been using FCP to work on the audio. I went to a mac store event about podcasting and how you can use GB as a scoring tool. I'm using GarageB to do the audio on my reel but having a few problems ... My situation is that I h

  • Assign Chart of account to Controlling area

    Hi, Why we assign Chart of account to Controlling area ? Regards, Pankaj

  • Repeat workflow by termination event

    Hi I’m developing a workflow to assign a SAP position for a New Hire employee. The sceniro is “ If an employee is hired with default position, then WF have to be triggered to HR Administrator.So far the workflow is working fine. But there is a new re