How can I see how hot I'm running?

Is there a small app or something I can install to see what temperature my macbook is running at? Assuming there is what temperatures are good and whats to hot?
Thanks.

Yes, you can use CoreDuo Temp or Temperature Monitor, although I can't use Temperature Monitor without CoreDuo Temp running first as it says it can't find any sensors.
As for good and bad temperatures, there are a couple threads around on that, but it seems to be tied more to the lap burn and mooing aspects. Everyone's machine is going to be different as is everyone's tolerance for something warm on their lap should they choose to rest their MacBook there (there are also several threads on just that topic alone). Likewise, the general thought on the mooing seems to be tied to the fans and their cycling on and off, and again, here we see some difference in MacBook behavior which could be, in part, tied to the environment where they are running.
Here are some threads here with some good information:
How Hot is Too Hot?
Website Tracking MB / MBP Temperatures
And here is Apple's tech note on their notebook operating temperatures.
Personally, I have had my MacBook for about a week and a half now, and I haven't had any issues with it - heat or otherwise!
MacBook, Intel Mini Duo, Dual G5, iMac FP800 Mac OS X (10.4.6)

Similar Messages

How can i see Log information of Report Run Time?

Hi Gurus,
How can i see Log information of Report Run Time?, till now i am counted report run time manually. Is there any way i can see the workbook running time in log information?.
Thanks & Regards
Vikram

There could be a few things -
At one time, you needed to run a separate script to create the tables. I'm not sure that is still the case. If you check the Administrators guide, look into the chapter that deals with the EUL Status Workbooks.
If you are not logged on as the eul owner, you may not have select privileges, or you may need to qualify the table with the schema (if there is no synonym) - select * from <eul_owner>.EUL5_QPP_STATS;
If you are on 4i, the table is EUL4_QPP_STATS

TS2756 I can not see personnel hot spot in setting cellular, I have restore iPhone 5 twice but can not see this in china, china telecome nano SIM card.

In iPhone 5 iOS 6.0.2 can not see option in setting for setting>>cellular >> ? How to enable hot spot icon to choose. Cellular service provider china mobile , it's Internet and call service work well, iPhone have restore twice but can not see hot spot option.

Personal Hotspot is provided by the carrier, but not every carrier offers this service. Contact your carrier to make sure that you can get this option.

GT780DX how hot should it run when playing games?

my exact model is:
MSI GT780DXR-429NE - i7-2670QM 2.2GHz/ 8GB / 1.5TB / GTX 570M / 17.3" / BT / Blu-Ray / Win 7 HP
..so my question, how hot should the computer run while playing games?
when I play arkham city it tops at about 72C (161F) holds around 70C
and when I play minecraft on it it gets to 72C (161F) as well
the fan can get really loud, feels like it only has two gears, slow and super fast.
is this normal?

Quote from: WizardFusion on 15-January-12, 01:16:57
I use one of these... http://www.awd-it.co.uk/cooler-master-notepal-u3-cooling-pad-for-notebooks-black.html
My laptop used to shutdown due to over heating - you could fry an egg on the bottom of it.
Since I got the cooling pad, my laptop is almost icy cold. Really.
For the price, they are very cheap. When I opened the box I was a little disappointed because I thought it was made of thin cheap metal, but it does stand up to the use.
haha cool, exactly one of those that I bought today also
I think it's working pretty nice, though where is the most optimal place to place your fans ?
the vents on the back or the actual place that gets warm? (which have no vents)

I can not see my JPGs when i run my JSP

Hello,
I have a JSP which is called by servlet by RequestDispatcher. However
when this JSP is run in browser I can not see the jpgs i put inside
as banner or logo. (By the way, i can see them in JSP viewer, I mean inside tool) Those are all static images. Is there a procedure I should do in servlet or JSP to make them appear?
Thank you very much..

the only reason you don't see them is because the browser can't find them (in that case they'll appear as red crosses). Remember that the ultimate output is HTML and that should be correct.

Macs can't see PC on home network running AVG Firewall

I up graded to AVG 8.0 which runs a firewall on all the PC's. Before upgrading from 7.5 to 8.0 PC's could see Mac's and Mac's could see PC's.
Now the PC's can see the Mac's and transfer files, but the Mac's can't see the PC's. Mac's can see Macs with know problem. I've been in contact with AVG but as of yet (3 month's) they have not given me a solution that works.
I though I'd give this a try and see if some one has a solution.
Note: 1 intel IMac G5 & a older G4

Windows firewall just isn't beefy enough for me. This isn't a Hugh problem I can go to the PC's and transfer what I need. Just want it to work like it should. AVG
has been great in the past, but this last upgrade is giving them problem.
I know it should be a easy fix, and should be just a port opening, but every fix they send just doesn't do it. I'll keep trying and if I find the answer I'll post it here for everyone to see.
Thanks

Can not see a sbRIO in MAX running on a virtual machine

I am trying to connect a sbRIO-9606 to a Windows 7 virtual machine (VMWare) running on a MacPro. I can open a CMD prompt and ping the sbRIO but when I run MAX, it does not appear in Remote Systems.
The virtual NIC is bridged to the pyhsical one (on the MAC)
Does anyone have experience doing this, or know why I cannot see the sbRIO?

