How can i send multiple Key note files attached in one e-mail

I've problem with mail attachment. I want to send multiple files from keynote as 4 attached in one mail. Anyone know how? Do I've to wasting time send it one by one? Your kind advice will be a lot appreciated. Thank you ;)

You can only email one file at a time from the app. Unless you can copy and paste all four files into the email, you can't do it in the Mail App either. There is a third party app called Group Email with Attachments that will allow you to do this. You will have to be running iOS 4 to attach documents I believe.
Message was edited by: Demo

Similar Messages

  • How can I send multiple subcon PPMs to APO since one PV must be in the PIR?

    We often have two or three production versions for a single subcontracting material. For example, PV 01-1 from now until June, then PV 02-1 from June until November. To create the PPM in APO via CFM1/CFM2 we must have one PV in the subcontracing PIR. This means we can only send the currently active PV 01-1 to APO and we can not plan with 02-1 in the future! I know I can manually create this in APO or I can temporarily change the PIR, send the PPM, and then change the PIR back but I would like an automatic process for this.
    Why can't I leave the PV blank in the PIR and that would mean to send ALL PPMs? This is essentially how R/3 planning works... if you leave the PV blank in the PIR it will automatically choose the PV with the correct date ranges.
    I'm sure many people have had this issue but SAP offers no solution. Does anyone know of a user exit or have any ideas on how to resolve this?
    Thanks,
    Eric Strehlow

    Hi Vinodkumar,
    You have desribed the way that I run my process. However, for subcontracting we must also put the PV into the PIR or the PPM creation will have no link from PV to Vendor and therefore it will not create a PPM.
    In R/3 planning, we leave the PV blank in the PIR so the system will automatically choose the correct PV based on the validity dates. I would like to leave the PV blank in the PIR and have APO create PPMs for all Vendors that this material is extended to for each PV. But as far as I know this is not possible. Then APO planning can choose the correct PPM based on validity dates.
    Thanks,
    Eric

  • How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

    how can I send multiple pictures to the Kodak link (under file & then order prints)?  if the photos are not sequential can it be done?

    Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

  • How can I send multiple string commands into a VISA write?

    Hi Fellow LabVIEW users
    I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
    How can I send multiple string commands to a VISA write. For example each string command looks like this
    1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
    2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
    3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
    and so on and so forth. And there are a number of scenarios.
    Each String scenario will give a different string output which will be interpreted differently in the front panel.
    Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
    Thanks, any feedback will help.
    mhaque

    Please stick to your original post.

  • How can i send multiple sms from my iphone 4

    how can i send multiple sms from my i phone 4

    Turn Group Messaging (instructions in lin that follows) off and send the message to multiple recipients. The result may be dependent on your carrier. If manually keying in numbers rather than using contacts, use the return key after each number. http://support.apple.com/kb/HT5760

  • How can I send multiple photos in an email?

    How can I send multiple photos in an email?

    In Photos, when looking at your pictures, click the Action arrow first (upper right), before selecting any pictures.  Then you can tap select the pictures you want to send then click "Share" in the upper left.  From there you can Email.
    If you click and open one picture first, the Action button will only allow you to share that one picture.
    (Yeah, took me a while to figure this out. )
    ivan

  • How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

    How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
    I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
    I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
    Or can I? Does anyone have a solution I don't realize exists?
    Thanks,
    Sowelu

    AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
    Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs";  take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example.  An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

  • How can i send multiple films from iMovie06HD to iDVD? ( iDVD gave me ****)

    After 2 weeks of jerky videos, unexpected shutdowns, multiplex and buring errors i yesterday finally had something. Than i noticed, that the chapters didn't work. Allright, i thought, those 5-min chapter-marks are a mess anyway. I got myself iMovie06HD to finally set the markers myself.
    My Problem: I have got four films to burn on that dvd. Each of which is about half an hour and i want them to be on that dvd as four single films with own chapter menues.
    How can i send multiple films to iDVD from iMovie06HD? All i found was "only send selected clips" which i did but then my four single films arrive at iDVD as ONE whole film, with chapters yes - but there is no way to create a menu with four single films. I tried all i could imagine. I tried to solve the problem by creating four iMovie projects which will also create four corresponding iDVD projects. I tried to export the movies in multiple formats but then the chapter markers seem to be gone.
    I have to admit i'm desperate. I hope i made my problem clear to you and somebody knows a solution. Thank you! Cheers, Matthias

    Just drag and drop each iMovie project on to the iDVD menu - being careful to avoid any of the drop zones.

  • How can I send multiple pics to email from my iPhone 5

    How can I send multiple pics from photos app on I phone 5 to an e mail?

    Open the album or event folder on your iPhone.  Click the "arrow" icon in the upper right side of your screen.
    Click the pictures you'd like to share via email (they will show a little checkmark when selected).
    Click the "share button at the lower left corner of your screen...
    Taa daa!
    Bob

  • How can I send a large pdf file (42MB) attachments by icloud ??

    How can I send a large pdf file (42MB) attachment by email in Icloud ???

    That's a bit excessive.  The website http://convert.neevia.com/pdfcompress/ can compress files up to 5 MB in size. You may want to print to PDF single smaller pages, or print the document and scan it one page at a time to PDF, and then use the PDF compress tools to shrink it further.

  • How can I send email from my yahoo alias account in iPhone5 mail?

