How can i see the document change for project in CN60

Dear all,
i want to see the project change in the report.
i know i can see it using cn60
but now, the system states that there is no data.
i have ticked document change in the project profile.
it seems useless.
could anyone tell me how i can see the change documents?
is there anything else i shall config?
thanks a lot.
Judy

Hiu2026.
Regardingu2026.cn60
Tick change documents in the project profile on the right side.
Not in the under status management. Section.
Run transaction CJEN for project
And check in cn60.
Regarding checking changes in cj20n.
Cj20nu2026.click on the WBS/Activity(which one u want to see).
Editmenuu2026.status.....systemstatus/userstatus.
Go to extramenuu2026..change documentsu2026.all.
Check in Allchangesu2026.and history.
I hope it will reach your req.
Experts....plz correct me if im wrong.
Regards
Chandra

Similar Messages

Runtime workbench , how can I see the receipients in the Alert category,

Hi guys,
Alert framework;=>
I have previosly created allert category in runtime wrokbench--->allert configuration.
Also allert rule is created with that allert category.
how can i see the recipients defined for that alert category
appreciate your help
Iver

Hi,
There are two ways one can define the recipients of the configured alerts.
1) Fixed Recipients: - Use tcode ALRTCATDEF and select your alert category and click on fixed recipient. tab
2) Recipients via User Role: It will help you to define alerts recipients via kind of roles they play.
For more help on alerts kindly check the below mentioned links :
alert management Alerts all in one
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60c24b82-6da9-2a10-5a93-f1f729d89787
The specified item was not found. - Alert Configuration
Thanks!
Aditya

How can we see the settled document

Hi
i settled the production order in the month may,now my client is asking me that all entries
which are generated at that time .i mean he is asking both FI and Controlling documents.
can any body tell me how can we see that documents
rgds
neelima

Hi Neelima,
You can use Tcode KOB1. Give the list of production orders and you will get all the details.
Also you can check the cost element report (S_alr_87013611) for a specific period and go to actual line items of the cost elements pertaining to variances.
Also you can check the GL accounts which are effected by settlement.
regards,
makrand

Pages: how can I see the structure of a document?

Hi, I'm a new user, I just bought my first mac last week.
I have a problem with Pages. How can I see the structure (organization) of the document I'm working on? I mean headings, headings 2, etc? In Microsoft Word you see it on the left. I don't mean thumbnails, but the construction of the document.
I know how to mark headings and other parts of a typical document but how can I see the structure afterwards?
Thanks in advance.

What you are asking for is Outlining, and that has been removed from Pages 5.2 along with 110 other features.
Use Pages '09 if you can.
Peter

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

How can i see the code of SAP Exit for SAP Defined Variables

Hi,
   It's very Urgent! How can i see the Source Code of SAP Provided Variables. I need to write code for User Defined Variables. please help me. It's very Urgent.
Thanks in Advance.
Nagesh.

hi Nagesh,
sample code for variable exit,
there is 'how to' docs, can't see your email address.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'CUMMONTH'.
    IF I_STEP = 2.                                  "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'MONTH'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW      = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
        L_S_RANGE-LOW+4(2) = '01'.
        L_S_RANGE-HIGH     = LOC_VAR_RANGE-LOW.   "high value = input
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.
ENDCASE.

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How can I see the tracklist in the Podcast app (like I can in the Music app in ios6)?

When playing a podcast in the Music app in ios6, I can tap the screen and see the track list. How can I see the track list in the Podcast app in ios7?

Dakota
The table MARV holds the current and previous values for the purchasing period and who changed them. The table is usually set for logging of changes and you may be able to find the history you want depending on how your database is setup. I hope this helps.
Regards
H

How can I see the alpha channel in the channels palette?

Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!

OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources gFormatRecord->resourceProcs->getProc
#define gAddResource gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
 gFormatRecord->maxData = 0;
static void DoReadStart(void){
 char header[2];
 ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
 // Read the file header
 *gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
 if (*gResult != noErr) return;
 ReadSome (sizeof( header ) * 2, &header);
 if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
 int headerID = CheckIdentifier (header);
 if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
 (const char*)gMxiInfo->filename,
 gMxiInfo->width, gMxiInfo->height,
 gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
 gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
 gMxiInfo->scattering,
 gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
 gMxiInfo->availableBuffersMask,
 gMxiInfo->widthPreview, gMxiInfo->heightPreview,
 gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
 // We will use that string to obtain later the desired extra buffer.
 gMxiInfo->extraBuffersList[count] = "ALPHA";
 gMxiInfo->hasAlpha = true;
 count++;
else{
 gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
 gMxiInfo->mode = plugInModeRGBColor;
 break;
case 16:
 gMxiInfo->mode = plugInModeRGB48;
 break;
case 32:
 gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
 break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
 // Preview always RGB8.
 imageSize.v = gMxiInfo->heightPreview;
 imageSize.h = gMxiInfo->widthPreview;
 gFormatRecord->depth = 8;
 gFormatRecord->imageMode = plugInModeRGBColor;
 gFormatRecord->planes = 3;
 gFormatRecord->loPlane = 0;
 gFormatRecord->hiPlane = 2;
 gFormatRecord->colBytes = 3;
 gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
 gFormatRecord->planeBytes = 1;
else{
 // Configure the layers. All RGBA32.
 imageSize.v = gMxiInfo->height;
 imageSize.h = gMxiInfo->width;
 gFormatRecord->depth = IMAGE_DEPTH;
 gFormatRecord->imageMode = gMxiInfo->mode;
 gFormatRecord->layerData =
 2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
 gFormatRecord->planes = 4; // RGBA.
 gFormatRecord->loPlane = 0;
 gFormatRecord->hiPlane = 3;
 gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
 gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
 gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
 gFormatRecord->transparencyPlane = 3;
 gFormatRecord->transparencyMatting = 1;
 gFormatRecord->blendMode = PIBlendLinearDodge;
 gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
 return;
/// Called for prewiew only.
static void DoReadContinue (void){
 // Dispose of the image resource data if it exists.
 DisposeImageResources ();
if( gFormatRecord->openForPreview ){
 VPoint imageSize = GetFormatImageSize();
 gFormatRecord->data = gMxiInfo->bufferPreview;
 if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
 if( gFormatRecord->data != NULL ){
 delete[] (Crgb8*)gMxiInfo->bufferPreview;
 gMxiInfo->bufferPreview = NULL;
 gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
 //DoReadICCProfile ();
static void DoReadFinish (void)
 // Dispose of the image resource data if it exists.
 DisposeImageResources ();
 WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
 AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
 for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
 if( gMxiInfo->lightNamesList[i] != NULL ){
 delete[] gMxiInfo->lightNamesList[i];
 gMxiInfo->lightNamesList[i] = NULL;
 delete[] gMxiInfo->lightNamesList;
 gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
 delete[] gMxiInfo->bufferPreview;
 gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
 delete[] gMxiInfo->filename;
 gMxiInfo->filename = NULL;
if( cMax != NULL ){
 delete cMax;
 cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
 int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
 gFormatRecord->data = (void*)new byte[bufferSize];
 for( int i = 0; i < nPixels; i++ ){
 ((float*)gFormatRecord->data)[ i * 4 ] =
 ((float*)gFormatRecord->data)[ i * 4 + 1 ] =
 ((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
 ((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
 // Set the layer name.
 gFormatRecord->layerName = new uint16[64];
 gFormatRecord->layerName[0] = 'B';
 gFormatRecord->layerName[1] = 'a';
 gFormatRecord->layerName[2] = 'c';
 gFormatRecord->layerName[3] = 'k';
 gFormatRecord->layerName[4] = 'g';
 gFormatRecord->layerName[5] = 'r';
 gFormatRecord->layerName[6] = 'o';
 gFormatRecord->layerName[7] = 'u';
 gFormatRecord->layerName[8] = 'n';
 gFormatRecord->layerName[9] = 'd';
 gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
 void* lightBuffer = NULL;
 void* alphaBuffer = NULL;
 byte foob;
 dword food;
 // Get the light buffer.
 bool res = cMax->getLightBuffer(
 (char*)gMxiInfo->filename,
 gFormatRecord->layerData - 1, IMAGE_DEPTH,
 lightBuffer,
 gMxiInfo->width, gMxiInfo->height, lightName);
 if(!res){
 *gResult = readErr;
 return;
 if( gMxiInfo->hasAlpha ){
 // Get the alpha buffer.
 res = cMax->getExtraBuffer(
 (char*)gMxiInfo->filename,
 "ALPHA", IMAGE_DEPTH, alphaBuffer,
 food, food, foob);
 if(!res){
 *gResult = readErr;
 return;
 else{
 alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
 for( int i = 0; i < nPixels; i++ ){
 // Only need to set the red channel.
 ((float*)alphaBuffer)[ i * 3 ] = 1.0;
 // Put them together.
 gFormatRecord->data = (void*)new byte[bufferSize];
 for( int i = 0; i < nPixels; i++ ){
 ((float*)gFormatRecord->data)[ i * 4 ] = ((float*)lightBuffer)[ i * 3 ];
 ((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
 ((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
 ((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
 delete[] (float*)lightBuffer;
 delete[] (float*)alphaBuffer;
 // Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
 *gResult = userCanceledErr;
 return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
 delete[] (float*)gFormatRecord->data;
 gFormatRecord->data = NULL;
if( lightName != NULL ){
 delete[] lightName;
 lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance.

