How can i send MIDI clock out of logic 9 to hardware synths ?

Hello !
I would like to send out midi clock from Logic 9 to my hardware synth.
Are my MIDI setting set up right ? I have attched some images below.
Hope someone can help.......?!?!

Create a few "External MIDI Tracks"
Was exactly was what I was looking for - thanks, Pancenter!
I didn't realize that this was available.  I was attempting to make pre-existing MIDI tracks into External MIDI Tracks; when it has to be initialized from the setup.
I've been able to get my keyboard to be played using your suggestion.
Again your expertise & assistance has been appreciated here, Pancenter!

Similar Messages

  • How can you send an email out to more than 65 persons at a time?

    I have an email notification list of 175 persons who regularly get communications from me. I have recently discovered that only 65 of them are getting these emails. How can I send to my entire list?
    Thanks!

    Is the list stored on a server or in Thunderbird?
    I'm not aware of a limit to the number of recipients of a message in Thunderbird when you use a list. A limit may be imposed by your service provider as an anti-spam measure. You may want to search around to learn more about any limits there.

  • How can I send out a voice memo by iphone 6 plus?

    How can I send out a voice memo to my friend? the voice memo last around 1.5 hours.  I tried to sent by email but not success.
    Pls. help.

    It is not Family Sharing - it is Continuity. Go to Settings>FaceTime>Cellular Calls, turn them off.
    Cheers,
    GB

  • I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and paste and doing the header separately from the text.

    I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and pasting   the header separately from the text. I know there is a way besides a screen shot but I've spend hours trying to find it.

    Smurfslayer wrote:
    For the particularly persnickety types you might want to expose the full headers in the email message as well.  It's easy enough to do, from mail's 'menu' select "view"; then "message"; then all headers.
    Another option you could use is a screen capture using Grab.
    Activate Grab, then shift + command + w (for a window screen shot).  Then confirm the window selection and click the mail message. 
    Dave
    Why are you addressing this to me...?
    I am not the OP...

  • Im trying to send out a word doc and it tells me I need to set up an account with enterage. I already have my email set up with regular mail? How can I send it out through my email that is active?

    Im trying to send out a word document via email. It tells me it cannot send because I have not yet set up an account with enterage. My email is active already with Apple regular mail program. How can I send it out through reg mail?

    Save the Word document. Create your email in your normal mail application (Mail?), click on the add attachment icon (the paperclip if you are using Mail). Navigate to where you saved the Word file and select it. It should now appear as an attachment in your email. If you are sending it to a PC user and you are using Mail make sure 'Send Windows-friendly attachments' is selected in the edit menu. And if you don't want the attachment to display inline within the body of the email Control+Click on it and select 'view as icon'.

  • HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

    My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

    How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!  I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

    That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar.  I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade.  We tested it with an iPad that had not been upgraded, no problem.

  • Trying to understand how MIDI Clock works in Logic

    Hi,
    I'm syncing a Roland MC-909 Groove Box with Logic.  I'm also using a MOTU MIDI Express interface.  The MC-909 syncs to Logic, thus it is in Slave mode. Under Preferences->Sync->MIDI Sync Project Settings, I've discovered something odd, and I'm trying to understand it.  It could be just a lack of understanding regarding the MIDI Spec.
    Under MIDI Clock, I necessarily need to set the destination to the MC-909.  I cannot use 'All'  or else the MIDI Express starts playing back at 8x the tempo set in Logic.  Not sure why this happens but its probably something weird with the MOTO interface.  Anyway in Logic, MIDI Time Code (MTC) is disabled, Song Position Pointer (SPP) is disabled, and MMC is disabled.
    So basically I'm only sending MIDI Clock to the MC-909.  Here's what is wierd:  As I locate to different places in the Arrange window (not in play mode), the MC-909 is locating to the correct time offset within the pattern!  This basically guarantees that you can start the Logic song anywhere, and the MC-909 will start playing back the pattern at the right time.  I don't understand how this can be happening given that I've disabled SPP in Logic.  The only sync communication between Logic and the MC-909 is MIDI Clock, but I don't believe that MIDI Clock is even capable of transmitting offset information that specifies the time-offset into a drum machine pattern, Does it?  Or is Logic sending SPP info as I click on different locations in the Arrange window?
    Another point, is that if I select to transmit MIDI Clock to another device other than the MC-909, but still using the MOTU MIDI Express, then the MC-909 plays back synchronously (i.e. its getting MIDI Clock from Logic, even though Logic isn't sending MIDI Clock to the MIDI port connected to the MC-909), but it does not track the pattern offset described in the previous paragraph.  The only way I can get the pattern offset to work, is if I select the MIDI Clock to be sent to the MIDI port connected to the MC-909.
    I would like to figure this out because I'm thiinking about buying an external MIDI synchronizer, but I don't want to lose the ability to have logic specify the offset into the pattern on the MC-909
    Thanks,

