How can I see who a Blind Copy was sent to AFTER it was sent?

Hello. I often use Blind Copy, BCC, but if I go into my Sent file, it just indicates the first address it was sent to. Is there any way I can go back into my Sent file after the message was sent, and recall all the Blind Copy addressee's?
Thanks for any comments.

I use OS 10.3.9, but I think my reply applies to 10.2.x as well. I assume you are using Apple's Mail program.
I did a test -- sent a message with a bcc. I went too my sent mailbox, and found the message. in the Mail menu, I chose preferences, and then Viewing. In Header Detail, I chose All. The bcc is listed there. Does this work for you?
Frank

Similar Messages

  • My college kids charge on my credit card- how can I see who is charging what?Unlike all other vendors, you can't get info from apple 800 number on the charge

    how can I find out what my college kids are buying on itunes. It is charged to my credit card number but the 800 number given to the credit card company takes me to the web site. I can only see purchases with my own account. Short of cutting off apple as a vendor is there a way to see this? Is there a way to look up purchases by the order number?

    Hello Heidi;
    Are these college kids your kids, or have you allowed details of your credit card to be more freely available?   I can't believe the latter ... but who knows.
    Anyhow; surely the purchases you see are what has been charged to your account.   Assuming you know which of these are yours, the balance has to be that made by the 'College kids'.
    Or is there more to this than meets the eye?

  • How can I see who uses my iTunes shared library?

    Is there anyway I can see who uses my iTunes shared library?
    I'm just curious because I am in college living in the dorms and I just was bored and interested.
    Thanks
    David

    Preferences - Sharing - Status: At least you can see how many users are connected

  • Help, please: how can we see who Tiger mail is keeping out of email?

    I just upgraded to Tiger and I'm noticing I'm getting less email; this is good when it is spam being kept out, but I think it is keeping out some mail I'd like to get... I've added all I can think of to my address book, but I need to see all the emails Tiger is keeping out. How can I do this?
    Thanks,
    Kcat
    iMacG5   Mac OS X (10.4.7)  

    A company I've worked with from the past wrote me via snail mail complaining they could no longer reach me through email as apparently they'd been blocked, but not by me. In fact, I'd temporarily forgotten all about them but because I intend to work with them again at some point, I put their address in my address book to remedy this. It got me to wondering who else might be having trouble getting through. I was hoping to sort this out somehow.
    Thanks,
    Kcat
    iMacG5   Mac OS X (10.4.7)  

  • How can I see who has accessed my files?

    I was recently on an open network and saw that a few of my files had been accessed. Is there a way I can see who?

    Well, it sounds like you have security problems, but the short answer to your original question is no, it's not possible to tell who accessed the files. Disable file sharing unless you really need it. If you do need it, disable guest access. When you're on an untrusted network, definitely disable it, or activate the Firewall and block all incoming connections.

  • How can I see what has been copied to time machine?

    I have set up the way in which I want Time Machine to back up my data but before deleting a large file of photos and music which has been copied from another machine i want to make sure that Time Machine has copied the data. How do I see that this has been done?

    Launch time machine and browse the folders you wish to confirm.  Anything you browse while you're in TimeMachine is part of your backup.

  • How can I see who is hosting the group call before...

    I want to see who's in the call before answering. Is there anyway to do this?

    Welcome to Apple Discussions,
    You are posting in the Mac OS X 10.6 client forum. For questions on 10.6 server post in the server forum: http://discussions.apple.com/category.jspa?categoryID=96
    Good luck!

  • How can I see who's calling a group call?

    Example:Yesterday, I started a group call with two friends. After we hung up, the conversation will stay in "Recent - Yesterday" or something. Today, I was being called back into that group, mening that one of the two friends clicked "Call" on the group.To me, it only says "Friend 1, Friend 2 Calling" or something like that.How can I tell which of my friends are calling, without actually answering?

    It usually just pops up when someone is trying to call you. You can add them and make a conference call, or end the call and take the other call. Not terribly familiar with this.

  • How Can I See Who Is Logged In To My Server

    +I posted this in the wrong forum, so pardon me if you've already read this as I am now re-posting it in the correct forum:+
    I am running Mac OS X Server Snow Leopard 10.6.4 on a Mac Pro (2 x 2.93 Quad Core Xeon, 8GB RAM).
    I figured out how to see how many users are logged in to this server (using the Server Admin application). But I don't know if I can see the names of each user and their traffic usage while they are logged in. How do I do this, if possible.
    Sorry for such a simple question, but I've been Googling for about an hour and I am not getting anywhere. This whole server kind of got dumped on me here at work, and I need all the help I can get.

