How can I send data from multiple range with VBA API ?

hello everyone,
i have one worksheet , multiple range. With addin , we can specified the range to retrieve or submit.
In smart view  for retreive, I have the API retrieverange so  I can do the same. But for submitting data, I only have the API "HypSubmitData" and it doesn't take any paramater like a rangebut only the sheet !
So how do you manager to do it ? one worksheet per range ?
thanks for answers

11.1.2.5.400 added the capability to perform range submission, however I doubt that the vba is not updated with the function. So you might have to wait for a while, or you can create a code which copied the selected cells to a hidden worksheet and perform submit from that sheet. Keep in mind that when the use make the selection, you'll have to copy the pov too.
Regards
Celvin Kattookaran

Similar Messages

  • How can I take data from multiple pages documents and put them into a numbers table?

    I produce invoices in pages, with dates, invoice numbers, references and amounts due. I want to take all this data from multiple documents and transfeer it to a single numbers table. Is this possible and if so, how do I do it. I know I can do it the other way round with mail merge but I can't figure out how to do it this way round?
    Thanks,
    Keith

    The data is spread throughout a pages document in specific areas here's a copy of an invoice for you to have a look at.

  • How Can I Send Data From One Pc To Another Using An Ethernet Connection ?

    Hi,
    I would Like to know how to send data ( For example, any String ) from a Server Pc to a Client Pc, Using the same java program installed on both computers.
    [Pc One ( Server ) [ Java Program] ] <----Ethernet--Cable----> [Pc Two( Client ) [ Java Program] ]
    Thanks .
    Edited by: jaysal2490 on Jul 7, 2008 9:45 PM
    Edited by: jaysal2490 on Jul 7, 2008 9:46 PM
    Edited by: jaysal2490 on Jul 7, 2008 9:51 PM

    Check out this tutorial:
    http://java.sun.com/docs/books/tutorial/networking/sockets/index.html
    There are code samples included.

  • How can I send data from a Comp to a Service?

    Hello!
    I have written a simple service, it works fine, i can receive data from it, but i need also to send data to the service.
    I have tried this:
    part of the code of my service:
    public void addUser(String UserName) {
                   UserList[number_user] = UserName;
                   number_user++; 
    part of the code of my comp:
    IszerdService myService = (IszerdService) PortalRuntime.getRuntimeResources().getService(serviceName);
    myService.addUser("Superman");
    could you show me what is the most simple way to send data to a service, and store in the service?
    thank you all!
    Istvan

    Hi Subathra,
    > Where do u face problem? Did u get any error while
    > le passing the data to the service? What's that?
    Actually I cant deal with putting data into the String Array of my service.
    Now I have solved the problem by using HashTable instead of String[] and the .put(key, object) method works fine, the data is delivered to the service succesfully.
    Regards,
    Istvan

  • In ADF how can i insert data in multiple table if they have foreign key

    I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
    Thnak you very much.

    Hello,
    Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
    1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
    2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
    3> i made that association composite by clicking the checkbox
    4> i created 2 VO from 2 EO.
    5> put those VO in Application Module.
    6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
    Now what to do please?

  • How can get formatted data from hard drive

    how can get formatted data from hard drive?

    No chance without special tools/knowledge. There are companies that can do it, unless you use multiple format or rewrite data with special erase ustility or unless you have done low level format.
    Regards
    Milos

  • How can i send mails from SAP?

    how can i send mails from SAP?
    what are the configurations i have to do in SAP for that?
    pls give me a detail reply......
    if possible, pls give me the sample ABAP program for that.

