How can I select a printer in the moment when I want to print a report?

Hi,
I don't know is there are a way that when I want to print a report, appears a window where I can select a determinated printer in a list? Like when I print in Word that can call a window where appears all teh printers instaled in Windows and the I can select one. Anyone can help me please?
Thanks

You may do it by creating a LOV in your report-invoking env. to select the wanted printer and pass it to Reports. An example of doing it in Apex ....
http://1.2.3.209/dev60cgi/rwcgi60?repdevi_key&server=Rep60_devi&report=myrpt.rdf&DESFORMAT=PDF&DESTYPE=PRINTER&DESNAME=hp2100&BACKGROUND=YES&P_1=....
Or you may do it in Reports using Parameter Form.

Similar Messages

  • How can I select multiple clips in the event browser?

    I can't seem to figure out how to do something that should be pretty simple. I want to select multiple clips in the event browser that aren't next to each other. Right now it's only letting me select the two clips with every other clip in between. Is there a keyboard function that will allow me to deselect the clips in between while leaving the two on the outside selected? In Apple's finder you can do this with files by holding down shift-command while clicking on the ones you want. Or is there away to rearrange clips in the event browswer?
    I'd like to be able to create a multicam clip, but there is always going to be other media in between the clips I want to combine, so how can I select only the clips I want?
    Thanks!

    Holding the Command key should let you select non-contiguous items, just as in the Finder.

  • How can I select a subset of the apps in iTunes to load to an iPod Touch

    My kids have collectively downloaded more apps to iTunes than will fit on thier iPod touchs. How can I select a subset of those apps to load to a particular iPod touch?

    Open itunes, connect ipod, go to apps tab, select what you want to sync, sync.
    iPod touch User Guide (For iOS 5.0 Software)

  • New owner here.  How can I select specific pages of a document found on line and print just those pages.  What I see is the ability to select only 1 page at a time and print that one selected page only.   Thanks much.

    New owner here.  I see that in printing I can select one page and print same.  How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time.  Thanks much

    Just change the range as illustrated below.  If you don't see that, click the Show Details button.

  • If I have a document that is 10 pages and I only want to print pages 2.4.6 how can i select just those. The selection button is grayed out

    i want to print only selected pages not the whole document.. HELP

    Firefox allows printing of a'' range of pages'', for example, page 2 to 5. But not a non-contiguous set of pages.
    Firefox allows you to print a ''selection'', but by that Firefox means the part of the page you selected with the mouse or keyboard, so again, a continuous range.
    If you don't want to print 3 times, I suggest using a PDF printer driver as an intermediary. Then you can print any individual pages you like using the much more full-featured print dialog in Adobe Reader or Adobe Acrobat.
    If you do not have one, here are two free PDF printer drivers I have used:
    * PrimoPDF - http://www.primopdf.com/
    * PDF Creator - http://www.pdfforge.org/pdfcreator
    If you are just printing for quick reference and don't mind a "trial edition" banner on your PDF, I really like this one due to its handy preview-before-save feature:
    * pdfFactory - http://fineprint.com/pdf/

  • How can I select multiple files in the Import grid view in LR4?

    So far the only way I have discovered is to laboriously click the checkbox on each image I want to import. It seems that one should be able to select a range with one click (e.g. holding down Shift and then clicking the last image in the range) or by using a context (right-click) menu. No dice. What gives?

    I think two differeng groups of developers on two different planets designed the Library vs the Import views -- they sure are different!!
    I can answer your question because I had the same question and spent weeks clicking each individually.
    First ignore the checkboxes.  Then use click, ctrl+click, shift+click to select the thumbnails (NOT the Checkboxes, which is why I said to forget them for now!!)
    When you have selected what you want, find one of the selected photos and click its checkbox one way or the other, each click selects or deslects all the "selected" photos.

  • When closing firefox with multiple tabs open, how can you make it keep all the tabs when you reopen firefox

    When i pull firefox back up i want all my tabs to appear in seperate tab windows.

    Go in menu->options->options->select "General" tab and here in "When firefox start" change the option.

  • How can I delete an adress that appear automatically when I want to write an email

    Je semble recevoir des polluriels à une adresse que j'aimerais supprimer de ma liste.  Cette adresse n'est pas dans mes contacts,  mais quand j'envoie un courriel,  si je tape les premières lettres de l'adresse,  elle apparait dans les choix.
    I receive undesirables emails to a particular adress that I would like to delete.  This adress is not in my adress book,  but if I write the first few letters on the line "To",  it appears automatically.  How can I delete it?
    Thank you,
    Message was edited by: danielesimoneau

    Delete it in 'Previous recipients' in Mail.

  • How can I select a channel on the RT target with a VI on the host?

