How can I see multiple pages in safari

I used to be able to have up to 9 pages visible in safari, my husband has been playing with my iPad and upgrading it and now I can only see one page with the others in the toolbar only.... How an I change it back pls

iOS 5 added the use of Tabs at the top of the Safari screen. Just simply tap on a tab at the top under the browser bar to switch from site to site.

Similar Messages

How can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

Try a 2 finger Pinch to see the tabs.

How can i scan multiple pages in a single file in pdf.

How can i scan multiple pages in a single file in pdf using 1536 dnf.

Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can I copy multiple pages in a spreadsheet

There seems to be a bug in one of my Numbers spreadsheets (it has repeatedly caused Numbers to crash, even after restart), so I'd like to create a new spreadsheet. How can I copy multiple pages in a spreadsheet?

Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

How can i open more page in safari

i just want to ask how can i open more page on safari in macbook,thank you so much

Choose New Window or New Tab from the File menu.
(59597)

The TOC is very confusing. How can I see the page showing the list of chapters and accompanying pages?

The TOC is very confusing. How can I see the whole list of all the chapters, as it would appear in a book? I only can see a vague image of the chapter title, and only from one chapter at a time; the chapter I am on. In the instruction example it shows also only the "title" of the chapter it pertains to, but it is all in legeable text. The inspector gives options, but it does not explain how to apply it, and I cannot see what my option will look like and to what part of the "text" it is referring.

The "lower rectangles" are thumbnails of the actual pages in your book... the text was presumably the content of your book. IF you did as I suggested to keep the TOC listing of a full book.. but removed content on all except the three chapters you want to send off to XXXXX - then the "rectangles are showing blank pages. Which is normal.
You need to understand that Apple created iBooks Author to create a book which can be obtained from their iBooks store. The application is flexible for customisation to a large extent and the innovative make use of that flexibility. The TOC basically replaces the old Index in printed books to advise readers what content is available.
On an iPad, or Mac now, Insterad of using "hyperlinks" from a written index page... which is basic web page navigation - Apple chose to have a visual TOC.
Basically you have to decide - create a three chapter sample which you seem to require - which will show the TOC as it is, or if you the whole TOC of the finished book is required to show... but not the content, you end up with blank "rectangles".
Screenshots oniPads... press the top right start button and the lower centre, home buttom together and it makes a screenshot. Transfer to your computer ( email or Dropbox type cloud) and add to your post.

How can you open multiple instances in Safari?

I am new to the Mac world. I was so used to having multiple instances of Internet Explorer open when I used a Windows PC. Can anybody please explain to me how can I open multiple Safaris? Thank you for answering my question.
McCam.....new to the iMac world.

Hi McCam,
Welcome to the world of Macs
Open Safari, and then under the File menu you can open a new window (or press command+n to do the same thing - the command key is the one with the Apple symbol on it).
Hope that helps.

How can I see all pages I have created?

Hello!
I've looked everywhere on the web and I couldn't find an answer. I have this old server that has discontinued several of it's older pages, and is now only using one. I need to clean up old links, and get rid of all the old information. I have restricted access to Contribute, so I'm not sure if I'm missing on something because of that. I can't see all pages throught that left side panel. The only way I can see the documents and pages attached to this sever is if I go to this "Choose" button beside the URL entry tab, it will open up several files and indicate theirs respective pages. Are those all the pages from the server?
I'm guessing I could also do it through FTP client, but I don't have access to it as of now. Please help me figure this out! :}

Hi,
The Pages Panel lists only the web page which you are currently editing. And when you click Choose button, it will display the web pages in the server, to which you have access to. That is, if an administrator has restricted you to edit only web pages in a particular folder in the server, then, it lists web pages only from that folder. It will not show web pages which are in the other folders.
Hope this helps.

How can I scan multiple pages from the ADF to one pdf file?

I wirelessly scan double-sided multiple-page documents, typically 37 pages, using an ADF (Automatic Document Feeder) from my HP Officejet Pro 8600 N911g to my MacBook Pro. The scanner works fine except it tries to save the files as 37 separate files and either it or the MacBook runs out of memory as it turns it into a massive file, 300mb or so. How can I get it to just scan it as one file? I have the quality setting at 300dpi.
Webbo51
This question was solved.
View Solution.

Hello again webbo51,
Thanks for the information I requested.
I am going to add a screen shot of what you should be seeing when scanning with the HP software.
You must have PDF selected to be able to scan a multiple page document into one folder.
Once you select PDF, you will see the option to Save as one file.
Please feel free to write me back if you have any other questions.
Thanks again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How can you close all pages in safari?

On my iPad it is possible to close all windows in Safari.
Is there a similar feature in Safari? Every time I clear the history, the last page remains open.
How can I close that window as well without having to first create a new blank one?
Regards

Yes, ok, but then I still have to open a new page to continue browsing.
on the iPad i can close all pages and safari for iOS defaults to favorites.
regards

How can I combine multiple Pages documents into one using iPad?

Hello all,
I have created a magazine with my students using pages. The problem is that each article is a separate documents. Now I have to put them all together. How can I do that, using iPad? Is it even possible?
Thank you

copy paste is the only way to do it on a pad - document by document.

How can tables across multiple pages be printed?

I've got DIAdem 9.0. I have a table on a report that has so much data it spans several pages. I can scroll through the tables with in DIAdem REPORT but I can only print one page at a time. Does anyone know how to print all the pages from script? Is there a way to print the page number like "Page 3 of 10". Thanks!

Hi DIAdemon,
Before issuing the PicPrint() command, you can set a couple of DIAdem variables in order to control what prints:
To print all sheets:
PrintRangeType = "AllPages"
Call PicPrint("WinPrint")
To print some sheets (for instance only sheets 2 to 4):
PrintRangeType = "PageEnums"
PrintFromPage = 2
PrintToPage = 4
Call PicPrint("WinPrint")
Also, you can insert text on each DIAdem-REPORT sheet that uses DIAdem variables to dynamically display page number information on each sheet:
Page @GraphSheetCurrNo@ of @GraphSheetCount@
This will display the "Page 3 of 10" syntax that you wanted. Note that if you insert a new DIAdem-REPORT sheet, you will have to click View >> Refresh to get the page number information updated
on all sheets.
David Mc.
NI Applications Engineer

How can i print multiple pages in ADF , JSF ages ?

i neet to print a many template of the same page in one order (Click)
the page is date is bind from a row date that user selected from ADF table ,
if the user select 2 or more rows ,, and click on Print button , i want to print all the pages , at same time
i use IFrame and javascript code to fire print window
<script type="text/javascript">
function printDiv()
PrintableX.focus();
PrintableX.onblur = Blur;
PrintableX.print();
function Blur()
PrintableX.focus();
PrintableX.onblur = null;
</script>
/////// where PrinTabelX : is Iframe id
,, but this can only print a page at a time ,
so is that possible to print many pages in web application ?

Hi,
Sorry I can't work out your question BUT if you wish to merge many pdf files to one pdf file you can use this free program (download from the following link):
http://www.pdfsam.org/?page_id=32
This program also allows you to split one big unprotected pdf file to many smaller pdf files such as extract few chapters from a thick book.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I see multiple pages in safari

Similar Messages

Maybe you are looking for