How can I see the past stat data?

Hello,
We're looking for a way to check the past stat data. We backed up the stat file, e.g. stat50, stat51,stat52... We tried to use the report RSSTAT26 and specified the backed up stat file, but it did not return any records.
As stat/max_files is set to 48, we can see the stat data for 2 days via transaction STAD. But we'd like know how to see the stat older than 2 days.
Does anyone have an idea?
Regards,
Masako

Hi Sree,
Thanks for your information. Unfortunately we cannot see any stat data which is older than 2 days by transaction STAD.
I checked help.sap.com.
http://help.sap.com/saphelp_nw70/helpdata/en/27/930e422dfcdc2ce10000000a1550b0/frameset.htm
And found the following statement.
This means that after two days, you can no longer perform an analysis below transaction level.
We're looking for a way to analyze the stat files which are backed up before it is overwritten.
Our environment is as follows.
-NW7.0
-ERP 6.0
-AIX/DB2
Best regards,
Masako Konno

Similar Messages

How can I see the entire image date in Metadata EXIF DD/MM/YY?

I cannot see the full image date under metadata EXIF, just the day and month. Could you help me to see the year the picture was taken? Thanks a lot.

Where are you not seeing the full date information? If it is on one of the Browser Metadata Overlays, you may have to increase the size of the thumbnails or remove some of the other data being shown (and/or the metadata labels).
On my Metadata Overlays for Browser, Viewer, and Tooltip, as well as on the Metadata tab of the Inspector, the full date-time stamp is shown, e.g.:
10/26/11 4:23:41 p EDT

How can i see the date of the pictures i took? help!

how can i see the date of the pictures i took? help!

Import them to your computer (see http://support.apple.com/kb/HT4083) and the date and other exif data will be available.

How can I see the date on my photos taken from my iPod touch

how can I see the date on my photos taken from my iPod touch...

The requirements for the app are:
Requirements: Compatible with iPhone, iPod touch, and iPad.Requires iOS 5.0 or later.

How can i see the storage data on my icloud

how can i see the storage data on my icloud

If you mean to see how much is used and available:
Settings > iCloud > (scroll to bottom) > Storage & Backup > Total Storage, Available, Manage Storage >

I am new to Photoshop Elements. How can I see the exif data of my photograph?

I am new to Photoshop Elements. How can I see the exif data of a photo?

I have Elements 10. Sorry I am really struggling with the programme and I
dont see the word Menu anywhere on the editor screen.
Rev. Dr. Jill Morley
PO Box 51059
Musgrave Rd.
Durban.
[email protected]
0837791978 (c)
0312080473 (h) and (f)

How can i see the URL which has length more than 255 chars in fucnction

Hello Every body....
I am facing one problem....I have a function module which returns URL in one table
but in the function module display i am able to see only 255 characters,but the URL is more than 255 Characters..How can i see the URL which has the length more than 255 characters..
In the Table the fields url length is 4000 chars.....
but display it is showing only 255 chars.....
Please Help me...??????????

Hello,
Have you tried breaking your structure into 255 chunks? I don't know what the structure you are moving from looks like, but you should be able break it back up into the SOLI structure. The end of a line in SOLI doesn't create a Carriage Return/Line Break. You have to insert these yourself like in the following:
* Create document
      clear mail_line.
      move 'This is a test E-Mail'(d01) to mail_line.
      concatenate mail_line
                  cl_abap_char_utilities=>newline
                  into mail_line.
      append mail_line to l_mailtext.
What kind of attachment are you wanting to create - a text tab delimited file for reading in a spreadsheet application such as excel? You might try reassembling your data table into a single string with newlines where you need them. Then use function module SCMS_STRING_TO_FTEXT to turn it back into SOLI. This is what I have done in the past. I'm afraid without knowing more about your source structure and attachment type, this is about all I can tell you.
Vasanth

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

How can I see the contents in a Ref Cursor

I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?

A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg

How can we update the last synchronization date and time..on SUP in sccm 2012 R2

Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji K

You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

How can I see the MAD results in my planning book

Hello Gurus:
I'm setting up some statistical models in APO DP and running some test data through them. How can I see the results of the MAD to verify if the models are calculating correctly? I was hoping I can see the monthly MAD values in a key figure in my planning book?
Does anyone know?
Andrea

Hello Andrea,
As far as I know, I don't think there's a standard key figure or macro could acheive this.
MAD or other errors in forecast are not saved as time series, so I don't know why you want to see them as time series.
You can see the forecast errors in forecast result screen, and if you push comparision button, you can see forecast errors for several last runs.
But I don't know how to put these value into planning book, unless you want to apply your own logic ...
Best Regards,
Ada

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

How can I see the alpha channel in the channels palette?

Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!

OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources   gFormatRecord->resourceProcs->getProc
#define gAddResource    gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
    gFormatRecord->maxData = 0;
static void DoReadStart(void){
    char header[2];
    ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
    // Read the file header
    *gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
    if (*gResult != noErr) return;
    ReadSome (sizeof( header ) * 2, &header);
    if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
    int headerID = CheckIdentifier (header);
    if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
                (const char*)gMxiInfo->filename,
                gMxiInfo->width, gMxiInfo->height,
                gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
                gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
                gMxiInfo->scattering,
                gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
                gMxiInfo->availableBuffersMask,
                gMxiInfo->widthPreview, gMxiInfo->heightPreview,
                gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
    // We will use that string to obtain later the desired extra buffer.
    gMxiInfo->extraBuffersList[count] = "ALPHA";
    gMxiInfo->hasAlpha = true;
    count++;
else{
    gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
      gMxiInfo->mode = plugInModeRGBColor;
      break;
case 16:
      gMxiInfo->mode = plugInModeRGB48;
      break;
case 32:
      gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
      break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
    // Preview always RGB8.
    imageSize.v = gMxiInfo->heightPreview;
    imageSize.h = gMxiInfo->widthPreview;
    gFormatRecord->depth = 8;
    gFormatRecord->imageMode = plugInModeRGBColor;
    gFormatRecord->planes = 3;
    gFormatRecord->loPlane = 0;
    gFormatRecord->hiPlane = 2;
    gFormatRecord->colBytes = 3;
    gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
    gFormatRecord->planeBytes = 1;
else{
    // Configure the layers. All RGBA32.
    imageSize.v = gMxiInfo->height;
    imageSize.h = gMxiInfo->width;
    gFormatRecord->depth = IMAGE_DEPTH;
    gFormatRecord->imageMode = gMxiInfo->mode;
    gFormatRecord->layerData =
        2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
    gFormatRecord->planes = 4; // RGBA.
    gFormatRecord->loPlane = 0;
    gFormatRecord->hiPlane = 3;
    gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
    gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
    gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
    gFormatRecord->transparencyPlane = 3;
    gFormatRecord->transparencyMatting = 1;
    gFormatRecord->blendMode = PIBlendLinearDodge;
    gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
    return;
/// Called for prewiew only.
static void DoReadContinue (void){
    // Dispose of the image resource data if it exists.
    DisposeImageResources ();
if( gFormatRecord->openForPreview ){
    VPoint imageSize = GetFormatImageSize();
    gFormatRecord->data = gMxiInfo->bufferPreview;
      if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
    if( gFormatRecord->data != NULL ){
      delete[] (Crgb8*)gMxiInfo->bufferPreview;
      gMxiInfo->bufferPreview = NULL;
      gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
    //DoReadICCProfile ();
static void DoReadFinish (void)
    // Dispose of the image resource data if it exists.
    DisposeImageResources ();
    WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
    AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
    for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
      if( gMxiInfo->lightNamesList[i] != NULL ){
        delete[] gMxiInfo->lightNamesList[i];
        gMxiInfo->lightNamesList[i] = NULL;
    delete[] gMxiInfo->lightNamesList;
    gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
    delete[] gMxiInfo->bufferPreview;
    gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
    delete[] gMxiInfo->filename;
    gMxiInfo->filename = NULL;
if( cMax != NULL ){
    delete cMax;
    cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
    int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
    gFormatRecord->data = (void*)new byte[bufferSize];
    for( int i = 0; i < nPixels; i++ ){
      ((float*)gFormatRecord->data)[ i * 4 ]     =
      ((float*)gFormatRecord->data)[ i * 4 + 1 ] =
      ((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
      ((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
    // Set the layer name.
    gFormatRecord->layerName = new uint16[64];
    gFormatRecord->layerName[0] = 'B';
    gFormatRecord->layerName[1] = 'a';
    gFormatRecord->layerName[2] = 'c';
    gFormatRecord->layerName[3] = 'k';
    gFormatRecord->layerName[4] = 'g';
    gFormatRecord->layerName[5] = 'r';
    gFormatRecord->layerName[6] = 'o';
    gFormatRecord->layerName[7] = 'u';
    gFormatRecord->layerName[8] = 'n';
    gFormatRecord->layerName[9] = 'd';
    gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
    void* lightBuffer = NULL;
    void* alphaBuffer = NULL;
    byte foob;
    dword food;
    // Get the light buffer.
    bool res = cMax->getLightBuffer(
                           (char*)gMxiInfo->filename,
                           gFormatRecord->layerData - 1, IMAGE_DEPTH,
                           lightBuffer,
                           gMxiInfo->width, gMxiInfo->height, lightName);
    if(!res){
      *gResult = readErr;
      return;
    if( gMxiInfo->hasAlpha ){
      // Get the alpha buffer.
      res = cMax->getExtraBuffer(
                            (char*)gMxiInfo->filename,
                            "ALPHA", IMAGE_DEPTH, alphaBuffer,
                            food, food, foob);
      if(!res){
        *gResult = readErr;
        return;
    else{
      alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
      for( int i = 0; i < nPixels; i++ ){
        // Only need to set the red channel.
        ((float*)alphaBuffer)[ i * 3 ] = 1.0;
    // Put them together.
    gFormatRecord->data = (void*)new byte[bufferSize];
    for( int i = 0; i < nPixels; i++ ){
      ((float*)gFormatRecord->data)[ i * 4 ]     = ((float*)lightBuffer)[ i * 3 ];
      ((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
      ((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
      ((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
    delete[] (float*)lightBuffer;
    delete[] (float*)alphaBuffer;
    // Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
      *gResult = userCanceledErr;
      return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
    delete[] (float*)gFormatRecord->data;
    gFormatRecord->data = NULL;
if( lightName != NULL ){
    delete[] lightName;
    lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance.

How can I set the United States as my country when opening PSE 10?

How can I set the United States as my country when opening PSE 10 so I don't have to scroll down every time?

Why do you have to scroll down every time? You should only see the country window the very first time you launch PSE after installing it.

How can i see the code of SAP Exit for SAP Defined Variables

Hi,
   It's very Urgent! How can i see the Source Code of SAP Provided Variables. I need to write code for User Defined Variables. please help me. It's very Urgent.
Thanks in Advance.
Nagesh.

hi Nagesh,
sample code for variable exit,
there is 'how to' docs, can't see your email address.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'CUMMONTH'.
    IF I_STEP = 2.                                  "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'MONTH'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW      = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
        L_S_RANGE-LOW+4(2) = '01'.
        L_S_RANGE-HIGH     = LOC_VAR_RANGE-LOW.   "high value = input
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.
ENDCASE.

How can I see the past stat data?

Similar Messages

Maybe you are looking for