    recently i have worked on a similar requirement here is the sample code for that
    REPORT ZDOC_AS_EMAIL_3.
    *& Report ZEMAIL_ATTACH *
    *& Example of sending external email via SAPCONNECT *
    TABLES: ekko.
    PARAMETERS: p_email TYPE somlreci1-receiver.
    TYPES: BEGIN OF t_ekpo,
    ebeln TYPE ekpo-ebeln,
    ebelp TYPE ekpo-ebelp,
    aedat TYPE ekpo-aedat,
    matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
    wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
    ebeln(10) TYPE c,
    ebelp(5) TYPE c,
    aedat(8) TYPE c,
    matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
    WITH HEADER LINE.
    DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
    WITH HEADER LINE.
    DATA: l_t_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
    t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
    t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    w_cnt TYPE i,
    w_sent_all(1) TYPE c,
    w_doc_data LIKE sodocchgi1,
    gd_error TYPE sy-subrc,
    gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
    *Retrieve sample data from table ekpo
    PERFORM data_retrieval.
    *Populate table with detaisl to be entered into .xls file
    PERFORM build_xls_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    *Populate message body text
    perform populate_email_message_body.
    *Send file by email as .xls speadsheet
    PERFORM send_file_as_email_attachment
                        tables it_message
                                it_attach
                            using p_email
        'Example . xls documnet attachment'
                                     'XLS'
                                'filename'
                        changing gd_error
                              gd_reciever.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    PERFORM initiate_mail_execute_program.
    *& Form DATA_RETRIEVAL
    *Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
    SELECT ebeln ebelp aedat matnr
    UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
    ENDFORM. " DATA_RETRIEVAL
    *& Form BUILD_XLS_DATA_TABLE
    *Build data table for .xls document
    FORM build_xls_data_table.
    *CONSTANTS: con_cret(2) TYPE c VALUE '0D', "OK for non Unicode
    *con_tab(2) TYPE c VALUE '09'. "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    class cl_abap_char_utilities definition load.
    constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.
    CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
    INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
    LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
    wa_charekpo-aedat wa_charekpo-matnr
    INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
    ENDLOOP.
    ENDFORM. " BUILD_XLS_DATA_TABLE
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    *Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                           using p_email
                                                p_mtitle
                                                p_format
                                              p_filename
                                        p_attdescription
                                        p_sender_address
                                    p_sender_addres_type
                                        changing p_error
                                              p_reciever.
    DATA: ld_error TYPE sy-subrc,
    ld_reciever TYPE sy-subrc,
    ld_mtitle LIKE sodocchgi1-obj_descr,
    ld_email LIKE somlreci1-receiver,
    ld_format TYPE so_obj_tp ,
    ld_attdescription TYPE so_obj_nam ,
    ld_attfilename TYPE so_obj_des ,
    ld_sender_address LIKE soextreci1-receiver,
    ld_sender_address_type LIKE soextreci1-adr_typ,
    ld_receiver LIKE sy-subrc.
    ld_email = p_email.
    ld_mtitle = p_mtitle.
    ld_format = p_format.
    ld_attdescription = p_attdescription.
    ld_attfilename = p_filename.
    ld_sender_address = p_sender_address.
    ld_sender_address_type = p_sender_addres_type.
    *Fill the document data.
    w_doc_data-doc_size = 1.
