How can I see the elapsed time in an imovie project

I am submitting a video for my national board teaching portfolio, and I need to reference certain things in the video at a certain time. How do I identify the time of a particular frame?

I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request!

Similar Messages

How can I see the elapsed time on imported video?

I'm trying to make a video in iMovie 11'. I would like to be able to view the elapsing time of the song I imported so I can match video footage with audio. With the older version of iMovie, I could see a time clock on the bottom of the video I was importing, so I could match the mouth to the lyrics.
In the older iMovie version, the entire audio would play when only part of the clips had been imported by me. Now with this version, the song stops playing when the clips stop. So partial completion of the video, doesn't allow a full time clock of the total song to allow me to match the voice on the audio with the film of someone singing.
In short, I can't find the running time clock for the video player in the project library.
Can you help me with thsi? The help menu has not anweered my questions.
Thanks.
Dave Demoise

I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request!

How can I get the elapse time for execution of a Query for a session

Hi ,
How can I get the elapse time for execution of a Query for a session?
Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
Thanks in advance.

Hi
You can use the dbms_utility.get_time tool (gives binary_integer type value).
1/ Initialize you time and date of beginning :
v_beginTime := dbms_utility.get_time ;
2/ Run you procedure...
3/ Get end-time with :
v_endTime := dbms_utility.get_time ;
4/ Thus, calculate elapsed time by difference :
v_elapsTime := v_endTime - v_beginTime ;
This will give you time elapsed in of 100th of seconds...
Then you can format you result to give correct print time.
Hope it will help you.
AL

How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

How can I see Date and Time of an event in iMovie 10.0.4?
Thank you for your answer.
greetings from Switzerland

Managing Profiles
http://support.mozilla.com/en-US/kb/Managing-profiles

How can I display the elapsed time of the course using Advanced Actions in Captivate?

I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?

I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions

How can I get the Elapsed Time express to output in milliseconds?

I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
Thanks in advance!

I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
Attachments:
Example_VI.png ‏4 KB

How can I Know the real time of my 24p project?

I made an animatc as part of planning a 7 min animated video on Premiere Pro using a 24p project, trunsting that my ruler is set to 24 fps and that the time displayed was the real time of the video (not the NDF time), since there was no indication on Premiere's create sequence window that the ruler was on NDF basis. (When you cerate a new sequence,on the new sequence settings window you set the timebase as 23,976, but the ruler is shown as 24FPS, no indication of drop or non drop frame.)
Recently I Had to export a 29,97 version of my project, and it was in fact 14 frames bigger. So I concluded that my time ruler was also showing me a NDF time not the real time of the video.
Is there a way of creating a 24p project, with a ruler that gives me the real "clock" time? Or any Formula to "convert" a NDF time to DF (real) time, so I know where, on an NDF ruler, do I have to stop to have a 7 min video?
Thanks in advance
Mauricio

I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
charlie

How can I see the commit time stamp for a transaction?

I’m looking to see if there is any way to tell, through a select, when a transaction was committed?
I know you can get the transaction id by selecting the
sys.dm_tran_current_transaction within a trigger and saving it to the table your writing to. But once you have that can you later use that transaction ID to see when the transaction as a whole was committed. This
would be similar to the way change tracking uses the sys.dm_tran_commit_table, and the $sys_change_xdes_id field on the table being tracked, but you could do it through a select without being logged into a DAC connection. My question pertains to SQL Server
versions 2005 and greater, but if this can only be done in a specific version please let me know.
This would pertain to a read committed isolation level if that makes a diffrence.
Thank you

CREATE PROCEDURE sp1 AS
BEGIN TRY
   SET NOCOUNT ON
   SET XACT_ABORT ON
   SELECT 1/0
END TRY
BEGIN CATCH
   IF @@trancount > 0 ROLLBACK TRANSACTION
END CATCH
go
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

HT201269 How do I see the last time my phone was backed up?

My iphone has gone dark. I was planning on getting a new phone but I can't turn my old phone on to transfer data. How can I see the last time my phone was back up?

If you back up to iTunes, open iTunes on your computer. Go to Preferences (from the leftmost item in iTunes' menu bar), then choose "Devices". The backup time will be shown there.
If you back up to iCloud, you would be able to see it on your iPhone, but since you can't turn it on, I don't think there is another way to find it.

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?

I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

How can I see the MAD results in my planning book

Hello Gurus:
I'm setting up some statistical models in APO DP and running some test data through them. How can I see the results of the MAD to verify if the models are calculating correctly? I was hoping I can see the monthly MAD values in a key figure in my planning book?
Does anyone know?
Andrea

Hello Andrea,
As far as I know, I don't think there's a standard key figure or macro could acheive this.
MAD or other errors in forecast are not saved as time series, so I don't know why you want to see them as time series.
You can see the forecast errors in forecast result screen, and if you push comparision button, you can see forecast errors for several last runs.
But I don't know how to put these value into planning book, unless you want to apply your own logic ...
Best Regards,
Ada

How can I see the elapsed time in an imovie project

Similar Messages

Maybe you are looking for