How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)

Similar Messages

  • The default priority setting in Mail is set to "normal"  and is causing emails I send to be sent with red priority flag. How can I set default priority to low = no flag?

    The default priority setting in Mail is set to "normal"  and is causing emails I send to be sent with red priority flag.
    I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
    Thank you for advising,

    Try deleting the .plist.
    Quit the application.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
    Open the application and test. If it works okay, delete the plist from the desktop. 
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • How can I set default values for Allocate Mode in AO config?

    Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
    Solved!
    Go to Solution.
    Attachments:
    generateWaveformFIFO.vi ‏15 KB

    Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
    Misha

  • How can I set the polarity / range of NI 6014 for 0.0V - 10V?

    How can I set the polarity / range of NI 6014 for 0.0V - 10V?

    Nilton,
    The NI 6014 only has bipolar (10V to -10V) mode available, not unipolar (10V to 0V). Look into our E Series boards for both unipolar and bipolar operation.
    Ames
    Applications Engineering
    National Instruments

  • Where can i set the download options on the iPod for SD rather than HD movies?

    where can i set the download options on the iPod for SD rather than HD movies?

    In the Summary pane for the iPod in iTunes.  Check the box that says Prefer standard definition videos

  • How can I connect my TV sony bravia to Imac for display !

    How can I connect my TV sony bravia to Imac for display ! I did it before but a week ago crash my sistem and been to apple store london to fix it and wend I come home I can not reconnect the tv to imac ! please help !!!!!!!!!!!

    I BUY A CABLE FROM AMAZON.CO.UK AND MY iMAC WAS WORKING WITH THIS CABLE BUT AFTER THEY (APPLE STORE REGENT STREET ) REPARIT NOW IS NOT RECONICE THE DISPLAY !!!!!

  • How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

    Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

    Sean and Andy -
    I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
    So here's what does NOT work for me... 
         (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
         (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
         (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
         (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
         (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
         (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'--  routers, but does not show mine. (??!!)
         (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
         (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID! 
    So, now asking Sean and Andy (or anyone else) for further suggestions... ???  As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
    Any advice would be appreciated!  TIA.
    Ed

  • How can I set a custom resolution on a MacbookAir for an external monitor?

    I've been trying to set a custom resolution on my macbook air for an external monitor but the only options displayed are 1280x1024 and 800x600. How can I bring up more options? Thanks!

    Your Mac sets those resolutions (and the display NAME) based on the information your display provides when a query is sent at Startup. If those are the only resolutions shown, then your display has said that is all it can do.
    What display is this, and what Interface is being used?
    This pane will tell you more about what the display has reported:

  • How can I set the timebase in the FPGA API for the NI 9853 CAN module?

    Hallo,
    is there anybody familiar with cRIO, especially the NI CAN 9853 Modul?
    When starting communication with a CAN Bus  you can get a receiving CAN Frames from the FPGA I/O Node with a timestamp.
    How can  I set  this  timebase in the CAN Controller, because the CAN communication starts every time with the same timebase.
    Compared to the CAN API  on a PC the timebase for the communication is set when the Open Frame API VI is used?
    From that time the CAN Contoller assume the timebase from the PC.
    Whats about the FPGA API?
    Martin

    Hallo Dirk,
    thanks you
    for your answerer regarding my question.
    The last
    question belongs to my intention, to get absolute Timestamps from the NI 9853
    CAN interface. As you said it always starts from zero when starting the
    application.
    For my application
    I would like to get a timestamp with the local time I start the CAN communication
    and every CAN Frame should be logged with the Timestamp it is actually send on
    the CAN BUS.
    How can I achieve
    it?
    My first
    thoughts were to add up the timestamp for every CAN Frame counted from zero to
    an absolute Timestamp when starting communication. But I have got some wrong values.
    Maybe I did something wrong using the high and low part of the Timestamps I got
    from the CAN API.
    Do you have
    a suggestion for me?
    MartinW      

  • On DPS how can I set the layers in the correct order for adobe viewer?

    How can I set it so the icons appear behind the apple the same as the first picture but for adobe viewer as well

    Turn the apple into a two state MSO set to autoplay once and stop on the last image.
    I have a DPS course on lynda.com you might benefit from. If you don’t have a subscription, this link will get you a 10 day trial: http://bit.ly/1xHYd0i
    You should also download Bob Bringhurst’s DPS Tips app from the app store.

