How can I set a delay lock on iPad?

Hi
I would like to limit my four year old son playing his iPad reduction.
Is there iPad have a time lock settings or Apps?
Thanks!

No, if you want to stop the app after a time, there is not a way.
Sorry....
Only for locking after inactivity.

Similar Messages

  • How can I set up personal hotspot on iPad 3

    How can I set up personal hotspot on iPad 3, I use 3G services from Etisalat  SIM

    If your carrier supports the personal hotspot on the iPad (and some carriers only support it on the iPhone) then it should appear in Settings > General > Cellular Data > Personal Hotspot - if it doesn't appear then contact your carrier in case they don't support it or it might be an extra fee/subscription with them
    Personal hotspot : http://support.apple.com/kb/HT4517

  • How can i set rediffmail into my new ipad

    how can i set rediffmail into my new ipad?? plz help me out..

    Google for:
    setup rediffmail on iPad
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I am a Brit living in Germany. I really need to be able to purchase from the German iTunes Store (in €) and the English one (in £). How can I set this up from my iPad?

    I am a Brit living in Germany. I really need to be able to purchase from the German iTunes Store (in €) and the English one (in £). How can I set this up from my iPad?

    Technically correct (the best kind of correct)
    Now if the Op has and retains a UK account with billing address and UK paymant card - He/She can continue to use the UK store in Germany - Apple does NOT use IP address blocking just a valid paymant card attached to a postcode !
    Basically the first four of your paymant card are country codes.
    What the op needs to do if he/she now has a Germany address and payment method (could just be German € value gift cards) is to open a separate German iTunes Account !
    On a PC/Mac its very easy to change stores, however iOS has it a bit more difficult.
    In fact i would recommend the Op sets up a new German account and credentials on a PC/Mac first.
    And doing so just means opening the store in iTunes scrolling to the bottom of the screen and clicking on the littler circular flag in the bottom right.
    After that the browser window is populated with loads of similar disc flags. Clicking any take you to that regional store where provided you have a valid address (Postcode/Zipcode actually) and payment method local credit/debit some prepayment VISA cards or just a gift card you can create a local account.
    Oh and because Apple do NOT use IP addressing you don't actually have to be present in the country of that store. Its against to terms of the EULA but it works !
    Back to the iOS device
    Tap Settings/iTunes & App Store /Apple ID (that will probably be showing the UK account set up).
    In the window that opens tap log out
    Now  change the ID to the new German name and password and in the next window make sure the flag selected is that of Germany (when in Germany)
    When buying from the UK store follow that path again log out of the German account and re-log in using the UK ID
    As it happens I have a UK Portuguese and US account all active because I have residences in all three - and can visit any of the stores from anywhere.

  • HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

    Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

    Go to Settings>iCloud and sign in with your Apple ID to create the account.  Then turn on the data you wish to sync with iCloud.  See http://www.apple.com/icloud/setup/ios.html.

  • Don't see the green rectangle when taking photo, 2. How can I set up viber on my iPad

    1.When taking photo with this iPad, I don't see the green rectangle. My friend told me that in order to take a clear picture, you need to see the green rectangle. When I take a picture of myself, then I see it. Why is that?
    2. How can you set up Viber? Does Viber can make long distance call back to US when I am out of the country? For example: if I am in Hong Kong, I want to make a call back home to a US phone #, is there any charge. What about SMS? The people I call or SMS have to be on Viber also?
    How can I see your response? Are you going to email me? My email address is [email protected]
    Thanks,
    Christine

    Have you checked Skype's website regarding the ability to do this with their iPad app?

  • How can I set up Skype on my iPad to delete chats?

    I am therapist and the chats on Skype are confidential. On my mac, I have set it up to delete all chats when I shut down Skype but on my iPad I can't manage this. How can I delete chats and chat history on the iPad.

    Have you checked Skype's website regarding the ability to do this with their iPad app?

  • How can I set a delay between the measuremen​t of different channels..​.?

    Hello everyone,
    I am using Labview 8.0, and a PCI 6221 card. (windows XP).
    I am using the 8 AI of the card to measure 8 Voltages (diff. mode).
    The problem I have is that I get an offset except on the first channel I measure. If I set the DAQ assistant like this : AI0;AI1;AI1. This is what I measure : 0.320V;0.1695V;0.168V
     I only get the offset  with the first AI1 and not the second AI1 (0.168 is the correct value). I suppose the multiplexer hasn't got the time to change impedance when changing from AI0 to AI1.
    I have attached a simplified version of my program where I am measuring 3 channels, and generating a square wave analog output.
    My idea is to introduce a delay between the change of channels....  Is that a good idea...? and I am sure there is a very simple way to do this based on my program, but I don't know how. How long should the delay be?  Or any other idea...?
    Thanks for your help,
    Marc
    Attachments:
    forum.vi ‏71 KB

    If I choose just one channel ( AI0, AI, AI2,....or AI7) I have no offset. The offset only occurs when I set more than one channel to be measured ( but the first channel in the order of reading is always fine what ever it is). I have explained my problem in a previous post :
    http://forums.ni.com/ni/board/message?board.id=170​&message.id=257677&query.id=32291#M257677
    I have some noise on my measures (roughly +/5 mV), so for the moment I am taking 1000 samples every 1ms on each channel and making an average of the 1000 samples. 
    I will try your solution : taking a look at the first points of my measures to see if the offset goes away quickly or not. However since I have been  making an average on 1000 points at 1Khz, if I get a 2mV offset (after making the average), it means there are many points conerned by the offset.... I will see that anyway when looking at the 1000pts.
    I don't have much experince in this, but I am surprised I have to deal with this kind of multiplex problem on a NI card. What do you think about it...?  Does it surprise you...? What could I be doing wrong ?
    Thanks a lot for your help anyway 
    Marc

  • HT201441 If the previous owner died, how can I get an Activation Lock fo iPad mini?

