How can I see the connect option when mapping a printer microsoft iis 7

We use iis 7 web printing. Firefox is our browser of choice. However, when we go to our webpage to map a printer, and click on a printer, there is no connect option to install the printer. This is only in firefox. Internet explorer works fine once you click the compatibility option.

Looked through all of material, none have the answer. Firefox browses to the directory fine, x.x.x.x/printers. but you cannot install the printer because the "connect" option is not there.

Similar Messages

  • Clicked on a lightroom template and now can't get it to go away when trying to print my photos. How can I remove the template option when I want to print photos?

    Using Lightroom 5 on Mac. Trying to print photos and clicked on a lightroom template to see what it was about. Now all the photos i want to print apply this template and I can't figure out how to clear this template. HELP!!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

    I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
    How can a see the full screen when watching youtube. Address bar is always in view.
    Maps are foggy and some images overlap to eachother.
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis

    Luis757 wrote:
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis
    No, there is no legitimate way to downgrade iOS to an earlier version.
    Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
    You can leave feedback here: Apple Feedback.

  • HT2534 I can't see the "none" option even though I followed the procedure step by step. What is the problem?

    I can't see the "none" option when trying to open an iTunes account even though I followed the procedure detailed in the apple website step by step. What is the problem?

    jimka_2001 wrote:
    What should I try next?
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I am trying to export my bookmarks to an HTML file, but the "organize" option does not appear when I click on the "bookmarks" option on the menu bar. How can I find the organize option?

    How can I find the "organize" option or export my bookmarks to HTML when no "organize" option appears when I click on the "bookmarks" word on the menu bar?

    Menu changed to show "Show All Bookmarks" see item #7 "Menu changes (wording)" in
    You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

  • I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me :) Im running ios 6.0.1

    I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me Im running ios 6.0.1

    Well, after another call with Apple support and the engineers, no success.  After spending over 20 hours trying to debug this, I give up.  Apple was basically fishing for a solution with trial-and-error settings on the iphone.  Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
    25 hours of my life I'll never get back.
    Big bummer, and frustrating for all the obvious reasons.

  • I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

    I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

    Is your Yahoo account set up as POP3 or IMAP?

  • I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

    I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

    I tried to send it through gmail and the acct is  a POP acct
    I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

  • How can I disconnect the call in when the keypad is lock mode. I have  option either to put it silent or answer. Please tell me how to disconnect?

    How can I disconnect the call in when the keypad is lock mode. I have  option either to put it silent or answer. Please tell me how to disconnect?

    Push the Sleep/On/Off button.
    Stedman

  • Connected a usb HD to the new airport extreme 802.11ac; how can I see the HD on my iPad?

    I just purchased and set up the 802.11ac airport extreme. I have connected an usb HD; I can see it from my iMac and my MacAir laptop. Can I see the connected HD from my iPad air 2?

    You can, if you install an App like FileBrowser on the iPad. Info below:
    Stratospherix - FileBrowser - Overview

  • Recently I bought an Ipad, now I need to find the old owner, so he can unlock it, but the full e-mail isn't written. How can I see the old e-mail?

    So, yesterday I bought an Ipad 3 16gb. when I unpacked it, I found that it is locked, so I need the previous owner to unlock it. For the bad cause, the owner is from UK, and I've bought it from a  intermediary in Bulgaria. How can I see the full email so I can contact him?

    Apple will not provide that information unless order to do so by a court order.  Your only option at this point is to return it to the intermediary and get your money back.  They should not have sold you a locked device.  Then don't buy another device without confirming that it isn't locked, as explained under "how do I check for activation lock before buying a used device" in this article: Find My iPhone Activation Lock.

  • How can we pass the select-option value to modulepool program?

    hi,
      how can we pass the select-option value to modulepool program ?
      Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
               My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
               How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

    Oh I thought that you have selection-screen and again you are working on dialog programming.
    if you want to use select-option directly in module pool then it is not possible.
    but you can do other way.
    create two varaiables
    data : v_kun_low like kna1-kunnr,
             v_kun_high like kna1-kunnr.
    use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
    and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
    use can enter only low value and high value.
    when you come to program point of view
    declare one range
    ranges r_kunnr for kna1-kunnr.
    do the coding like
    r_kunnr-low = v_kun_low.
    r_kunnr-high = v_kun_high.
    r_kunnr-options = 'BT'.
    r_kunnr-sign = 'I'.
    append r_kunnr.
    now you can use r_kunnr in select query ,it will work like select-option.
    other than this there is no option.
    Thanks
    Seshu

  • How can I see the url of a link before clicking on it?

    Hi. I have Firefox 10.0.2. I used to be able to see the url of a link on web pages in the bottom left of the browser. That way, if I the url didn't seem legit I wouldn't click on the link. But now, when I put the mouse over a link, nothing comes up. How can I see the link addresses again? Thanks.

    The Status Bar. where the link previously showed on mouse hover, has been replaced by the Add-on Bar. You can install the following add-on to get some of the former Status Bar functions back. The Add-on Bar must be turned on. The add-on will also stop the showing of the "tooltip" type status loading text, and will, instead, show it in the Add-on Bar:
    *See --> https://support.mozilla.org/en-US/kb/what-happened-status-bar
    *To turn on the Add-on Bar, see --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_showing-the-navigation-toolbar '''and click on "Add-on Bar" to check it'''
    *Add -on '''''Status-4-Evar''''': https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
    *If necessary, after install and restart:
    **Open Customze window (Firefox button > Options > Toolbar Layout '''''OR''''' View > Toolbars > Customize '''''OR''''' ALT+V+T+C '''''OR'''''right-click in the empty space at the end of the Tab Bar and choose Customize)
    **'''While Customize window is open''', drag any or all of the following from the Customize window to the Add-on Bar in the order and position you want them to appear. Then click "Done" button at lower right on the Customize window.
    ***"Status Text" ('''''link on mouse hover or during page loading''''' or "Done" when page is loaded)
    ***"Progress Meter" (progress bar of page loading)
    ***"Download Status" (status of download)
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How can I see the relationship of tables in Microsoft SQL Server?

    How can I see the relationships of the tables? Exactly like what we see in Access. In Access if we select Database tool and then relationships, we can see how the tables are linked to each other. How can I find this option in SQL Server Management Studio?
    Thanks,
    GGGGGNNNNN
    GGGGGNNNNN

    Thanks,
    I could verify what you explained here. how can I overcome this message and resolve it when my database owner is not there:
    Message while starting with database diagrams of a attached/restored database
    If you have just attached/restored a database from another SQL Server instance. While accessing its database diagrams folder, you may get the following message
    It is an informational message and would prevent you from working on database diagrams. The message says that your database has no valid owner currently. Reason for this error is that database owner on a previous SQL Server instance does not exist here.
    To overcome this error just add the valid database owner through T-SQL or SSMS. Also verify the compatibility level of your database is correct for your SQL Server instance.
    I appreciate your help.
    GGGGGNNNNN
    GGGGGNNNNN

Maybe you are looking for