How can I send an SMS message to a group?

I cannot seem to figure out how to add a second recipient to the SMS message. I routinely beep out messages to the 5 people I work with, I'd hate to send it out to each separately.

At this time, multiple recipient SMS messaging is not supported on the iPhone.

Similar Messages

  • How can i send multiple sms from my iphone 4

    how can i send multiple sms from my i phone 4

    Turn Group Messaging (instructions in lin that follows) off and send the message to multiple recipients. The result may be dependent on your carrier. If manually keying in numbers rather than using contacts, use the return key after each number. http://support.apple.com/kb/HT5760

  • I am currently abroad in France, and I can not send any SMS messages.

    I am currently abroad in France, and I can not send any SMS messages. iMessages works fine. I have checked the setting, and message sending to SMS is activated. I have also reset my phone. Could you advise on why I can not do this please?

    Hi 
    It could be a case that the network you are connected to is having problems.
    If you go to Settings > Carrier > Turn off Automatic > This will prompt the device to do a manual search. Once completed chose a different network and test.
    Also is it a particular number it's failing to or have you tried a few?
    Let me know how you get on.
    Thanks. 

  • How can I send & recieve SMS via Mac ?

    How can I send & recieve SMS via Mac ?
    Handoff is already working fine between my iPhone 5 & Mac, I want to know how I can send & recieve SMS using my MAC

    Thank you so much
    I have another problem please:
    Handoff is working perfectly between my iPhone 5 & my Macbook pro, I also can receive calls on my mac and iPhone 5 at the same time, but when I try to make calls from my laptop it says that message:
    I am already using the same account for both of them

  • How can I delete Skype SMS messages from my I-Pad?

    How can I delete Skype SMS messages from my I-Pad?

    This is a user-to-user forum. Everyone here is a volunteer. Sometimes it takes longer than two minutes to get answer. Additionally, it's a support forum for Apple products, not Skype. You might get lucky and get an answer, you might not. While you're waiting, why don't you try Skype support?
    https://support.skype.com/en/

  • How can i send an sms to a group

    how can i send an sms to a group

    after you put the first name in there is a little plus sign next to it, tap that and add people.

  • How can I send one sms to a group of people?

    how can I send one sms to a group of people?

    Read the User's Guide which covers basic functionality such as this.

  • How can i send an sms to any mobile without using gsm modem or mobile using

    how can i send an sms to any mobile without using gsm modem or mobile using oracle . note again. without using gsm mobile or modem. again note. i want to send sms 100% free sms. :) is it posible ?

    Hi,
    Check this one.
    http://www.oracle.com/technology/products/ias/portal/point/sms/installation.html
    regards,
    Dipankar.

  • How can i send and receive messages through CAN

    Hi,
    how can i send and receive messages using Vector CAN CARDXL

    As mentioned in this forum post, if you have a dll, this can easily be called from LabVIEW or CVI.
    I also went to the vector website and it does look like they have LabVIEW drivers available for download.
    Peter Flores
    Applications Engineer

  • How can i recover old sms messages which were deleted about a week ago?

    How can I recover older sms messages which were deleted about a week ago? I have tried some software but it only recovers messages from the date deleted not prior.

    You Can't
    sorry Once Deleted
    forever Deleted

  • How can i send an error message at EXIT_SAPMM06E_013 ?

    Hi
    I'm making some validations to Vendor and Partner Functions (table control in 'Partners' Strip) in Creting/Changing Purchase Orders (ME21N/ME22N). 
    I know the suitable user exit is EXIT_SAPMM06E_012 for making validation before saving, but this exit does not has (receive) the table with Partner Functions so i could validate them.
    Then I use the Exit _013, wich executes when saving the PO, because this exit has the captured Partners table (XEKPA).
    But, when i make the validations and try to send a error mesage,  the system shows other message type info (window) like 'The requested object is locked by another transaction' and then another like 'System error (error in method PO_POST)'.
    I think this it's because the exit _013 is better suitable to make customer updates and not validations, that it's because just passing by MESSAGE Ennn(cc) command makes the methods catch my error and send other errors and close the transaction.
    Does somebody can help me ??
    How can i send error messages in exit _013 ??
    Or is this incorrect ??
    Or in wich User Exit can i validate the Partner Functions ??
    I really will aprettiate if somebody can help me, because i'm delayed with my development !!
    Regards