    I bought an iPad mini which is currently linked to an Apple ID.
    but after the last updating I couldn't bypass the activation screen because the owner of the account has died; assure he was only own the account and he never possessed the device.
    Whatever the case, it is Impossible to contact with the previous owner!!
    please help me:
    how  to activate my iPad? and how to change the Apple ID?
    thanks

    Greetings to you
    I have such a problem
    Is there a way to activate by correspondence
    It is not a big problem, and Apple is the only one that you can repeat resolved
    Please reply us
    Thank you

  • How can I set the home page in iPad safari?

    Opening Safari, the screen shows the last page used. Is it possible to set a home page so that, for example, Sfari always opens with the Google search page?

    Safari doesn't have a homepage as such, but you can create a homescreen shortcut for a particular page : go to the page that you want and then tap the icon of the box with the arrow coming out of it to the left of the URL address field and you should get an option to 'Add To Home Screen'. You can then just tap shortcut on your homescreen to open Safari on that page (it will still re-open any other tabs that you had open when you closed Safari)

  • How can I set the Lock Model and data structure ?

    Hi ,
    I just have two questions about JE:
    1) Is there some method for me to set the lock mode level , such as record lock, page lock and database lock in JE?
    2) I learned that there are Btree and Hash,etc , data structures , How can I set the data structure when using JE ?
    Thanks in advance !
    Chris

    I think you're confusing our DB (C-based product) with JE. JE does not have lock mode levels, page locks (it does not have pages), or database locks. JE only has the BTREE method, it does not have the HASH method. For JE, please be sure to reference the JE doc page:
    http://www.oracle.com/technology/documentation/berkeley-db/je/index.html
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • HT5620 How can I set up two separate accounts on one iPad?

    How can I set up two separate accounts on one shared iPad?

    The iPad is meant to be a single user device.
    It is possible to use multiple ID's on an iOS device, but when you switch ID's and download content with another ID, you associate the device with that ID for 90 days and lock yourself out of the other ID for that 90 day period.
    So while it is possible, it's not advisable.

  • How can I set one loop's frequency as a slave of another loop ?

    I have 2 loops in parallel. The first runs at 500Hz. The AIread controls the frequency. How can I set the second one at 100Hz ? It is very easy to set it with local variable, but really not clean. The second loop must not use the CPU while waiting the next 100Hz tick. Is it possible ? I am trying to use occurrence, but the second loop will always (I think) use CPU while waiting next tick !
    Is it possible to set one loop in one thread and the other one in another thread ? Then set each thread to a CPU (I use a bi-xeon PC)
    Thanks

    cariboo wrote in news:5065000000080000001EBE0000-
    [email protected]:
    > I have 2 loops in parallel. The first runs at 500Hz. The AIread
    > controls the frequency. How can I set the second one at 100Hz ? It is
    > very easy to set it with local variable, but really not clean. The
    > second loop must not use the CPU while waiting the next 100Hz tick. Is
    > it possible ? I am trying to use occurrence, but the second loop will
    > always (I think) use CPU while waiting next tick !
    > Is it possible to set one loop in one thread and the other one in
    > another thread ? Then set each thread to a CPU (I use a bi-xeon PC)
    > Thanks
    One solution is to place a case inside the loop which run at 500 Hz. Put
    your 100Hz code inside the True case. Use the "Quot
    ient & Remainder"
    funtion and the iteration counter to execute the true case every fift
    execution of the 500Hz loop.
    This may not work if the 100Hz code use to much time, it will then delay
    the 500Hz loop.
    I would go for the occurences solution. The wait will use some CPU
    resources while waiting but i don't think that should be any problem (when
    done correctly).
    Rolf

  • How can I set up a 2nd user on mac pro

    want a family member to be able to log in on my desktop mac without access to my applications. How can I set up 2nd user?

    System Preferences > Accounts > ...
    Click on the lock in the bottom left and enter your Admin Username and password.
    Click on the Plus [+] button under the left column.
    Create a new user, generally NOT [ ] allow user to administer this computer.
    This user is completely separate, can have their own email, their own desktop, and cannot mess up your settings on shared Applications or email. They WILL have access to Applications in /Applications, but not the ones in /Users/<yourname>/applications.
    If you need additional restrictions, use Parental Controls.

  • How can I set a password on my Mac Mini so someone else cannot open it and read emails, etc.?

    How can I set a password on my Mac Mini?  Someone else is reading my emails.  I would like to be able to lock it so nothing on it could be seen without a password.  Is that possible?  How?

    So uncheck the automatic login after making sure you know your password and it will require a password on startup.
    You can also go into the security preferences and have the machine lock itself once the screensaver is activated. This is sometimes controlled from the screensaver preferences as well.
    You could also go nuts and activate multiple users where your name appears in the menu bar. When you walk away from the machine you can use that menu to take you to the "login window", effectively locking your machine.

Maybe you are looking for