    Maybe I'm trying to pound a square peg into a round hole, so please let me know if I'm abusing LV, but ...
    I'm trying to parameterize our RT VI app that deals with digital output channels.  We use the same basic VI for multiple configurations.  The only thing that changes is the channel allocations.  So for instance, actuator 1 is on port0/line5 for one configuration and port1/line2 in another.  I really don't like the idea of modifying the VI every time we have a new configuration because it makes configuration management insane.  If I make a change to the basic VI, now I have to upate N copies of the VI and hope I catch everything.
    So I'm making the main app VI read an XML configuration file that specifies all the allocations.  Sounds great at first, but how do I create the XML file?  I created a VI that manages the data in the VI, allowing the user to add/remove channels and edit the name and channel and then save it to an XML file.  The configuration is comopsed of an array of clusters, with the cluster containing the name and DAQmx channel.  My intent was to let the user select the channel from the list of valid channels by using the DAQmx Global Channel control.  But the problem is, the configure VI runs on the host, which doesn't see any of the channels because they are on the RT target.  But if I try to run the configure VI on the target, it refuses to deploy because I have GUI widgets.
    Is my approach fundamentally flawed?  Is there a better way of parameterizing our VI?  Or is there a trick to getting access to the valid channels on the host VI?  The information MUST be available because after all, when I modify a target VI and select a global channel constant, I'm doing this on the host.
    Thanks,
    Keith.

    Hi Keith,
    you can handle the channels like "normal" strings. See the attached picture.
    Hope it helps.
    Mike
    Message Edited by MikeS81 on 07-25-2008 06:46 AM
    Attachments:
    Unbenannt1.PNG ‏6 KB

  • How can I select a colour from the colour 'wheel'

    I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
    Regards
    Jenny

    Jenny,
    How would the Color Picker suit you?
    You can DoubleClick the Fill or Stroke (hollow) square in the Toolbox or the Color palette.

  • How can I get Firefox to include the http when copying and pasting from the address bar?

    I know you can use "browser.urlbar.trimURLs" in about:config to re-enable the display of "http://" on URLs in the address bar, but I think there's an actual bug with hiding them in the address bar that should be corrected:
    When I click and drag in the address bar to select part of an address, including the beginning of the address, then use CTRL+C to copy it, and CTRL+V to paste it into something else, the pasted URL does not include "http://"; this is often inconvenient and will break in certain forms and so on.
    In Chrome--where I guess the http-hiding feature was copied from--if you click and drag to select part of the URL including the beginning, then copy, when you paste, the "http://," hidden in their address bar, *is* included. That's how it *should* work. Firefox's implementation is incomplete and frustrating.

    This is a known problem and should be fixed in Firefox 8.<br>
    See https://bugzilla.mozilla.org/show_bug.cgi?id=668019<br>

  • How can I "selectively" accept or reject calendar conflicts when synch blkbry to outlook?

    When I synch my calendar details list those items that will be added - deleted - etc.  What if I only want to accept some of them?  Seems to be no option other then accept (all) or not.  HELP.

    I can't seem to do this successfully. I use the GAL to select the room, but when I send out the meeting I immediately get an automated response back that the delivery failed. I heard this may be because the iPhone OS does not distinguish between a normal attendee and a resource. Yet you seem to have it working. What version of Exchange are you using. Is it on Mac or PC?  We are about to upgrade from Exchange 2003 to 2010, maybe that will help solve this?
    Also, (this may just be semantics) on the iPhone under "Mail, Contacts, Calendars" the Exchange configuration is set to "on" to sync calendars. Is this the same as having the Exchange calendar "set as the default calendar" mentioned above?

  • HT2729 how can I access music downloaded in the cloud that I want to remove ? It only appears to hide it.

      When I select the music I wan to remove the only option is to hide it.  Please tell me if there is a way to login to the cloud so I can remove it there.
    Thanks!

    See http://support.apple.com/kb/HT4919.  Also make sure in Settings>iTunes & App Store that Music is on under Show All.

  • How can I active a trigger on the stage when it is overlayed by a transparent element?

    I'm looking for a way to activate a trigger that is masked by another layer.   The context is that I'm building a prototype with rollovers in the navigation.  Right now, I have it functioning with 4 layers, but it strikes me that there's an easier way.  Here's the current setup, from top to bottom
    Transparent buttons over each nav item, used as triggers.  On click they move the state down the timeline, and b) on mouseover and mouseout, they turn on/off the rollover states in layer 3.
    Nav text PNG, with a transparent background.
    Rollover states under each nav item.  These are rectangles that are shown/hidden by the mouseover and mouseout triggers in layer 1 
    Background to the nav.
    The easier way to do this would be to eliminate layer 1 and add the triggers to the rollover states in layer 3.  (This would also involve adjusting transparency rather than hiding/showing each rollover.)   BUT there's a transparent PNG over the rollover images, and that is preventing them from executing any triggers.  Is there a way around this? 
    Thanks!
    Chassy

    Hi,
    I am attaching 3 vi where Main vi calls the sub vi when Start Sub vi button is pressed. You can also stop your sub vi by pressing Stop Sub Vi button.
    I hope this helps. Incase of any problem, pl. get back.
    Best Regards,
    Nirmal Sharma
    India
    Attachments:
    Main_Vi.vi ‏27 KB
    sub_vi.vi ‏14 KB
    global_stop.vi ‏6 KB

  • How can I set a Boolean LED the moment a trigger occurs on PFI-0

    I want to turn on a front panel LED soon as I get a trigger.
    Please see attachment.
    Solved!
    Go to Solution.
    Attachments:
    trigger indicator.vi ‏44 KB

    dhardy41 wrote:
    Thanks LABMAT, that worked out great!
    If you really wanted to thank him you would give him kudos and/or accept his post as the answer to the topic.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Maybe you are looking for