How can I see elements at the screen.

Hi..
I installed VC 6.0 but I cannot see any elements in the screen.
I also installed SVG viewer and MSXML 4.0 SP2.
Is this problem is happend because of wrong installation or connention problem with Enterprise Portal?
The VC version is 6.0 patch 6 and EP 7.0.
Message was edited by: rita kim

Hi Rita,
What SP Level of EP 6.0 had you tried?
VC 6.0 Patch 6 is supported by EP 6.0 SP 12/13. But any level beyond that also supports VC 6.0, but may give some problem in BI Connectivity.
That's why you'll have to deploy some .sda files those are required for EP 6.0.
Since neither I have installed VC 7.0 nor I have worked on that, so i can give you a list of sda files those are necessary to be deployed to the EP 6.0, to cancel out the patch incompatibility problem between VC 6.0 and EP 6.0. They are as follows:
BIUDISystems.sda
com.sap.visualcomposer.BIKit.sda
com.sap.visualcomposer.BIKitQV.ear
com.sap.visualcomposer.portalcontent.sda
com.sap.visualcomposer.sda
NOTE - Check out the order of deployment from the installation guide. Moreover, all the above sda files are available in Portal-addons folder after you download VC 6.0 patch 6 from SAP Service Market-place. But remember it all depends on the SP Level of EP 6.0 you are using, deploy the suitable sda files only, otherwise it is of no use.
Now since I have never worked on VC 7.0, that's why i don't know about that, but there may be sda files of same name for EP 7.0. Kindly check it out and deploy them on your portal.
Go to service.sap.com > downloads > Search for all catagories > Search with "VISUAL COMPOSER 7.0"
Thanks in advance,
Deep.
Message was edited by: Deep Chakrabarti
Message was edited by: Deep Chakrabarti

Similar Messages

My iphone 4s has blue bars on the screen. I can't see anything on the screen. How do I fix?

I can't see anything on the screen. I can receive calls but can't do anything on it. Help. How do I fix?

Try a reset by pressing and holding the home and power buttons until the white Apple logo appears. Ignore the slide to power off screen.

After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

My i pod took bath in rain .... i can easily see water inside the screen ... can it be fixed ?

my i pod got wet in the rain and now its totally dead ... i can clearly see water inside the screen ...... do you think that will it work again ?????

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

When I use the 'reply' tab in Hotmail I can only see half of the screen and am unable to scroll down to view the email I am responding to. How do I fix this?

I use Hotmail and when I hit 'reply' I can only see half of the page. I cannot tab down to read the email I am responding to and if I type too much the text disappears into the hidden section of the page. This does not happen in Google Chrome when I checked it so it is a Firefox problem.
How do I fix this?

OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

How can I see what drive the music I download is going to?

How can I see where the music I download and put in Itunes is being stored in?

To find out where a file is stored, select the item in iTunes and choose File > Get Info. The path to the file is shown at the bottom of the Summary pane (the Where section).

Why in address bar in not the url but "go to the web site"? How can I see url in the address bar?

Why in the address bar is not URL but "go to the web site"? How can I see the URL in the address bar?

those are some addons that other users have reported to cause the same problem in the past: Gom player, Ask Toolbar, DivX (Plus) Web Player, RealPlayer Browser Record Plugin...
in case you have one of them present, try to disable/remove it - otherwise you could disable all your extensions & reenable them one by one (a restart of the browser might be necessary after each step) until you find the culprit.

I have elements 12, running on PCS. Just bought a Mac mini, no DVD, how can I get elements onto the Mac?

I just upgraded from a Pc to a Mac mini, how can I get elements 12 onto the Mac?

Try this link and after installing validate with your 24 digit serial number - click here for PSE downloads

How can I remove marks from the screen?

I inadvertently touched the screen with the tip of a black permanent marker, and now have 2 little black dots spoiling the view! Is there anything I can (safely) use to get rid of them?