    Welcome to Apple Discussions,
    You are posting in the Mac OS X 10.6 client forum. For questions on 10.6 server post in the server forum: http://discussions.apple.com/category.jspa?categoryID=96
    Good luck!

  • If a group message doesn't completely go through, how can I see who did not recieve it?

    I tried to send a mass text message (note: I have group messaging turned OFF, but I just used the field where you can send the same message to multiple recipients), however, it came back saying that "Your message was not sent. Tap "Try Again" to send this message." I know that some people recieved the text, as they replied to it, however I'm fairly certain that one or two people did not recieve it. Is there any way to figure out who did not correctly get the message from within the app? Thanks.

    Change your password, alert your credit card company and itunes support.

  • Help.... how can i see who is connected to my itunes

    Hey,
    i am more then happy to allow people to connect to my playlist but i want to know how is it possible to know who is actually connected not just how manny people.
    Thank You

    Can someone help me with my question?

  • HT204023 How can i see who are those connected to my hotspot?

    Sometimes my hotspot go 4-7 connections and I want to know who they are by not asking people around me. Is there any other way?

    Agree that the password is required.  But while using my laptop in the car (I was not driving !), I had the status "2 connections".  So I'm wondering what other device was connected, especially on the highway.
    Is it possible that when another device is trying to connect that your phone shows as one connection, even though the password is not yet entered?
    I get a similar thing in the office, which is more normal since a few devices may be around.

  • How can I see who made my Macbook Pro with Retina Display screen?

    Hello,
    I've read that the LG display burns into the screen. I've done the thing in Terminal "ioreg -lw0 | grep IODisplayEDID | sed "/[^<]*</s///" | xxd -p -r | strings -6" and all it says is Color LCD. Am I doing something wrong? Or does it not say?
    Thanks

    Hello again. Just to be clear, I want to know how to find out if Samsung or LG made my screen.
    Thanks again!!!

  • How can I see who is connected to my Airport Express? Airport utility does not provide it

    Dear community,
    I'm highly surprised by the difficulties to find a simple request… I look on the web, and find some old topic about it, suggesting "Airport Management Tool" which is the old version of the Airport utility on my OSX 10.8.5, so I cannot install it. I have the lasted Airport utiity firmware and software (6.3.1).
    I'm pretty sure Apple have a simple way to do it, without downloading any extra software.
    Thank you for your time, I hope you can help me out.
    Best regards !

    Open Macintosh HD > Applications > Utilities > AirPort Utillty
    Hold down the option key on your Mac while you double click on the icon of your Apple router
    A list of currently connected wireless devices will be displayed
    Click the arrow next to each device to reveal more infomation about the device

  • How do i see who is using my wifi

    How can I see who is using my airport wifi signal?

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Hold down the option key on your Mac while you double click on the AirPort Extrme icon
    Wireless Clients will be displayed. Click the small arrow next to each client for more details on each connection.
    If you see 5 wireless clients.....and you only have 4 wireless devices.....you may have an univited guest on your network.

Maybe you are looking for

  • IPOD blanks on and off

    Please help. Just bought 30GB iPod and thought it was charging, however it now simply flashes from a color apple icon in the middle of the screen, to a black and white one, then to a blank screen while making a quick sound like it is powering down. A

  • Scary problem! Old photos suddenly dark, low resolution.

    Going through some old pictures I've just noticed that 3-4 sets from 4 years ago have become very dark and lower resolution. The weirdest part is that they are not complete "sets" -- that is, the darkness seems to in random groups of certain sets (i.

  • Dataload error after refresh partitionned data

    Hi, I need some help about a problem : I have a replication partition and in the process, there is a dlr to load some data to the target cube after a process of replicated data. I have this error : ERROR - 1003069 - Data Load Error: No data is loaded

  • Canon VIXIA HF R500 - 'Task in Progress'

    Each time the camera is turned on, the camera comes on as normal then after a couple of seconds I get the following message 'Task in Progress.  Do not disconnect power source.'  The camera will turn on after this message and I am unable to restart th

  • Is the new iTunes format differ each countries?

    Is the new iTunes format differ each countries?