How can I see the same configuration make in Flash CS6, in Flash CC?
In Flash CS6, when making the configuration to create a new flash file, I would put AS2 and Flash Player 9. I would review those configurations in the publish settings panel. If I open that same file (made in CS6) using the Flash CC, the publish settings display from 10.3 and AS3. Is there a way to check those configurations that I had on CS6, using Flash CC? I have a production of 200 banners made in CS6 but have now installed Flash CC. I would like to know how can I verify from Flash CC that all banners are made in Flash Player 9 and AS2.
no, flash pro cc does not support as2.
continue to use flash pro cs6 for as2 projects.
Similar Messages
-
I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?
for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone -
I have videos that are taking up too much space on my phone. I want to be able to see them through the Apple TV. When I put them in iPhoto, they don't show up on Apple TV. I have an IPhone 4 and a MacBook with I think all the updates. Thanks.
Yes, they are in iPhoto in a smart album. I didn't know they could be imported to iTunes so I got excited. I went to add to iTunes library. I can see them, but when I try to add them, it is grayed. I clicked on New Folder, but it won't go. What am I missing?
-
How can I use the same "I Tunes" on two different computers
I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
Where does the I Tunes save the playlist on the hard drive ?
I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
Operating systems of the computers:
Desktop: XP Pro
Notebook: Vista BussinessI use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
tt2 -
after sync my iphone4 to itunes i can't see the same apps on itunes that are on my phone. How do i make them show the same?
Hello Louise,
There are a couple of ways that you can download your apps to iTunes on your computer.
First, you can transfer your purchases to from your iPhone to your computer using the steps in this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Alternatively, you can download the apps directly from the iTunes Store using the steps in this article:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How can I see the alpha channel in the channels palette?
Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources gFormatRecord->resourceProcs->getProc
#define gAddResource gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
gFormatRecord->maxData = 0;
static void DoReadStart(void){
char header[2];
ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
// Read the file header
*gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
if (*gResult != noErr) return;
ReadSome (sizeof( header ) * 2, &header);
if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
int headerID = CheckIdentifier (header);
if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
(const char*)gMxiInfo->filename,
gMxiInfo->width, gMxiInfo->height,
gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
gMxiInfo->scattering,
gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
gMxiInfo->availableBuffersMask,
gMxiInfo->widthPreview, gMxiInfo->heightPreview,
gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
// We will use that string to obtain later the desired extra buffer.
gMxiInfo->extraBuffersList[count] = "ALPHA";
gMxiInfo->hasAlpha = true;
count++;
else{
gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
gMxiInfo->mode = plugInModeRGBColor;
break;
case 16:
gMxiInfo->mode = plugInModeRGB48;
break;
case 32:
gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
// Preview always RGB8.
imageSize.v = gMxiInfo->heightPreview;
imageSize.h = gMxiInfo->widthPreview;
gFormatRecord->depth = 8;
gFormatRecord->imageMode = plugInModeRGBColor;
gFormatRecord->planes = 3;
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 2;
gFormatRecord->colBytes = 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
gFormatRecord->planeBytes = 1;
else{
// Configure the layers. All RGBA32.
imageSize.v = gMxiInfo->height;
imageSize.h = gMxiInfo->width;
gFormatRecord->depth = IMAGE_DEPTH;
gFormatRecord->imageMode = gMxiInfo->mode;
gFormatRecord->layerData =
2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
gFormatRecord->planes = 4; // RGBA.
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 3;
gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->transparencyPlane = 3;
gFormatRecord->transparencyMatting = 1;
gFormatRecord->blendMode = PIBlendLinearDodge;
gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
return;
/// Called for prewiew only.
static void DoReadContinue (void){
// Dispose of the image resource data if it exists.
DisposeImageResources ();
if( gFormatRecord->openForPreview ){
VPoint imageSize = GetFormatImageSize();
gFormatRecord->data = gMxiInfo->bufferPreview;
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
if( gFormatRecord->data != NULL ){
delete[] (Crgb8*)gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
//DoReadICCProfile ();
static void DoReadFinish (void)
// Dispose of the image resource data if it exists.
DisposeImageResources ();
WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
if( gMxiInfo->lightNamesList[i] != NULL ){
delete[] gMxiInfo->lightNamesList[i];
gMxiInfo->lightNamesList[i] = NULL;
delete[] gMxiInfo->lightNamesList;
gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
delete[] gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
delete[] gMxiInfo->filename;
gMxiInfo->filename = NULL;
if( cMax != NULL ){
delete cMax;
cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] =
((float*)gFormatRecord->data)[ i * 4 + 1 ] =
((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
// Set the layer name.
gFormatRecord->layerName = new uint16[64];
gFormatRecord->layerName[0] = 'B';
gFormatRecord->layerName[1] = 'a';
gFormatRecord->layerName[2] = 'c';
gFormatRecord->layerName[3] = 'k';
gFormatRecord->layerName[4] = 'g';
gFormatRecord->layerName[5] = 'r';
gFormatRecord->layerName[6] = 'o';
gFormatRecord->layerName[7] = 'u';
gFormatRecord->layerName[8] = 'n';
gFormatRecord->layerName[9] = 'd';
gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
void* lightBuffer = NULL;
void* alphaBuffer = NULL;
byte foob;
dword food;
// Get the light buffer.
