How can I see that a file has been sent for workflow?

How can I see that a file has been sent for workflow?
During the workflow phase, the file is locked for workflow. But when the file has been approved (or denied) it will have the same status as it did before the workflow process (unless you trigger the workflow by changing its location).
You can see the workflow history in the "My Request" view, but this way of determining whether a file has been approved seems complicated.
Best regards
Magnus

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

Similar Messages

How can I see the status of Rejected Documents sent for Approval from KM

I have a folder which is Approval Enabled. Now on sending a document to the approver ,if he rejects it from UWL ,how can i see it in KM ? Thank you for any input provided in advance . In UWL I cannot see it .

You can see if a document is rejected from KM folder in which the document is there .From the document level(which you have sent) click on the arrow and select Details . A new Window opens up .Now go to Actions>>approval .You will see the name of the approver who has rejected your document .Now you can resend it or skip it . This is how you do it .

JSR 120 - How can I validate if an SMS has been sent

HI
Is there a way to see if an SMS massage has been sent using the Java ME JSR 120 package? If a message has successfully been transfer to another reserved?
// Micke

You mean Blacklisted? Contact your carrier & ask. If Blacklisted the IMEI number will be on the Blacklist.

How can I see when a transport has been made in an other environement?

Hi,
Is there anywhere in SAP where you can see if a transport as been made in an other environement? I'm trying to figure out if a transport in the DVL environement has been made in the SANDBOX environement. I tried SE10 transaction, but it seems that once the transport has been made in an other environement, it doesn't appear in this transaction anymore.
Thanks, points will be given if helpful.

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

OWB - How can I see when a record has been added or amended

I am using OWB to convert and transform some data from another system. I have
created a primary key constraint and have set the Loading Type to Inser/Update.
What I need to know is how can I update a column in the destination table with
the text INSERT when a new record is inserted or UPDATE when it is updated.

I have found a work-around that does what I need. I have written a function that sits between the source view and destination table, check if the incomming key exists in the destination table and returns a string containing UPDATE, INSERT or EXCEPTION depending on what happens in the function. The value is then passed to the destination table.

HT1695 How can I tell if my message has been sent?

I am new to iphone. I just sent a text message - I think. How can I tell if it actually went?

when they respond back.

How can I see if a function has been called in background task?

I tried to see sy-batch, but it doesn't work.
thanks
Gabriele

Try calling function module ID_OF_BACKGROUNDTASK.
DATA: lv_tid type ARFCTID.
CALL FUNCTION 'ID_OF_BACKGROUNDTASK'
IMPORTING
tid = lv_tid.
IF lv_tid IS NOT INITIAL.
* This was called with CALL FUNCTION ... IN BACKGRUND TASK.
ELSE.
ENDIF.

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

How to repair my macbook pro when i had delete the app store file and know it telling that appstore file has been damage or incomplete and i had the version 10.6.8

how to repair my macbook pro when i had delete the app store file and know it telling that appstore file has been damage or incomplete and i had the version 10.6.8

so is their is any way that i can solve this matter

TS2446 im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

Hi All I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first? Thanks for help

Hi All
I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first?
Thanks for help

The language(s) that a film is available in should be listed on its description page in the store e.g. (this is from a Mac's iTunes, I don't have Apple TV so I'm not sure if you see the same description pages) :
If a film doesn't have any alternate languages or subtitles then you will just see the 'primary' language mentioned.
If it is available in other languages, then to select it when playing it : iTunes: Language settings for video

How can i see the URL which has length more than 255 chars in fucnction

Hello Every body....
I am facing one problem....I have a function module which returns URL in one table
but in the function module display i am able to see only 255 characters,but the URL is more than 255 Characters..How can i see the URL which has the length more than 255 characters..
In the Table the fields url length is 4000 chars.....
but display it is showing only 255 chars.....
Please Help me...??????????

Hello,
Have you tried breaking your structure into 255 chunks? I don't know what the structure you are moving from looks like, but you should be able break it back up into the SOLI structure. The end of a line in SOLI doesn't create a Carriage Return/Line Break. You have to insert these yourself like in the following:
* Create document
      clear mail_line.
      move 'This is a test E-Mail'(d01) to mail_line.
      concatenate mail_line
                  cl_abap_char_utilities=>newline
                  into mail_line.
      append mail_line to l_mailtext.
What kind of attachment are you wanting to create - a text tab delimited file for reading in a spreadsheet application such as excel? You might try reassembling your data table into a single string with newlines where you need them. Then use function module SCMS_STRING_TO_FTEXT to turn it back into SOLI. This is what I have done in the past. I'm afraid without knowing more about your source structure and attachment type, this is about all I can tell you.
Vasanth

How can I see the stored files in cache?

How can I see the stored files in cache? I need them!
Thanks for helping me.

The History menu lets you revisit the page where you can drag any page element from it.
How would you sort through thousands (tens of thousands) of files found in a cache?

How can I see and excel file in my iphone 4s THANKS

how can I see and excel file in my iphone 4s THANKS

either export it as a pdf if you dont need to work in it or if you do use an app called numbers from apple it supports excel as far as i know

Hi, for Iphone tips page "see when a message was sent " , then how do I know that the message has been read?

Hi,
for Iphone tips page "see when a message was sent " , then how do I know that the message has been read? Thanks

Hi Bhavesh,
Please see my replies inline:
> 1. If i remember your ealier thread correct also, I
> would suggest that you drill down in Where Did the
> Error Occur. Instead of no restriction, select
> Adapter Engine and also your Corresponding Adapter
> and then trigger the error message and check if the
> alert is triggered.
When I click on "Where did the error occur" -> "Adapter Engine", I do not have a choice of errors from the dropdown. I only see one option "*".
Is this right?
> 2. ><i>When I click on "Alert Inbox" ->
> "Subscription", I get a message "The table does not
> contain any entries". Is this correct?</i>
>
> Yes this is correct. You have defined in your alerts
> as the option as FIED RECIPIENTS. You also have
> options like Reciepients via User Role and
> Subscription Authorization in ALRTCADTDEF.
>
I see.
I've also managed to overcome this problem by selecting "Subscription Authorization" in the Alert Category Definition page, and entering SAP_XI_MONITOR as one of the roles.
After that, I am able to see a the alert category defined. By default it's already subscribed, because I'm using the same user - PISUPER.
I saw in another post that the option "Suppress Multiple Alerts of this Rule" should be left unchecked. I tried that, but I still do not see any alerts raised in ALRTDISP.
What did I miss?
Please help.
Thanks.
Ron

How can I see that a file has been sent for workflow?

Similar Messages

Maybe you are looking for