    *Populate the subject/generic message attributes
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name = 'REPORT'.
    w_doc_data-obj_descr = ld_mtitle . "mail description
    w_doc_data-sensitivty = 'F'.
    *Fill the document data and get size of attachment
    CLEAR w_doc_data.
    READ TABLE it_attach INDEX w_cnt.
    w_doc_data-doc_size =
    ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name = 'SAPRPT'.
    w_doc_data-obj_descr = ld_mtitle.
    w_doc_data-sensitivty = 'F'.
    CLEAR t_attachment.
    REFRESH t_attachment.
    t_attachment[] = pit_attach[].
    *Describe the body of the message
    CLEAR t_packing_list.
    REFRESH t_packing_list.
    t_packing_list-transf_bin = space.
    t_packing_list-head_start = 1.
    t_packing_list-head_num = 0.
    t_packing_list-body_start = 1.
    DESCRIBE TABLE it_message LINES t_packing_list-body_num.
    t_packing_list-doc_type = 'RAW'.
    APPEND t_packing_list.
    *Create 1st attachment notification
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 0.
    t_packing_list-head_num = 1.
    t_packing_list-body_start = 1.
    DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    t_packing_list-doc_type = ld_format.
    t_packing_list-obj_descr = ld_attdescription.
    t_packing_list-obj_name = ld_attfilename.
    t_packing_list-doc_size = t_packing_list-body_num * 255.
    APPEND t_packing_list.
    **Create 1st attachment notification
    *t_packing_list-transf_bin = 'X'.
    *t_packing_list-head_start = 0.
    *t_packing_list-head_num = 1.
    *t_packing_list-body_start = 1.
    *DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    *t_packing_list-doc_type = ld_format.
    *t_packing_list-obj_descr = ld_attdescription.
    *t_packing_list-obj_name = ld_attfilename.
    *t_packing_list-doc_size = t_packing_list-body_num * 255.
    *APPEND t_packing_list.
    **Create 2nd attachment notification
    data: x type i.
    DESCRIBE TABLE t_attachment LINES X.
    append lines of it_attach to t_attachment.
    data: start type i,
          end type i,
          cal type i.
    start = X + 1.
    describe table t_attachment lines end.
    cal = end - start.
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 0.
    t_packing_list-head_num = 1.
    t_packing_list-body_start = start.
    t_packing_list-body_num = end.
    *DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    t_packing_list-obj_descr = 'Eng Change'. "ld_attdescription.
    t_packing_list-doc_type = ld_format.
    *t_packing_list-obj_name = 'Eng' .
    t_packing_list-doc_size = t_packing_list-body_num * 255.
    APPEND t_packing_list.
    *Add the recipients email address
    CLEAR t_receivers.
    REFRESH t_receivers.
    t_receivers-receiver = ld_email.
    t_receivers-rec_type = 'U'.
    t_receivers-com_type = 'INT'.
    t_receivers-notif_del = 'X'.
    t_receivers-notif_ndel = 'X'.
    APPEND t_receivers.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
    document_data = w_doc_data
    put_in_outbox = 'X'
    sender_address = ld_sender_address
    sender_address_type = ld_sender_address_type
    commit_work = 'X'
    IMPORTING
    sent_to_all = w_sent_all
    TABLES
    packing_list = t_packing_list
    object_header = l_t_objhead
    contents_bin = t_attachment
    contents_txt = it_message
    receivers = t_receivers
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    *Populate zerror return code
    ld_error = sy-subrc.
    *Populate zreceiver return code
    LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
    ENDLOOP.
    ENDFORM.
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    *Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
    WAIT UP TO 2 SECONDS.
    SUBMIT rsconn01 " WITH mode = 'INT'
    "WITH output = 'X'
    AND RETURN.
    ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
    *& Form POPULATE_EMAIL_MESSAGE_BODY
    *Populate message body text
    form populate_email_message_body.
    REFRESH it_message.
    it_message = 'Please find attached a list test ekpo records'.
    APPEND it_message.
    endform. " POPULATE_EMAIL_MESSAGE_BODY