bool res = cMax->getLightBuffer(
(char*)gMxiInfo->filename,
gFormatRecord->layerData - 1, IMAGE_DEPTH,
lightBuffer,
gMxiInfo->width, gMxiInfo->height, lightName);
if(!res){
*gResult = readErr;
return;
if( gMxiInfo->hasAlpha ){
// Get the alpha buffer.
res = cMax->getExtraBuffer(
(char*)gMxiInfo->filename,
"ALPHA", IMAGE_DEPTH, alphaBuffer,
food, food, foob);
if(!res){
*gResult = readErr;
return;
else{
alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
for( int i = 0; i < nPixels; i++ ){
// Only need to set the red channel.
((float*)alphaBuffer)[ i * 3 ] = 1.0;
// Put them together.
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] = ((float*)lightBuffer)[ i * 3 ];
((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
delete[] (float*)lightBuffer;
delete[] (float*)alphaBuffer;
// Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
*gResult = userCanceledErr;
return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
delete[] (float*)gFormatRecord->data;
gFormatRecord->data = NULL;
if( lightName != NULL ){
delete[] lightName;
lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance. -
I have some magazines subscription on my iphone5S, how can I access the same in my ipad under the same Apple ID?
Well, if it's that annoying to you, I'd go to the nearest apple store, but before you do, you should make reservation to see the genius there. I'm sure they will help you. Just show them where the stuck pixel(s) are.
But honestly, though I don't want to be a downer here, but even if you get it replaced, the possibility that you might get more stuck pixels when you get a new one. But of course, you can also be lucky that you can get a perfect one too. Usually stuck pixels should fix it self (not all the time tho). -
How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.
Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you. -
my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?
That indicates a hardware failure. Read here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm. -
After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ -
How can i see the details of outstanding Vendor Report
Hello,
Can any one tell me how can we see the outstanding Vendor Balance..... Any Tcode for the same ?
Regards,
SAN2008Hi,
T code - FBL1N, and choose open items radio button for the period which you want to view the outstanding balance for a vendor
Hope this resolves your query,
J -
Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
How can I see the windows 8 contacts in outlook 2013 with groups preserved
I an see my windows 8 contacts.
they are all nice and some are broken down into groups.
(I double clicked an old .wab and they imported nicely into windows 8, preserving groups)
now how can I see this same structure as an email lists with groups in outlook 2013? I see the emails, but no groups.
can you help?
thanksThose groups are not supported in outlook - outlook uses a different format for groups. You'll need to import the individual contacts into Outlook and recreate the groups.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
How can i see the contenet of a computer
how can i see the content of a computers shared directory if i know the IP
You obviously are in the wrong place, or you would have stated the problem in a way so as to make sure you were not misunderstood.
Can you say Wrong?
If so, then repeat "I will try to do something right" again and again until you are actually doing so.
You may find the experience rewarding!
Any history or anthropology aficionado will know that it is this kind of gross ambivilence that will speed the imposition of rules that aren't here yet. -
Runtime workbench , how can I see the receipients in the Alert category,
Hi guys,
Alert framework;=>
I have previosly created allert category in runtime wrokbench--->allert configuration.
Also allert rule is created with that allert category.
how can i see the recipients defined for that alert category
appreciate your help
IverHi,
There are two ways one can define the recipients of the configured alerts.
1) Fixed Recipients: - Use tcode ALRTCATDEF and select your alert category and click on fixed recipient. tab
2) Recipients via User Role: It will help you to define alerts recipients via kind of roles they play.
For more help on alerts kindly check the below mentioned links :
alert management Alerts all in one
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60c24b82-6da9-2a10-5a93-f1f729d89787
The specified item was not found. - Alert Configuration
Thanks!
Aditya
Maybe you are looking for
-
My Safari wont start, It just gives an error.
Please help me. My day started off right. I was on Safari in the morning. Then I got a message that updates are avalable so I clicked update. The files that were updated were the following: I am using my powerbook G4 running OS X 10.4.1 PowerPC 1.67
-
Dear Firefox: It's official - I've divorced you
October 11, 2011 Dear Firefox: It has been a long and, up until recently, a very happy marriage between you and me. However, your recent screw-ups have caused me to file for, and finalize, our divorce. This was done without your comment or consent, I
-
OS X wouldn't install after accidentally installing Windows over it
My sister attempted to install Windows XP on her Macbook Pro using boot camp but some how accidentally installed Windows over OS X. I used Disk Utility to erase the drive and reformat it back to "Mac OS Extended (Journaled)" but I get the following e
-
Help configuring adobe media server's apache to use UNC paths and use multible VOD directories
I am experimenting with v 5.03 for media server with look to upgrade our current pool of v4.x server to support ipads etc. i have set the ams conf file and have in the past use a unc paths for my VOD_Dirs eg VOD_DIR = C:\Program Files\Adobe\Adobe Med
-
Everytime I fill out a form when I send it it comes up blank, How do I stop this
Every time i fill out a form and send it the form is received blank what do i do to stop this from happening ?