    Hi Frank,
    The eror message you are getting seems to be coming from somewgere else and may be due to the same PO being cahnged in another transaction or have you put some code in BADI ME_PROCESS_PO ( Method POST) .
    You can try by commenting out the code in EXIT 13 .
    If this does not work then use EXIT 12 only and below is the code you can use to access XEKPA in exit 12.
    DATA IT_EKPA LIKE EKPA OCCURS 0 WITH HEADER LINE.
    DATA NAME(50) VALUE '(SAPLMEPO)XEKPA[]'.
    DATA NAME1(50) VALUE '(SAPMM06E)XEKPA[]'.
    FIELD-SYMBOLS <F1> TYPE ANY .
    IF SY-TCODE+4(1) = 'N'.
    ASSIGN (NAME) TO <F1>.
    ELSE.
    ASSIGN (NAME1) TO <F1>.
    ENDIF.
    IT_EKPA[] = <F1>.
    ( Now you have the data in IT_EKPA table which you can use to validate )
    Cheers

  • How Can I Send A Video Message To More Than One Pe...

    I have been trying to send a video message to two or three people on my contact list.  Is it possible to do this by adding a name to the list on the message or can I send the same message to a second person after sending it to the first?  Or do I have to record a second and third message, if I want to send it to 2 or 3 people on my contact list?

    Thank you so much, will do it.
    Happy Holiday Season!

  • How can i send an sms from my ipad mini?

    I finally got my nano-sim card today and would like to be able to text and recieve sms-messages from people who aren't hooked up with iMessage. I can't find any infos in the handbook on sending a simple sms. How do I go about doing that or setting up this feature?
    Thanks.
    -Kim

    About Messages
    http://support.apple.com/kb/HT3529
    Activating FaceTime and iMessage
    http://support.apple.com/kb/TS4268
    Trouble-shooting iMessage
    http://support.apple.com/kb/ts2755

  • How can I send just 1 message for 2 mail accounts under mail forwarding

    Hi everyone
    I have a question for mail forwarding.
    I have 2 inbound mail servers,4 outbound servers and many store servers.
    User A set his mail forwarding address to B, and B set his mail forwarding address to A.
    So 2 guys can receive each others message.
    In this case, If two users have same "mailhost' value(ex, x.test.com), forwarding mail goes just once for each accounts.
    If "mailhost' values , however, are different (ex, x.test.com and y.test.com - and also two mail servers connected as internal server),
    forwarding mail goes 4 times for each accounts.
    So sender gets 4 messages and receiver gets 5 messages.
    How can I set mail server configuration to send just once not 4 times for 2 users?
    Any advices would be welcomed.
    Thanks
    Message was edited by:
    1231dugi
    Message was edited by:
    1231dugi

    Hi,
    User A set his mail forwarding address to B, and B
    set his mail forwarding address to A.
    So 2 guys can receive each others message.You have just created a mail loop. This is not a good thing.
    Any advices would be welcomed.I would advise creating a mailing list which has both userA and userB as members, and then have emails sent to that address OR have a third account which they can both access (IMAP shared folders) and have email sent to that OR have them share each-others INBOX.
    The fact that userA & B didn't get multiple copies when they were on the same mailhost is due to good luck only.
    Shane.

  • How can I send an SMS in my BB?

    I live in the philippines, my mother sent me a BlackBerry 9630, I can"t seem to find the "Send a SMS". PLEASE HELP
    BTW. I am just new here HELP ME

    Hey come_inside,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Go into Text Messages and press the menu key and select Compose Text Message. Once completed press menu>send.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

Maybe you are looking for

  • UK payroll - second line support

    Hi Guys, I am assigned Uk payroll second line support... Am looking for some regular issues in UK payroll... can some body help me? What are the other areas that I should focus on? Regards Sirisha

  • Invalid data found when base64 decoding a String

    When I tried to start my server, my server stops automatically. Following are my server0 logs when the server0 stopped automatically when I tried to start my WEB-AS. <!LOGHEADER[START]/> <!HELP[Manual modification of the header may cause parsing prob

  • How to fit all browser screen?

    Hi, I designed a webpage by using iweb. I used HTML snippet to input my HTML code. However, different screen resolution PC or browser will display my webpage size and layout differently. Any idea how to solve this? Besides, I noticed that webpage cre

  • How do I save Home Videos on DVD to Macbook Pro?

    So I got deleted before because Apple decided that I was using "TOAST 8.0" to make copies of DVDs. I just want to take my work VIDEO STORIES and transfer to IMOVIE or some other 3rd party program. Again I used TOAST and audio and video was out of syn

  • Sony 46" LCD country of origin

    In my internet research, I have not been able to determine where any of the 46 inch Sony Bravia LCD televisions are manufactured.  A local Samsung distributor told me to avoid the XBR6 model, because it is made in China and parts are not available in