    How can I send email from my yahoo alias account in iPhone5 mail?
    I have 2 email accounts: [email protected] is an alias of [email protected]
    In my old iPhone3 I had these accounts set up so that I could send and receive email from both accounts. I did this using the following settings:
    ‘Other’ POP account info:
    Name: xyz
    Address: [email protected]
    Description: alias
    Incoming mail server:
    Host name: pop.mail.yahoo.com
    User name: [email protected]
    Password: password for yahoo account
    Server port: 995
    Outgoing mail server:
    SMTP: smtp.o2.co.uk (o2 is the name of my phone network)
    Server port: 25
    ‘Yahoo!’ account info:
    Name: xyz
    Address: [email protected]
    Password: password for yahoo account
    Description: Yahoo!
    Outgoing mail server:
    Primary server: Yahoo! SMTP server
    Server port: 465
    I’ve tried using the same settings in my new iPhone5, but it doesn’t work. I can receive mail to both accounts, and can send from the Yahoo account, but I cannot send mail from the alias account. When I try, it displays the message: “Cannot send mail. A copy has been placed in your Outbox. The recipient ‘[email protected]’ was rejected by the server”.
    I’ve tried to configure the POP alias account using combinations of ‘pop.mail.yahoo.com’, ‘pop.mail.yahoo.co.uk’, ‘apple.pop.mail.yahoo.co.uk’ and ‘apple.pop.mail.yahoo.com’, for the incoming host, and ‘smtp.o2.co.uk’, ‘smtp.mail.yahoo.com’, ‘smtp.mail.yahoo.co.uk’, ‘apple.smtp.mail.yahoo.com’ and ‘apple.smtp.mail.yahoo.co.uk’ for the outgoing mail server. None of these have worked.
    I’ve also tried setting it up using IMAP instead of POP without success. I tried configuring it using combinations of ‘imap.mail.yahoo.com’, ‘apple.imap.mail.yahoo.com’, ‘imap.mail.yahoo.co.uk’ and ‘apple.imap.mail.yahoo.co.uk’ for the incoming mail server and ‘smtp.o2.co.uk’, ‘smtp.mail.yahoo.com’, ‘smtp.mail.yahoo.co.uk’, ‘apple.smtp.mail.yahoo.com’ and ‘apple.smtp.mail.yahoo.co.uk’ for the outgoing mail server.
    Yahoo say that if I can't send Yahoo! Mail from my mail program, I may be accessing the Internet through an ISP that is blocking the SMTP port, and that if this is the case, I should try setting the SMTP port number to 587 when sending email via Yahoo!'s SMTP server. I don't think that this is the problem, but I tried it just to make sure - without success.
    I’ve also heard that the problem might have something to do with the SPF settings of my alias domain provider. I’m not too sure exactly what SPF settings are, or how to change them, but from what I can gather it seems unlikely that this is the problem given that I was able to send mail from my alias account on my old iPhone3.
    Any help much appreciated: how can I get my alias account to send emails in iPhone5 mail?
    Many thanks,
    Patrick

    A new development: I've tried sending emails from the alias several times over the past 24 hours, but in general I've deleted them if they haven't sent within about half an hour.
    However, one of the messages I left sitting in the outbox did send successfully in the end, but this took about an hour.
    So: perhaps my problem is not in fact that I am completely unable to send mail from my alias, but that I can only do so intermittently and extremely slowly, and by ignoring the "cannot send" message.
    Any help appreciated.

  • How can I select multiple photos without tapping on each one individually

    How can I select multiple photos without tapping on each one individually?

    Op: without tapping on each one individually
    tap all the photos you want to delete.
    Note what the OP is asking.

  • How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

    How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

    Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.

  • How can I create multiple sales orders with reference to one contract?

    Hello Gurus,
    Can you please how can I create multiple sales orders with reference to one contract?
    thanks!
    Rakesh

    hi
    Lets consider example
    In your contract for line item 1 you have entered qty 100
    You careated sales order with 70 quantity, and now you want to creat another sales order for 30
    For this first you need to check what is your item category in contract (VA42)
    Goto VOV7
    SPRO - IMG  - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
    Make the completion rule = B Item is completed after full quantity has been referenced

  • How can I select multiple photos of files without selecting each individual one

    How can I select multiple files or photos without having to select each individual one? Like you can do on Windows

    Op: without tapping on each one individually
    tap all the photos you want to delete.
    Note what the OP is asking.

Maybe you are looking for

  • How to use multiple dimension attributes in SCOPE function

    Hello everyone, Need urgent help on the following: The requirement is, when [EMPLOYEE ONSHORE OFFSHORE] attribute of EMPLOYEE dimension having value "ATC Onsite" or "Permanent Onsite", "Onsite CPC" measure will have same the value of "Forecasted Blen

  • How to grant select permission to all the tables in the user

    Hi All, I have 5 tables in one user, now i want to give only select privilege to another user on those tables. Please help me to solve this issue. Thanks in Advance. Thanks and Regards, chiranth

  • HD to SD itunes films

    I bought a film in HD and then realised I wouldn't be able to put that film onto my ipod nano. Is there a way of changing this film to become an SD film so that i can put it on my ipod nano. I don't mind that the price is higher for HD I just really

  • Ipad having lines on screen while using

    I have an ipad 1. Never been dropped or wet. One morning it has this lines. horizontal lines when ipad is in portrait mode. the ipad still functions normally but these lines appears and in a few seconds it is gone and then after hours of using it, th

  • OC4J  10.1.3 WSA -assemble "Duplicate type name" error

    I am trying to expose a Java class as a web service using the WSA tool assemble command. The return result of one of the methods is reasonably complex and includes two variables the classes of which both extend the same base class e.g. (bean bits mis