How can we transport the standard changed OTR texts w.r.t translation?

How can we transport the standard changed OTR texts with out effecting the translation concept.?
means i need to see the text in different languages which ever logged in.

using the function module SOTR_API_WB_TRANSLATE you can maintain translation in different languages for the OTR texts maintained in your WDA.
No need to transport,you can directly execute this FM by passing the below parameters:
SOURCE_LANGU                    EN
TARGET_LANGU                    FR
PGMID                           LIMU
OBJECT                          WDYV
OBJ_NAME                        %
FLAG_STRING
EDIT_MODE                       T

How can i see the Asset purchase order & GR after settlement

Hello Gurus,
Would you please tell me how can i check the Asset Purchase order, which is settled (WBS Element)? How can i see the GR document for the specific asset? & if i treat as a expeneses toward the project where i get the GR/ PO in asset explorer?
Warm Regards,
Dhananjay Rahane.

Dear,
Dhanajay.
Purchase order related to asset you can see in Asset Master itself. Go to AS03 - Environment ( Menu bar ) - Click on Purchase Order. Here you will have all the relevant PO's relating to asset.
GR you can see in PO at a Purchase Order history. The data relating to asset you can see in left hand side navigation in AW01N Asset Explorer. Like as Vendor, PO's, etc.
WBS in PO you can see in Account Assignment Tab if your PO is created with N. ( Network PO ). WBS linked to Network you can see in CJ20N ( Project Builder ).
WBS Actual values can see in report CJI3 Actual Cost & Revenues.
I hope this helps you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

How Can I see the CO-PA report

hi sap experts,
how can i see the CO-PA report and in detail configuriation,
and controlling reports.
Advance Thanks,

For executing COPA - Tcode is KE30 (for define change etc... KE31 to KE34)
Standard reports available in controlling sub-components under information system
Regards
Radha

How can i see the URL which has length more than 255 chars in fucnction

Hello Every body....
I am facing one problem....I have a function module which returns URL in one table
but in the function module display i am able to see only 255 characters,but the URL is more than 255 Characters..How can i see the URL which has the length more than 255 characters..
In the Table the fields url length is 4000 chars.....
but display it is showing only 255 chars.....
Please Help me...??????????

Hello,
Have you tried breaking your structure into 255 chunks? I don't know what the structure you are moving from looks like, but you should be able break it back up into the SOLI structure. The end of a line in SOLI doesn't create a Carriage Return/Line Break. You have to insert these yourself like in the following:
* Create document
      clear mail_line.
      move 'This is a test E-Mail'(d01) to mail_line.
      concatenate mail_line
                  cl_abap_char_utilities=>newline
                  into mail_line.
      append mail_line to l_mailtext.
What kind of attachment are you wanting to create - a text tab delimited file for reading in a spreadsheet application such as excel? You might try reassembling your data table into a single string with newlines where you need them. Then use function module SCMS_STRING_TO_FTEXT to turn it back into SOLI. This is what I have done in the past. I'm afraid without knowing more about your source structure and attachment type, this is about all I can tell you.
Vasanth

How can i see the document change for project in CN60

Similar Messages

Maybe you are looking for