Hi jaketc,
I've had similar issues at times depending on how my host and guest operating sytems network interfaces are configured. It sounds like your settings are correct (bridged), but it is difficult to guarantee. The first step I usually take is disable any network interfaces (on the host and guest OS) that are not critical to connecting to the remote target.
A more generic answer is to walk through the troubleshooting steps in this document, but it won't cover the virtualized OS considerations of your setup:
Why Does My CompactRIO Controller or Single-Board RIO Not Show Up in Measurement & Automation Explor...
Because you can ping the target, it sounds like the Single-Board RIO already has an IP address, you know what it is, and ethernet communication can be established. When I've been in that situation in the past, I've been able to manually add the RIO target to MAX. To find a system that is already configured with an IP address, simply right-click on Remote Systems and select Create New. Enter the appropriate configuration information in the dialog box, and MAX will manually place that system in the Remote Systems listing and all tasks will function properly.
Cheers,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

Can't see some Business Rules after running the Import via LCM

I am trying to migrate our Business Rules down from Prod to Dev to get them back in sync. Here is the steps I have run:
Export ALL Business Rules and Sequences from Prod via LCM
I confirmed the export directory contains an .xml file for EACH Rule.
copied the export directory down to Dev Shared Services server
Turned on DEBUG for Shared Services
Deleted ALL Business Rules and Sequences from Dev EAS BR repository
I confirmed that ALL BUsiness Rules are listed and checked in LCM Import.
run the Import from Dev Shared Services via LCM
I get a Completed successfully message. No Errors.
I Refresh Rules in Dev EAS and I only see 25% of the Business Rules listed.
I have tried to Stop/Restart the EAS services and still nothing.
I confirmed that the ID I am using to Export / Import has access on each Business Rule either directly or via a Group that has access.
Any thoughts??
Thanks in advance for any assistance on this!
Robert

Thanks John!
I was really trying to get it done via LCM since I have all other migrations being done there. but I ended up taking your advice and doing it the old fashion way via EAS export.
To answer your questions:
We are on 11.1.1.3
I did not see any problems in the Services logs for EAS. Nothing that stood out.
We are migratiing 66 Rules and 15 Sequences.
We are using Weblogic instead of Tomcat.
Even though I have a workaround for the issue I am still interested in understanding why some of them did not import via LCM. You mentioned that you might consider adjusting some config settings. What settings would you recommend looking at?
Thanks again John!
Robert
Edited by: user627522 on Nov 16, 2010 6:27 PM

Can anyone see why this won't run? I can't seem to figure out the mistake!

import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Debugging7 extends JApplet
          implements ItemListener
     //Declare components and global variables here
     JPanel mainPanel = new JPanel();
     JPanel buttonPanel = new JPanel();
     JLabel titleLabel = new JLabel("Debugging - Chapter 7", JLabel.CENTER);
     JTextArea questionTextArea = new JTextArea(2, 35);
     JRadioButton answerARadioButton = new JRadioButton();
     JRadioButton answerBRadioButton = new JRadioButton();
     JRadioButton answerCRadioButton = new JRadioButton();
     JRadioButton answerDRadioButton = new JRadioButton();
     ButtonGroup answerButtonGroup = new ButtonGroup();
     JLabel answerLabel = new JLabel(" ", JLabel.CENTER);
     Font titleFont = new Font("SansSerif", Font.BOLD, 18);
     public void init()
          //Set up the user interface (JPanels) here
          titleLabel.setFont(titleFont);
          mainPanel.setLayout(new GridLayout(0,1));
          mainPanel.add(titleLabel);
          questionTextArea.setText("To respond immediately to a change in the " +
                    "\nstate of a JRadioButton, you need to use: ");
          mainPanel.add(questionTextArea);
          questionTextArea.setEnabled(false);
          answerButtonGroup.add(answerARadioButton);
          answerButtonGroup.add(answerBRadioButton);
          answerButtonGroup.add(answerCRadioButton);
          answerButtonGroup.add(answerDRadioButton);
          buttonPanel.setLayout(new GridLayout(0, 4));
          answerARadioButton.setText("an ActionListener");
          buttonPanel.add(answerARadioButton);
          answerBRadioButton.setText("a compareTo method");
          buttonPanel.add(answerBRadioButton);
          answerCRadioButton.setText("an ItemListener");
          buttonPanel.add(answerCRadioButton);
          answerDRadioButton.setText("none of the above");
          buttonPanel.add(answerDRadioButton);
          mainPanel.add(buttonPanel);
          mainPanel.add(answerLabel);
          answerLabel.setForeground(Color.red);
          answerLabel.setFont(titleFont);
          setContentPane(mainPanel);
          //Add listeners
          answerARadioButton.addActionListener(this);
          answerBRadioButton.addActionListener(this);
          answerCRadioButton.addActionListener(this);
          answerDRadioButton.addActionListener(this);
     public void itemStatePerformed(ActionEvent event)
          //Retrieve user input and respond with calculations, etc
          Object eventSource = event.getSource();
          if(event == answerARadioButton)
               answerLabel.setText("an ActionListener is NOT correct");
          else if(event == answerBRadioButton)
               answerLabel.setText("a compareTo method is NOT correct");
          else if(event == answerCRadioButton)
               answerLabel.setText("an ItemListener IS CORRECT");
          else if(event == answerDRadioButton)
               answerLabel.setText("none of the above is NOT correct");
          else
               answerLabel.setText("answer the question, please!");
}