  • How can I send stuff from one iPhone to another via Bluetooth?

    How can I send stuff from one iPhone to another via Bluetooth?

    There are some apps that will let you send photos from one iOS device to another over BT.

  • Can we merge data from multiple sources in Hyperion Interactive Reporting ?

    Hi Experts,
    Can we merge data from multiple sources in Hyperion Interactive Reporting ?Example can we have a report based on DB2
    Oracle,
    Informix and Multidiemnsional Databases like DB2,MSOLAP,ESSBASE?
    Thanks,
    V

    Yes, Each have their own Query and have some common dimension for the Results Sections to be joined together in a final query.
    look in help for Creating Local Joins

  • How can I send email from my yahoo alias account in iPhone5 mail?

    How can I send email from my yahoo alias account in iPhone5 mail?
    I have 2 email accounts: [email protected] is an alias of [email protected]
    In my old iPhone3 I had these accounts set up so that I could send and receive email from both accounts. I did this using the following settings:
    ‘Other’ POP account info:
    Name: xyz
    Address: [email protected]
    Description: alias
    Incoming mail server:
    Host name: pop.mail.yahoo.com
    User name: [email protected]
    Password: password for yahoo account
    Server port: 995
    Outgoing mail server:
    SMTP: smtp.o2.co.uk (o2 is the name of my phone network)
    Server port: 25
    ‘Yahoo!’ account info:
    Name: xyz
    Address: [email protected]
    Password: password for yahoo account
    Description: Yahoo!
    Outgoing mail server:
    Primary server: Yahoo! SMTP server
    Server port: 465
    I’ve tried using the same settings in my new iPhone5, but it doesn’t work. I can receive mail to both accounts, and can send from the Yahoo account, but I cannot send mail from the alias account. When I try, it displays the message: “Cannot send mail. A copy has been placed in your Outbox. The recipient ‘[email protected]’ was rejected by the server”.
    I’ve tried to configure the POP alias account using combinations of ‘pop.mail.yahoo.com’, ‘pop.mail.yahoo.co.uk’, ‘apple.pop.mail.yahoo.co.uk’ and ‘apple.pop.mail.yahoo.com’, for the incoming host, and ‘smtp.o2.co.uk’, ‘smtp.mail.yahoo.com’, ‘smtp.mail.yahoo.co.uk’, ‘apple.smtp.mail.yahoo.com’ and ‘apple.smtp.mail.yahoo.co.uk’ for the outgoing mail server. None of these have worked.
    I’ve also tried setting it up using IMAP instead of POP without success. I tried configuring it using combinations of ‘imap.mail.yahoo.com’, ‘apple.imap.mail.yahoo.com’, ‘imap.mail.yahoo.co.uk’ and ‘apple.imap.mail.yahoo.co.uk’ for the incoming mail server and ‘smtp.o2.co.uk’, ‘smtp.mail.yahoo.com’, ‘smtp.mail.yahoo.co.uk’, ‘apple.smtp.mail.yahoo.com’ and ‘apple.smtp.mail.yahoo.co.uk’ for the outgoing mail server.
    Yahoo say that if I can't send Yahoo! Mail from my mail program, I may be accessing the Internet through an ISP that is blocking the SMTP port, and that if this is the case, I should try setting the SMTP port number to 587 when sending email via Yahoo!'s SMTP server. I don't think that this is the problem, but I tried it just to make sure - without success.
    I’ve also heard that the problem might have something to do with the SPF settings of my alias domain provider. I’m not too sure exactly what SPF settings are, or how to change them, but from what I can gather it seems unlikely that this is the problem given that I was able to send mail from my alias account on my old iPhone3.
    Any help much appreciated: how can I get my alias account to send emails in iPhone5 mail?
    Many thanks,
    Patrick

    A new development: I've tried sending emails from the alias several times over the past 24 hours, but in general I've deleted them if they haven't sent within about half an hour.
    However, one of the messages I left sitting in the outbox did send successfully in the end, but this took about an hour.
    So: perhaps my problem is not in fact that I am completely unable to send mail from my alias, but that I can only do so intermittently and extremely slowly, and by ignoring the "cannot send" message.
    Any help appreciated.

  • How to get the data from multiple nodes to one table

    Hi All,
    How to get the data from multiple nodes to one table.examples nodes are like  A B C D E relation also maintained
    Regards,
    Indra

    HI Indra,
    From Node A, get the values of the attributes as
    lo_NodeA->GET_STATIC_ATTRIBUTES(  IMPORTING STATIC_ATTRIBUTES = ls_attributesA  ).
    Similarily get all the node values from B, C, D and E.
    Finally append all your ls records to the table.
    Hope you are clear.
    BR,
    RAM.

  • How can I modify data from a Transparent Table without ABAP code.

    Hi,All
    How can I modify data from a Transparent Table (like TCURR),  and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
    I had fond that there is a way can do that:
    1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
    2, type '/h' and let debugging on
    3, select one of this data then click 'Display',enter in debugging system.
    4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
    and, My system is ECC6.
    thank you all
    Edited by: xuehui li on Aug 20, 2008 6:30 PM

    Hello,
    Your approach (with Vijay's suggestion) MAY work.  However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT.  This will be especially true if you are working in a Production environment.  Vijay's other comment is true as well.  This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment.  The auditors will not be impressed.
    Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
    Regards
    Greg Kern

  • How can you transfer data from one ipod to another ?

    How can you transfer data from one ipod to another ipod ?

    The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device."  Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • How can I get Data from the Sound cart in Labview? Does a VI exist?

    How can I get Data from the Sound cart in Labview? Does a VI exist?

    Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
    Khalid

Maybe you are looking for