YES there is a solution!
I had this happen several years back to a new laptop. Someone borrowed my laptop at a business meeting to do a powerpoint presentation and had a permanent sharpie in their hand while they presented. In reaching over to press the "next" button during the presentation, they accidentally wrote on the screen. This put about a 1" blue mark across my screen. I totally freaked out!
Anyway, in researching a solution, I discovered that there is a chemical solution used to remove permanet marker from photographic negatives without damaging/discoloring the surface or coating. I had a recommendation to try this as it would not damage the laptop screen. It worked great!!! The permanent marker wiped off as if it were a whiteboard. In the years using this laptop, I never noticed the mark again and never noticed any sort of discoloration or damage to the surface or screen coating.
The chemical is used is a photographic emulsion cleaner called PEC-12. If you do a google search you'll find it all over the Internet. You may also be able to get it (or a reasonable substitute) at a local professional camera shop. You'll also see wipes for sale with these, which I also purchased. It's a lint free cloth that you spray the cleaner on and then wipe the film (or screen).
I hope this helps you out.
shepherdboy

The iphone and itunes shows a short version of a voice memo instead of full. only by pushing edit i see the whole thing. how can i see and export the full thing?

I recorded a voice memo but in itunes and also in iphone i can see only a hort version of my record. if i push edit, it shows the whole thing. How can i export the whole thing and listhen to it ? It only plays the 3.5 minutes instead of 35 minutes...
Please help ... it is a really inmportant record of a doctors.

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

Hi all. I've just received my new mac. I'm trying to set up. I turn it on and the apple logo on white screen loads. then the screen turns black and voice command starts. I can't see anything on the screen and it's really annoying me. please help

Please help

Found this in the voiceover manual. Try this shortcut.
Darkening the Screen
If you are a sighted user, you can use the screen curtain to simulate a non-sighted user’s experience. The screen curtain turns off all the visuals of the display, leaving a blank screen. This is a great way to learn how to use VoiceOver.
To turn the screen curtain on and off:
Press Control-Option-Shift-F11.
Edit: FN Control Option Shift F11

I've plugged in my Ipod shuffle and the device does not appear in Itunes. How can I see or update the music on it?

I've plugged my Shuffle into my MacBook Pro and Itunes did not pop up. I opened Itunesmyself, yet the device was not showing and I had no 'device' tab in the top right corner next to 'Itunes store' tab. Therefore how can I update the musci on this shuffle or see what the problem is? Thanks

Hi Swill79,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful for troubleshooting your iPod connection:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy

HT2731 How can I update apps when the screen just goes blank?

How can I update apps on my iPad my screen is just blank. My phone updates fine.

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app on their iPads - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list (potentially going through the A to Z list on the left-hand side of the screen, and similarly tapping the 'iPad Apps' button at the top left of the screen and selecting 'iPhone Apps') to find those with updates and individually update them.

My apps are invisible, it switches from the iTunes to the Reminder's app. They still work perfectly fine it's just that it's invisible, or at least I can't see it on the screen anymore. The only thing that shows is the name of the app at the bottom.

This is a pic of what's happening.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

When a document is a scanned PDF and converted to word some of the words and paragraphs are randomly a shade lighter when printed. You can (barely) see it on the screen but it is different. All font and design are the same. Any suggestions?

The lighter shading has been a problem when printing the documents. You can barely see it but it is there????

Hi Notary,
I saw something similar with my 4 TB Promise SmartStor NAS after I upgraded to Lion. Only, I had ALL of my iTunes library on the NAS and one day, about a week after the upgrade I finally tried to play music with iTunes, but it kept throwing up an error just like the one you're seeing. I searched around for a while and finally found some steps that fixed the problem.
I found this solution at another site (can't remember which) that gave credit to this site:
http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
Here are the directions I cut-n-pasted into my little notes file:
1) Launch the Terminal app
2) Run this command:
sudo chmod o+w /Library/Preferences
3) Run this command:
defaults write /Library/Preferences/com.apple.AppleShareClient afp_host_prefs_version -int 1
4) Restart your computer
5) From Finder, select an AFP server, or use “Connect To…”
This will cause the AFP Client to create the full preferences file
6) Launch the Terminal app again
7) Run this command (all on one line, make sure double-quotes are simply double-quotes from your keyboard, not pasted from the web as up and down quote marks) (yes, some of the spelling looks weird):
sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "Cleartxt Passwrd" "MS2.0" "2-Way Randnum exchange"
8) Run this command:
sudo chmod o-w /Library/Preferences
9) Restart your computer
To disable this hack, run this command (all on one line, make sure double-quotes are simply double-quotes from your keyboard, not pasted from the web as up and down quote marks):
sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array-add "DHCAST128"
I hope that helps. If not, sorry for the ludicrous-long reply.
Andy

How can I see elements at the screen.

Similar Messages

Maybe you are looking for