Okay, here's some compiling code... Although I don't really want to bother to write up the html to test it so I'll leave that up to you...
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Debugging7 extends JApplet
          implements ItemListener
     //Declare components and global variables here
     JPanel mainPanel = new JPanel();
     JPanel buttonPanel = new JPanel();
     JLabel titleLabel = new JLabel("Debugging - Chapterr 7", JLabel.CENTER);
     JTextArea questionTextArea = new JTextArea(2, 35);
     JRadioButton answerARadioButton = new JRadioButton();
     JRadioButton answerBRadioButton = new JRadioButton();
     JRadioButton answerCRadioButton = new JRadioButton();
     JRadioButton answerDRadioButton = new JRadioButton();
     ButtonGroup answerButtonGroup = new ButtonGroup();
     JLabel answerLabel = new JLabel("       ", JLabel.CENTER);
     Font titleFont = new Font("SansSerif", Font.BOLD, 18);
     public void init()
          //Set up the user interface (JPanels) here
          titleLabel.setFont(titleFont);
          mainPanel.setLayout(new GridLayout(0,1));
          mainPanel.add(titleLabel);
          questionTextArea.setText("To respond immediately to a change in the " +
                    "\nstate of a JRadioButton, you need to use: ");
          mainPanel.add(questionTextArea);
          questionTextArea.setEnabled(false);
          answerButtonGroup.add(answerARadioButton);
          answerButtonGroup.add(answerBRadioButton);
          answerButtonGroup.add(answerCRadioButton);
          answerButtonGroup.add(answerDRadioButton);
          buttonPanel.setLayout(new GridLayout(0, 4));
          answerARadioButton.setText("an ActionListener");
          buttonPanel.add(answerARadioButton);
          answerBRadioButton.setText("a compareTo method");
          buttonPanel.add(answerBRadioButton);
          answerCRadioButton.setText("an ItemListener");
          buttonPanel.add(answerCRadioButton);
          answerDRadioButton.setText("none of the above");
          buttonPanel.add(answerDRadioButton);
          mainPanel.add(buttonPanel);
          mainPanel.add(answerLabel);
          answerLabel.setForeground(Color.red);
          answerLabel.setFont(titleFont);
          setContentPane(mainPanel);
          //Add listeners
          answerARadioButton.addItemListener(this);
          answerBRadioButton.addItemListener(this);
          answerCRadioButton.addItemListener(this);
          answerDRadioButton.addItemListener(this);
     public void itemStateChanged(ItemEvent event)
          //Retrieve user input and respond with calculations, etc
          Object eventSource = event.getSource();
          if(eventSource.equals(answerARadioButton))
               answerLabel.setText("an ActionListener is NOT correct");
          else if(eventSource.equals(answerBRadioButton))
               answerLabel.setText("a compareTo method is NOT correct");
          else if(eventSource.equals(answerCRadioButton))
               answerLabel.setText("an ItemListener IS CORRECT");
          else if(eventSource.equals(answerDRadioButton))
               answerLabel.setText("none of the above is NOT correct");
          else
               answerLabel.setText("answer the question, please!");
}Message was edited by:
Dalzhim

How hot is my laptop?

Hello from Maine,
I am working on a Satellite L305D-S59222
Can I use any of those temperature monitoring softwares to discovefr how hot it is running? I think it's running too hot...
Please advise me
Thanks,
Craig

CoreTemp should work quite well on that laptop.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Can't see the ECC 6 infoset listed from CR 2008

Hi there,
I think I went over all CR/ ECC6 integration steps but I still can't see my InfoSet when I run the wizard from CR 2008...I m getting NO error just no InfoSet listed under Global or Local tree
Any input will be helpful!
Thanks,
Fouad,

Hi,
is your SAP account assigned to the InfoSet user group ?
ingo

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

How can we see status of all Requests at a time using any tables?

How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
Now is there any T-Code or Table to view all requests in a single shot.
Thanks in advance,
Raj

Hi Go for RSMONICDP give timestamp and u'll have it.
Please assign points if useful
Edited by: Aadil on Jan 21, 2008 7:43 AM

How can I see how hot I'm running?

Similar Messages

Maybe you are looking for