    Hi,
    I'm syncing a Roland MC-909 Groove Box with Logic.  I'm also using a MOTU MIDI Express interface.  The MC-909 syncs to Logic, thus it is in Slave mode. Under Preferences->Sync->MIDI Sync Project Settings, I've discovered something odd, and I'm trying to understand it.  It could be just a lack of understanding regarding the MIDI Spec.
    Under MIDI Clock, I necessarily need to set the destination to the MC-909.  I cannot use 'All'  or else the MIDI Express starts playing back at 8x the tempo set in Logic.  Not sure why this happens but its probably something weird with the MOTO interface.  Anyway in Logic, MIDI Time Code (MTC) is disabled, Song Position Pointer (SPP) is disabled, and MMC is disabled.
    So basically I'm only sending MIDI Clock to the MC-909.  Here's what is wierd:  As I locate to different places in the Arrange window (not in play mode), the MC-909 is locating to the correct time offset within the pattern!  This basically guarantees that you can start the Logic song anywhere, and the MC-909 will start playing back the pattern at the right time.  I don't understand how this can be happening given that I've disabled SPP in Logic.  The only sync communication between Logic and the MC-909 is MIDI Clock, but I don't believe that MIDI Clock is even capable of transmitting offset information that specifies the time-offset into a drum machine pattern, Does it?  Or is Logic sending SPP info as I click on different locations in the Arrange window?
    Another point, is that if I select to transmit MIDI Clock to another device other than the MC-909, but still using the MOTU MIDI Express, then the MC-909 plays back synchronously (i.e. its getting MIDI Clock from Logic, even though Logic isn't sending MIDI Clock to the MIDI port connected to the MC-909), but it does not track the pattern offset described in the previous paragraph.  The only way I can get the pattern offset to work, is if I select the MIDI Clock to be sent to the MIDI port connected to the MC-909.
    I would like to figure this out because I'm thiinking about buying an external MIDI synchronizer, but I don't want to lose the ability to have logic specify the offset into the pattern on the MC-909
    Thanks,

  • When running a "stand-alone" APP..how do I send midi from Logic?

    Hi all,
    When running a "stand-alone" APP..how do I send midi from Logic?.....Please no IAC stuff it doesn't work.......thanx
    SvK

    using IAC here no problems. works very well.
    you can host your au's in another app such as soundflower or au lab, but you are still going to need to get it to hear midi. you can use physical midi ports with something like a MTP midi interface, and getting the midi by routing the out of one port to the in of another (midi loop) but you have to be careful logic doesn't listen to the same midi signal or everything will jam up (midi feedback).

  • How can I send multiple photos in an email?

    How can I send multiple photos in an email?

    In Photos, when looking at your pictures, click the Action arrow first (upper right), before selecting any pictures.  Then you can tap select the pictures you want to send then click "Share" in the upper left.  From there you can Email.
    If you click and open one picture first, the Action button will only allow you to share that one picture.
    (Yeah, took me a while to figure this out. )
    ivan

  • How can I send a message from database to a J2EE application?

    How can I send a message from database to a J2EE application?
    If I have a codetable in database that has new or modified values I have to refresh the codetable in my J2EE application.
    Most effective way would be send a message to initiate a table reload from J2EE app, but I don't know how to do this.
    Now I have a background thread that regular reads the table and looks for changes.

    http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
    This document details how to create triggers on a table that send out JMS messages.
    In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
    an alternative idea.
    you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

  • How can I send email from my HPEPrint email address

    How can I send email from my HPEPrint email address, to other addresses? Is the HP photosmart 5010 smtp compatible?

    Hello
    The eprint service is only used for incoming emails to the eprint center which then go to your printer, you cannot send out emails from that address.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • How can i send an error message at EXIT_SAPMM06E_013 ?

    Hi
    I'm making some validations to Vendor and Partner Functions (table control in 'Partners' Strip) in Creting/Changing Purchase Orders (ME21N/ME22N). 
    I know the suitable user exit is EXIT_SAPMM06E_012 for making validation before saving, but this exit does not has (receive) the table with Partner Functions so i could validate them.
    Then I use the Exit _013, wich executes when saving the PO, because this exit has the captured Partners table (XEKPA).
    But, when i make the validations and try to send a error mesage,  the system shows other message type info (window) like 'The requested object is locked by another transaction' and then another like 'System error (error in method PO_POST)'.
    I think this it's because the exit _013 is better suitable to make customer updates and not validations, that it's because just passing by MESSAGE Ennn(cc) command makes the methods catch my error and send other errors and close the transaction.
    Does somebody can help me ??
    How can i send error messages in exit _013 ??
    Or is this incorrect ??
    Or in wich User Exit can i validate the Partner Functions ??
    I really will aprettiate if somebody can help me, because i'm delayed with my development !!
    Regards

    Hi Frank,
    The eror message you are getting seems to be coming from somewgere else and may be due to the same PO being cahnged in another transaction or have you put some code in BADI ME_PROCESS_PO ( Method POST) .
    You can try by commenting out the code in EXIT 13 .
    If this does not work then use EXIT 12 only and below is the code you can use to access XEKPA in exit 12.
    DATA IT_EKPA LIKE EKPA OCCURS 0 WITH HEADER LINE.
    DATA NAME(50) VALUE '(SAPLMEPO)XEKPA[]'.
    DATA NAME1(50) VALUE '(SAPMM06E)XEKPA[]'.
    FIELD-SYMBOLS <F1> TYPE ANY .
    IF SY-TCODE+4(1) = 'N'.
    ASSIGN (NAME) TO <F1>.
    ELSE.
    ASSIGN (NAME1) TO <F1>.
    ENDIF.
    IT_EKPA[] = <F1>.
    ( Now you have the data in IT_EKPA table which you can use to validate )
    Cheers

  • No midi clock out on AMT8 ports 4-8

    Hi, Logic 9, with daisy chained Emagic Unitor8's and AMT
    Unitory8->Unitor8->Amt8
    I"m getting midi clock out on all ports except the last 4. Does anyone have a suggestion on how to make this work or if it is even possible?
    - Joel

    Joel,
    If you change the order... is it always the last 4 ports that aren't getting MIDI clock. If you use two devices Unitor8->Amt8, are you getting all 16?

  • How can i send several emails at one time

    Im trying to send an email out to several addresses and im getting a mailer demon message. How can i send this one email to several addresses?

    How many addresses are you trying to send to at once? Normally you can send a message to a reasonable number of recipients at once, but your mail provider may impose limitations.
    What does the mailer message say? Is it bouncing on a specific email address? (In which case, make sure you typed it correctly)
    Matt

Maybe you are looking for