  • How can I use my Iphone as wireless internet receiver for my MacBook Pro?

    Can anyone tell me how to use my Iphone 4 a wireless internet receiver for my macbook pro? Thanks & greeting from the Netherlands! Matthijs

    Apple!!!! Please listen to your customers!!!!
    http://finance.yahoo.com/news/Smartphone-Fans-Want-FM-iw-1184795842.html?x=0&.v= 1
    Give us or make us pay for FM app already!!!!!
    http://www.tomsguide.com/us/Apple-iPhone-iPod-FM-Receiver,news-4855.html

  • How can I set the window options for command-N?

    Hi,
    I have let the Mac OS-X software update run (Java and a few other things), and now when I want a finder window by clicking on the smiling blue face or with command-N, I get a stripped window with only the volumes but no tool bar nor the folders short cuts. How can I restore the full window by default? I can still get the whole window set from the menu bar or with a 3 keys command, but I don't remember where I can set that to be the default window... thanks!

    Oh Sorry, I have found it "show tool bar" in the Presentation menu!

  • How can we set default value within html:file

    Hai,
    To set default value to text box i use the following code. It works well.
    <html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
    <html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?

    Hi,
    guess that one option in a RowImpl would be to check if the attribute is null or if the attribute value can be found in the VO that populates the list. If first is true or seconds false (cannot be found) you return the first value of the VO, making it the current attribute value
    Frank

  • How can I set default value to a transient parameter  in the VO

    I have created a transient parameter in the VO, which is type of boolean.
    When I try to input the "true" or "True" or "Y" in the 'default value',
    and then running the programm, but all failure.
    so I don't know how can i do.
    Genuinely waiting for you help, thanks in advance.

    Hi Sumury,
    First of all you could check if this transient attribute is read only. to check this, edit the VO and select the transient attribute under the Attributes tab. Then verify if it is marked as "Updateable Always" on the right-hand section.
    If it is updateable, then try setting the default value on the VO Implementation class: open the xxxVOImpl class, go to the transient attribute's setter (setxxx()) and change it to:
    <code> if (getXXX() == null) setAttributeInternal(XXX, "Y");
    else setAttributeInternal(XXX, value);</code>
    This might work. If it does not, then please post the exact message you are receiving when running the app.
    Hope this helps!
    Thiago

  • How can we set the profile options to increase OPP response Time

    Hi All,
    While running the concurrent program to merge the data template and rtf template we got the following message in the log file.
    Executing request completion options... ------------- 1) PUBLISH ------------- Beginning post-processing of request 9079946 on node G2C-IDEV-02 at 21-SEP-2007 02:04:49. Post-processing of request 9079946 failed at 21-SEP-2007 02:19:53 with the error message: The Output Post-processor is running but has not picked up this request. No further attempts will be made to post-process this request, and the request will be marked with Warning status. Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary. --------------------------------------
    Thanks in advance

    Hi ,
    There are 2 new profiles options that can be used to control the timeouts. Depending on the error message, one of the following solutions needs to be implemented.
    Profile Option : Concurrent:OPP Response Timeout
    Internal Name : CONC_PP_RESPONSE_TIMEOUT
    Description : Specifies the amount of time a manager waits for OPP to respond to its request for post processing.
    Profile Option : Concurrent:OPP Process Timeout
    Internal Name : CONC_PP_PROCESS_TIMEOUT
    Description : Specifies the amount of time the manager waits for the OPP to actually process the request.
    Note: The profile options are available as of $FND_TOP/patch/115/sql/AFCPOPRB.pls 115.3 and are included in Patch 4125550 11.5.10 CU2 for ATG Product family.
    Solution A
    Option 1: Increase the value (in seconds) for the profile option 'Concurrent:OPP Response Timeout'.
    Option 2: Increase the number of processes or threads (or both) of the OPP via Oracle Applications Manager (see Note 291792.1 for the detailed instructions)
    Solution B
    Increase the value (in seconds) for the profile option 'Concurrent:OPP Process Timeout'.
    Workaround
    The timeouts can also be altered directly in the package AFCPOPRB.pls :
    -- Default timeout values for waiting on a response to a request (seconds)
    TIMEOUT1 constant number := 120;
    TIMEOUT2 constant number := 300;
    TIMEOUT1 and TIMEOUT2 corresponds to respectively OPP Response Timeout (solution A) and OPP Process Timeout (solution B).
    Cheers
    Ranjit.

Maybe you are looking for